Zebra TC58e Handleiding


Bekijk gratis de handleiding van Zebra TC58e (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 10 mensen en kreeg gemiddeld 5.0 sterren uit 5.5 reviews. Heb je een vraag over Zebra TC58e of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/4
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions
worldwide. All other trademarks are the property of their respective owners. © 2025 Zebra Technologies Corp. and/or
its affiliates. All rights reserved. | zebra.com | ip.zebra.com
MN-005305-01EN Rev A
TC58e Custom Cup Installation Guide
This procedure provides instructions for replacing a TC58e custom cup, involving the removal of the old
cradle, swapping cables, and securing the new cup.
1. Unscrew the old cradle cup from its base using a Philips (PH02) screwdriver.
2. Lift the cup to access the inside of the cradle base.
2
4. Using tweezers, lift the sticker on top of the cable connector.
5. Remove the plastic bezel.
3
6. Disconnect the USB cable and power cable.
7. Connect the new cup USB cable to the connector on the base. Secure the cable to the base with a new
cable tie and position it under the middle frame. Connect the power cable to the connector on the base.
8. Position the plastic bezel between the cable (1) and the PCB (2).


Product specificaties

Merk: Zebra
Categorie: Niet gecategoriseerd
Model: TC58e

Heb je hulp nodig?

Als je hulp nodig hebt met Zebra TC58e stel dan hieronder een vraag en andere gebruikers zullen je antwoorden