Yealink BH72 Handleiding
Yealink
Hoofdtelefoon
BH72
Bekijk gratis de handleiding van Yealink BH72 (2 pagina’s), behorend tot de categorie Hoofdtelefoon. Deze gids werd als nuttig beoordeeld door 19 mensen en kreeg gemiddeld 4.9 sterren uit 10 reviews. Heb je een vraag over Yealink BH72 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
BH72 & BH72 Lite
Bluetooth Headset
Quick Start Guide
V1.2
English /
简体中文
Package List
Note: We recommend that you use the included accessories, and other accessories may have
compatibility issues that prevent them from working properly.
BH72
(
BH72 Lite
)
USB 2.0 Cable
(USB-A to USB-C)
Storage Bag
Quick Start Guide
BT51-A Dongle or
BT51-C Dongle
BHC76 Wireless
Charging Stand
Power Adapter
Optional
Quick Start Guide
or
L
Charging
USB Charging
Wireless Charging (optional)
LED Indicator Status
Note: It takes two hours for USB charging and three hours for wireless charging to be fully
charged.
Note:
• We recommend to fully charge the headset when using it for the rst time. BH72 Lite does
not support wireless charging.
• The BHC76 is compatible with devices that support QI wireless charging, such as wireless
charging mobile phones and headsets.
Red
Charging
Green
Fully Charged
Green
Power on/off
"power on,
XX % battery
remains"
"power off"
Red
Green
Hold 2s
Power on
Power off
LED Indicator
Yealink BH72
Note: If your desk phone/PC does not have built-in Bluetooth, you need to use the BT51 dongle
to pair the headset. When the is plugged into the desk phone/PC and the headset BT51 dongle
is power on, the desk phone/PC and BT51 dongle will automatically connect.
Step1: Enter Pairing Mode
"pairing mode"
Power off State
Power on State
Step2: Select the Headset from Your Bluetooth Device
Hold
5s
"power on,
XX % battery
remains.
pairing mode"
Hold
3s
ON
"mobile one
connected"
Flashing Red and Green Alternately
Flashing Red and Green Alternately
Flash Red
Trying to Connect to
Teams
Connect to Teams
Successfully
Solid Red
Flash Purple
Solid Purple
Talking
Incoming Call
Busylight
Call Controls and Busylight
Press
1X
Accept
End
Reject
or
Push
Mute
or
Note: Only the Teams edition Teams.can connect to
Pull
Multi-function Button
Press
1X
Press
2X
Press
1X
Multi-function
Button
Music Controls
Customers Button
Hold
Press
1X
"XX % battery remains.
PC connected,mobile
one connected"
1.5s
Hold
1.5s
Press
1X
Press
1X
Open Teams Notication
Hold
2s
Siri, Google assistant...,
depending on mobile phone.
Press
1X
Activate Voice Assistant
Check the Battery and
Device Connection Status
Press
1X
Yealink USB Connect
(
PC
）
Yealink Connect App (Mobile
）
Download it from the Yealink website https://www.yealink.com/product/yuc.
Apple and the Apple logo are trademarks of Apple Inc.
Download the Yealink Connect App from IOS App Store or Android App Store.
Replace Ear Cushions
Software Management
1. Please use the power adapter provided by Yealink to get a more efcient charging
experience.
2. Please do not place any metal and magnetic cards on the charging board to avoid
abnormalities and damage to the charger.
3. Please do not charge too far away from the charging sign to get a more efficient
charging experience.
4. During use, if you nd the charging board or the charged device is overheated and the
charging stops (the indicator light keeps ashing), you need to remove the charged
device until it cools down, and then try charging again.
5. The indicator light of the charging stand keeps ashing, and it may be the following
three situations:
• The location of the charged device is not placed correctly. You need to replace the it.
After calibrating the charging position, you can charge the device normally until the
indicator light is always on.
• The charging stand has an overheating alarm. After the mobile phone or the charging
stand cools down, it will stop ashing automatically and enter the normal charging
state.
• Metal or magnetic cards may be placed on the charging board, and please remove
them.
Notes for BHC76 (optional)
Safety Guide for BHC76 (optional)
1. Do not disassemble the product by yourself or bring it near re and water to avoid
short circuit leakage or damage to the product.
2. Do not use the product in high temperature, humidity, and corrosive environment to
avoid damaging the circuit and causing failure to charge or other failures.
