Zagg Cover iPad Air Handleiding

Zagg Diversen - Overig Cover iPad Air

Lees hieronder de 📖 handleiding in het Nederlandse voor Zagg Cover iPad Air (4 pagina's) in de categorie Diversen - Overig. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT:

www.ZAGG.com/faq

NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT: www.ZAGG.com/faq

To reach a trained customer service representative, please use one of the following:

ZAGG.com/support/contact.php | questions@zagg.com

1-800-700-ZAGG [9244] | 00-1-801-839-3906 for international customers

For unparalleled scratch protection for your iPad, we recommend ZAGG’s invisibleSHIELD®.

PATENT PENDING | NASDAQ: ZAGG | MADE IN CHINA

iPad®, Apple®, and iTunes® are registered trademarks of Apple Inc.

ZAGG®, invisibleSHIELD®, and ZAGGkeys™ Cover are trademarks or registered trademarks of ZAGG Inc.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1: This device may not cause harmful interference, and 2: This device must accept any interference

received, including interference that may cause undesired operation

COVER

*WARRANTY REGISTRATION

Your ZAGGkeys™ Cover comes with a one-year manufacturer’s warranty. In order to activate the

warranty, you must register your Cover as well as keep your purchase receipt. If you purchased your

ZAGGkeys Cover from ZAGG.com, ZAGG® has already registered it and has a copy of your proof of

purchase.

INSERTING/REMOVING YOUR iPAD® TROUBLESHOOTING

If your iPad® does not respond to your Cover there may be a simple

explanation such as a dead battery or an unsuccessful pairing. Please use

the following to help troubleshoot your situation. If none of the following

solve your issue, then please contact ZAGG customer service and one of

our trained professionals will be happy to assist you.

1. Restart your iPad by holding down the home and power button

simultaneously until it restarts. Let go of the buttons when you see the

Apple logo.

2. Turn your Cover o and back on. You should see the LED status light

illuminate brieﬂy, if not, charge your Cover.

3. After charging, turn your Cover on. If the LED status light does not

illuminate, and your keyboard doesn’t operate correctly, please contact

ZAGG’s customer support.

4. Forget and re-pair your Cover. On your iPad, select: Settings > General

> Bluetooth > On. If you see “ZAGGkeys Cover” listed as an available

device, touch the arrow to the right of it and choose to have your iPad

forget the device.

5. Push the PAIR button on your Cover and watch for the LED status light

to ﬂash blue.

6. Your iPad should display “ZAGGkeys Cover” as an available device.

Select it.

7. If your iPad gives you an error message, repeat the pairing process.

8. If you still can’t get your Cover to pair, it is possible your iPad needs to

have its software updated.

To update your iPad’s software, follow these steps:

1. Plug your iPad into your computer, and open iTunes®.

2. In iTunes, select your iPad.

3. Choose to check for software updates.

4. If an update is available, please install it. This will take a few minutes to

download from Apple®.

5. After your update is complete, repeat the troubleshooting process*.

* If you continually receive the same error message during pairing, or the above steps don’t work, please

contact ZAGG’s customer support for assistance.

To insert your iPad mini into the Cover,

start with the Cover’s keyboard in portrait

orientation with the hinge closed and on

the left. Then, with your iPad in portrait

mode and the volume control buttons

facing out (the Home button is on the

top), slide it into the hinge channel,

making sure it is ﬁrmly in place. For best

results, always insert your iPad with the

hinge closed and align its edges with your

Cover’s keyboard.

When your iPad is secure in the Cover,

you can open it, and cleverly placed

magnets, will activate your iPad’s

sleep/wake feature to help preserve

battery life. Simply open your Cover to

wake your iPad.

To easily remove your iPad, start with the

hinge closed. Open the hinge slightly

(enough that you can grasp the corner of

your iPad) and while securing the Cover,

pull your iPad away from the hinge.

To insert your iPad using the media mode,

start with the Cover’s keyboard in portrait

orientation with the hinge closed and on

the left. Then, with your iPad also in

portrait orientation (the Home button is

on the bottom), slide your iPad into the

hinge channel, making sure it is ﬁrmly in

place*. You will feel the magnets engage,

securing your device.

