Zebra RS6100 Handleiding

Zebra Niet gecategoriseerd RS6100

Lees hieronder de 📖 handleiding in het Nederlandse voor Zebra RS6100 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
RS5100/RS6100
Enterprise Hand Mount
Quick Start Guide
MN-004352-02EN Rev. A - 1/2023
ZEBRA and the stylized Zebra head are
trademarks of Zebra Technologies Corp.,
registered in many jurisdictions
worldwide. All other trademarks are the
property of their respective owners.
© 2023 Zebra Technologies Corp. and/or
its affiliates. All rights reserved.
Zebra Technologies |
3 Overlook Point |
Lincolnshire, IL 60069 USA
www.zebra.com
Warranty
For the complete Zebra hardware product warranty statement, go
to: zebra.com/warranty.
Service Information
Before you use the unit, it must be configured to operate in your
facility’s network and run your applications.
If you have a problem running your unit or using your equipment,
contact your facility’s Technical or Systems Support. If there is a
problem with the equipment, they will contact the Zebra Global
Customer Support at zebra.com/support.
For the latest version of this guide go to:
zebra.com/support.
Additional Information
For information on using the RS5100 or RS6100, refer to the
corresponding product guide available at: zebra.com/support.
Enterprise Hand Mount
The Enterprise Hand Mount allows the RS5100/RS6100
to be worn on the back of your hand and provides a
remote finger trigger. The hand wrap is available for
right-handed and left-handed users and in multiple sizes,
distinguished by the color of the stitching:
•Small = white
•Medium = black
•Large = blue
To attach the Enterprise Hand Mount:
1. Install the hand wrap to the mount, noting the position
for right or left-handed user.
2. Position the hand mount on the hand.
3. Install the scanner onto the mount.
Install Hand Wrap for a
Right-Handed User
To install the hand wrap to the mount for a right-handed
user:
1. Insert the trigger cable and button through the trigger
slot.
2. Insert the mount strap through the left slot of the mount
(as it sits on your hand) and slide under the mount.
3. Insert the mount strap up through the remaining slot of
the mount and fasten the strap end.
Install Hand Wrap for a
Left-Handed User
To install the hand wrap to the mount for a left-handed
user:
1. Insert the trigger cable and button through the trigger
slot.
2. Insert the mount strap through the right slot of the
mount (as it sits on your hand) and slide under the
mount.
3. Insert the mount strap up through the remaining slot of
the mount and fasten the strap end.
Position Hand Mount on Hand
To position the hand mount on the hand:
1. Slide your hand through the hand wrap, with your
thumb through the smaller opening and remaining four
fingers through the larger opening. Note the position for
a left or right-handed user.
2. Adjust the strap to a comfortable position to fit
securely.
3. Slide the strap through the buckle and secure the end
of the strap in place.
NOTE: The snap under the strap is a safety
breakaway and is not used to secure the strap.
4. Position the finger trigger button to allow access by
your thumb and fasten it in place.
5. Align the mount on the hand wrap:
a. Lift the mount strap.
b. Detach and lift the mount.
c. Reposition the mount on the hand wrap to align the
mount with your middle finger knuckle.
d. Fasten the strap.
Install RS5100/RS6100
To install the scanner onto the Enterprise Hand Mount:
1. Align the contacts on the scanner with the contacts on
the mount and engage the slot on the scanner (located
at the top of the scanner on the backside) with the
opening at the top of the hand mount.
2. Push down on the scanner to snap into place.
Correct Installation
Incorrect Installation
Detach RS5100/RS6100
To detach the scanner from the Enterprise Hand Mount:
1. Press the release buttons on both sides of the mount.
2. Lift the scanner off the mount.
Cleaning the Hand Wrap
Before cleaning the hand wrap, remove the electronics:
1. Unfasten the strap and detach the mount.
2. Slide the mount off the strap.
3. Remove the finger trigger button and cable from the
hand wrap.
4. Use an approved cleaning agent or mild detergent on
the hand wrap material only and air dry.

Product specificaties

Merk: Zebra
Categorie: Niet gecategoriseerd
Model: RS6100

Heb je hulp nodig?

Als je hulp nodig hebt met Zebra RS6100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Zebra

Zebra

Zebra FXR90 Handleiding

19 Maart 2024
Zebra

Zebra TC27 Handleiding

17 Juli 2023
Zebra

Zebra TC22 Handleiding

17 Juli 2023
Zebra

Zebra RS6100 Handleiding

2 Juni 2023
Zebra

Zebra GS20 Handleiding

14 Mei 2023
Zebra

Zebra RE40 DKRE Handleiding

12 Mei 2023
Zebra

Zebra VS20 Handleiding

12 Mei 2023
Zebra

Zebra CC5000-10 Handleiding

29 April 2023
Zebra

Zebra TC78 Handleiding

21 April 2023
Zebra

Zebra FS20 Handleiding

26 Maart 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024