3. Do not expose the product to corrosive liquids. Otherwise, it will cause severe damage.
4. Do not disassemble or re-equip the product for any reason to avoid secondary failure
and burnout.
5. Do not place the product below -10°C or above 60°C.
6. Do not knock, throw or shake the product because rough methods will damage the
internal circuit board structure.
About Yealink
Yealink (Stock Code: 300628) is a global brand that specializes in video conferencing,
voice communications and collaboration solutions with best-in-class quality, innovative
technology and user-friendly experience. As one of the best providers in more than
140 countries and regions, Yealink ranks No.1 in the global market share of SIP phone
shipments (Global IP Desktop Phone Growth Excellence Leadership Award Report, Frost
& Sullivan, 2019).
Copyright
Copyright © 2022 YEALINK(XIAMEN) NETWORK TECHNOLOGY CO., LTD.
All rights reserved. No parts of this publication may be reproduced or transmitted in any
form or by any means, electronic or mechanical, photocopying, recording, or otherwise,
for any purpose, without the express written permission of Yealink(Xiamen) Network
Technology CO., LTD.
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for firmware downloads, product
documents, FAQ, and more. For better service, we sincerely recommend you to use
Yealink Ticketing system (https://ticket.yealink.com) to submit all your technical issues.
YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.
Web: www.yealink.com
Addr: No.1 Ling-Xia North Road, High Tech Park,
Huli District, Xiamen, Fujian, P.R.C
Copyright©2022 Yealink Inc. All rights reserved.
Teams Edition:
Pairing and Connecting Device
No Built-in Bluetooth Device
Power On State
Already pre-paired when leaving the
factory , automatically connected
Built-in Bluetooth Device
Align the
charging area
Teams/UC Edition:
How-to video
If your headset needs warranty service, the process is quick and easy.
Please go to https://ticket.yealink.com/page/headset/warranty-service.html
and submit RMA Claim to Yealink.
430104002073
包装清单
说明：我们建议您使用自带的配件，其他配件可能存在兼容性问题，无法正常工作。
USB 2.0 线
(USB-A 转USB-C)
收纳包
快速入门指南
BT51-A 蓝牙适配器
或
BT51-C 蓝牙适配器
BHC76 无线
充电底座
电源适配器
可选
Quick Start Guide
或
L
充电
USB 充电
无线充电 ( 可选)
LED 指示灯状态
说明：USB 充满电需要两个小时，无线充电需要三个小时才能充满。
说明：
• 首次使用时建议将耳机充满电。BH72 Lite 不支持无线充电。
• BHC76 兼容支持 QI 无线充电的设备，如无线充电手机、耳机。
红
充电中
绿
已充满
绿
对准可充电区域
开 / 关机
“开机，剩余
电量 XX %”
“关机”
红
绿
长按
2s
开机
关机
LED 指示灯
Yealink BH72
说明：如果你的话机 /PC 没有内置蓝牙，则需要使用 BT51 蓝牙适配器与耳机配对。当 蓝BT51
牙适配器插入话机 /PC 且耳机处于开机状态时，话机 /PC 与耳机自动连接。
第一步：进入配对模式
“配对”
关机状态
开机状态
第二步：从蓝牙设备列表中选择耳机
长按
5s
“开机，
剩余
电量 XX %
，配对”
长按
3s
ON
“设备一已连接”
红绿交替闪烁
红绿交替闪烁
红色闪烁
尝试与 Teams 连接
成功与 Teams 连接
红色长亮
紫色闪烁
紫色长亮
通话中
来电中
忙碌指示灯
通话控制与忙碌指示灯
按
1X
接听
挂断
拒接
或
推
静音
或
说明：只有 Teams 版本支持与 Teams 建立连接。
拉
多功能按键
多功能
按键
按
1X
按
2X
按
1X
音乐控制
客户键
长按
按
1X
“
剩余电量 XX %
，
设备一已连接，PC
已连接”
1.5s
长按
1.5s
按
1X
按
1X
打开 Teams 通知栏
长按
2s
Siri、谷歌助手……，
取决于手机。
按
1X
打开语音助手
查询耳机剩余通话时间与
设备连接状态
按
1X
Yealink USB Connect
(
电脑端
）
Yealink Connect App ( 移动端
）
从亿联网站 https://www.yealink.com/product/yuc 下载。
Apple 和 Apple 标志是 Apple Inc. 的商标。
从 IOS 系统 或 Android 系统的应用商店下载 Yealink Connect App。
更换耳罩
软件管理
1. 为了让您得到更高效的充电体验，请使用提供的电源适配器。
2. 请勿在充电板上放金属杂物或磁卡，避免充电底座异常或损坏。
3. 为了让您得到更高效的充电体验，充电设备请勿离充电闪电标
志太远。
4. 使用过程中如遇到充电板或充电设备过热导致停止充电（指示
灯一直闪烁），请取下充电设备，待冷却后，重新尝试充电。
5. 指示灯一直闪烁，可能下面三种情况：
• 位置没放置好，重新放置充电设备校准位置后直到指示灯常
亮，正常充电。
• 为保证一定的安全，充电底座具有过热报警，待手机或充电
设备自身冷却后，会自动消除闪烁情况，进入正常充电状态。
• 充电板上放金属杂物或磁卡，需取下金属物或磁卡。
BHC76 说明
BHC76 安全须知
1. 请勿将本产品自行拆卸或投入火中、水中，避免造成短路漏电
或损坏产品。
2. 请勿在高温、潮湿或腐蚀性环境下使用本产品，避免损坏电路