*NOTE: When your iPad is in media mode, it is somewhat

less secure in the channel as when in regular mode. Use

care when transporting it in this mode.

Volume Controls

Home Button

Volume Controls

Home Button

POWERING ON AND OFF

PAIRING YOUR ZAGGkeys™ COVER

THE FUNCTION (fn) KEY

To turn your Cover on, switch the POWER button to the ON position. A red

LED light will illuminate brieﬂy while the keyboard powers up. To turn your

Cover o, simply switch the POWER button to the OFF position.

Pairing your Cover with your iPad® is easy. It should only need to be paired

once, using the following directions. If the connection between your iPad

and Cover is ever lost, simply repeat these steps.

1. On your iPad select: SETTINGS > GENERAL > BLUETOOTH > ON.

2. Press the PAIR button on your Cover keyboard. A blue LED light will

ﬂash until your Cover and iPad are paired.

3. Your iPad will display “ZAGGkeys Cover” as an available device.

Select this option to complete pairing.

LED LIGHT PAIR BUTTON

LED LIGHT

ON POSITION

OFF POSITION

POWER BUTTON

The fn key operates all key functions listed below. To activate these

functions, hold the fn key down and press the desired key. For keys with

two function symbols, the fn key operates the bottom symbol. Holding

SHIFT and the fn key simultaneously operates the upper symbol.

FN + CAPS – Activates the CAPS Lock feature. When CAPS Lock is

on a blue indicator light will remain lit until it is turned o. To turn

CAPS Lock o, simply hold the fn key and press CAPS again.

FN + World Symbol – Toggles between international keyboards

(when activated in your iPad®’s settings)

FN + Battery Symbol – Indicates remaining battery life

FN + Backlight On – Activates your Cover’s backlight feature.

Pressing this key once will turn on the backlights at their dimmest

setting, pressing it twice will brighten the lights, and pressing it three

times will brighten them to their brightest setting.

NOTE: The backlights will automatically turn o after a couple seconds if not being used. Simply

begin typing again to activate them.

FN + Backlight O – Dims the backlights according to their selected

brightness until they turn o. For example, if your lights are at their

brightest setting, you would press this button once to dim the lights,

twice to set them at their dimmest setting, and three times to turn

the backlights o.

FN + Backlight Color Palette – Press to select your preferred

backlight color. Press repeatedly to cycle through available colors.

NOTE: The backlight feature must be turned on in order for the palette to work.

SHIFT

DEFAULT

FN + SHIFT

SHIFT

DEFAULT

FN + SHIFT

Product specificaties

Merk:	Zagg
Categorie:	Diversen - Overig
Model:	Cover iPad Air

Heb je hulp nodig?

Als je hulp nodig hebt met Zagg Cover iPad Air stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Diversen - Overig Zagg

Zagg Cover iPad mini Handleiding

19 Maart 2023

Zagg Cover iPad Air Handleiding

19 Maart 2023

Zagg Keys - bluetooth Handleiding

19 Maart 2023

Zagg Pocket Keyboard Handleiding

19 Maart 2023

Handleiding Diversen - Overig

Nieuwste handleidingen voor Diversen - Overig

Ewent EW3967 Handleiding

14 Oktober 2023

Ewent EW3974 Handleiding

14 Oktober 2023

Ewent EW3965 Handleiding

14 Oktober 2023

Ewent EW3705 R2 USB 2.0 Video Grabber Handleiding

14 Oktober 2023

Ewent EW3973 Handleiding

14 Oktober 2023

Ewent EW3971 Handleiding

14 Oktober 2023

Saitek CONTROL DECK FOR PC Handleiding

29 September 2023

Saitek 3D 380 2.1 Active Speakers Handleiding

29 September 2023

Saitek 3D 210 Stereo Speaker System Handleiding

29 September 2023

Saitek PRECISION CONTROL PACK Handleiding

29 September 2023