Zebra MP72 Handleiding

Bekijk gratis de handleiding van Zebra MP72 (2 pagina’s), behorend tot de categorie Barcode lezer . Deze gids werd als nuttig beoordeeld door 42 mensen en kreeg gemiddeld 4.3 sterren uit 8 reviews. Heb je een vraag over Zebra MP72 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

NOTE: The CFS kit includes left and right filler caps.

Select the correct one according to the CFS mounting side,

as shown below in . Step 3

MP72

Customer Facing Scanner

zebra.com

Zebra Technologies | 3 Overlook Point | Lincolnshire, IL 60069 USA

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp.,

registered in many jurisdictions worldwide. All other trademarks are the property

of their respective owners.

© 2024 Zebra Technologies Corp. and/or its affiliates. All rights reserved.

Installation Guide

The Customer Facing Scanner (CFS) is an optional integrated device for

the MP72 that supports scanning barcodes, coupons, and loyalty cards

from customers’ mobile phones and paper.

CFS bracket holes align with corresponding openings on the MP72

flange for the long configuration, or on the MP72 lower housing for the

short and medium (flangeless) configurations.

Long (Flanged) Configuration

1. Remove the two screws on the MP72 flange.

2. Secure the CFS bracket (2) to the flange (1) using the two flange

screws. Torque screws to 12 +/- 0.25 in-lb.

Short or Medium (Flangeless) Configuration

Place the spacer (2) between the CFS bracket (3) and MP72 chassis (1),

and secure using the two screws provided with the CFS. Torque to 12

+/- 0.25 in-lb.

1. Remove the MP72 filler cap mounting screw.

2. Remove the MP72 filler cap.

3. Insert the CFS filler cap and hold in place.

4. Install the filler cap screw and

tighten until the filler cap is fully

seated.

Mount the CFS on either side of the

MP72 and connect it to the USB-A

port on the main PCB on the bottom

of the MP72.

Installing the Customer Facing ScannerInstalling the CFS BracketReplacing the Filler Cap

NOTE: The CFS kit MX72-SR000WW includes left and

right brackets. Choose the bracket according to the

CFS mounting side.

Product specificaties