ZKTeco AQD-H35 Handleiding

Bekijk gratis de handleiding van ZKTeco AQD-H35 (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 40 mensen en kreeg gemiddeld 4.1 sterren uit 8 reviews. Heb je een vraag over ZKTeco AQD-H35 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

User Manual

Air Quality DetectorQD-H35 A

Version: 1.0

Display method: Common Screen display

Atmospheric preure: 86Kpa to 106Kpa ss

Detection method for CO2: Infrared (NDIR)

Detection method for PM: Laser scattering

Sampling time: 1.5 seconds

Product ze: 90*90*50mm Si

Concentration unit for CO2: PPM

Concentration unit for PM: ug/m3

Power source: Lithium battery with 2000 mAh capacity;

5V DC power charging via micro USB port

Product weight: 200g

Product Description

This product is an air quality monitor that detects Carbon

dioxe (CO2) in real-time monitoring. id

2

Considerations

Please read the instructions carefully before using this

device.

Please let the device work short mins outdoors before

use for most accurate results .

Please keep the manual handy for quick reference and

tubleshooting. ro

Precautions

Avoid covering the air intake areas during use to avoid

inaccurate measurements.

Avoid use of solnts to cleathe product as residual ven

fumes will skew air quality readings.

Avoid water or other liquids near the product to avoid

electrical damage.

Do not allow unauthorized modi catioor repair of this n

product.

Features:

-Common Screen display

-Test variables: Carbon dioxide (CO2)

-Large 2000mAh capacity Lithium battery

-5V Micro USB charging

-Low battery warning

3

Instruions ct

1. Start Up

When you long-press the power bton, the air quality ut

monitor will boot up.

It would auto ash each 5 seconds switching data from

PM1.0, PM2.5, PM10.

4

Product Key Funion Description ct

Figure 1

Figure 2

Figure 3

①

Display reensc

②

Power bton ut

1.

Long press for 3 seconds to turn device on/o ;

2.Single click to switch Celsius and Fahrenheit;

3.Double click to turn on/o Alarm function(when turn on alarm

function, it would beep sound once CO2 value more than 0M)100PP

③

Air hole ofack b

④

Battery cover of back

⑤

Foot pads

⑥

Side air ow holes

⑦USB charng portgi

5

2. About Charging

When low battery icon is displayed, the device needs to be

charged. Insert the included or another compatible micro

USB charging cable into the deve. Attach the other end ic

to a USB DC charger (such as a smart phone charger) that

outputs DC 5V at >=1000mA. Fully charge for at least 2-3

hours before use. Avoid charging with a USB computer

port which only outputs 500mA.

3.Parameters

CO2 technical indicators

Measung range: 400 to 5000MSensoror CO2: Infrared ( NDIR) riPP f

Resolution: 1 PPM

Pruct List od

Air Quality monitor x 1

Micro USB charging cable x 1

Product Manual x 1

6

Copyright © 2021 ZKTECO CO., LTD. All Rights Reserved.

Ctra. Fuencarral 44. Edicio 1, Planta 2.

28108 Alcobendas, Madrid. Spain

Phone: +34 916 532 891

Mail: sales@zkteco.eu

www.zkteco.eu

Product specificaties