导致不能充电或其它故障。
3. 请勿将产品接触腐蚀性液体，否则会造成严重损坏。
4. 请勿以任何理由拆卸或改装本产品，避免造成二级故障及烧毁。
5. 请勿将产品置于小于 -10℃或者大于 60℃。
6. 请勿敲打、扔掷或强烈震动本产品，粗暴方式会损坏内部电路
板结构。
Regulatory Notices
Operating Ambient Temperatures
• Operating temperature: +32 to 104°F (0 to 40°C)
• Relative humidity: 5% to 90%, noncondensing
• Storage temperature: -22 to +160°F (-30 to +70°C)
Warranty
Our product warranty is limited only to the unit itself, when used normally in accordance with the operating instructions
and the system environment. We are not liable for damage or loss resulting from the use of this product, or for any claim
from a third party. We are not liable for problems with Yealink device arising from the use of this product; we are not
liable for nancial damages, lost prots, claims from third parties, etc., arising from the use of this product.
Explanation of the symbols
• DC symbol
is the DC voltage symbol.
• WEEE Warning symbol
To avoid the potential effects on the environment and human health as a result of the presence of hazardous
substances in electrical and electronic equipment, end users of electrical and electronic equipment should
understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal
waste and have to collect such WEEE separately.
Restriction of Hazardous Substances Directive (RoHS)
This device complies with the requirements of the EU RoHS Directive. Statements of compliance can be obtained by
contacting support@yealink.com.
Safety Instructions
Save these instructions. Read these safety instructions before use!
General Requirements
• Before you install and use the device, read the safety instructions carefully and observe the situation during
operation.
• During the process of storage, transportation, and operation, please always keep the device dry and clean, avoid
collision and crash.
• Please attempt not to dismantle the device by yourself. In case of any discrepancy, please contact the appointed
maintenance center for repair.
• Please refer to the relevant laws and statutes while using the device. Legal rights of others should be respected as
well.
Environmental Requirements
• Place the device at a well-ventilated place. Do not expose the device under direct sunlight.
• Keep the device dry and free of dusts.
• Do not place the device on or near any inammable or re-vulnerable object, such as rubber-made materials.
• Keep the device away from any heat source or bare re, such as a candle or an electric heater.
Operating Requirements
• Do not let a child operate the device without guidance.
• Do not let a child play with the device or any accessory in case of accidental swallowing.
• Please use the accessories provided or authorized by the manufacturer only.
• The power supply of the device shall meet the requirements of the input voltage of the device. Please use the
provided surge protection power socket only.
• Before plugging or unplugging any cable, make sure that your hands are completely dry.
• Do not spill liquid of any kind on the product or use the equipment near water, for example, near a bathtub,
washbowl, kitchen sink, wet basement or near a swimming pool.
• During a thunderstorm, stop using the device and disconnect it from the power supply. Unplug the power plug and
the Asymmetric Digital Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid lightning strike.
• If the device is left unused for a rather long time, disconnect it from the power supply and unplug the power plug.
• When there is smoke emitted from the device, or some abnormal noise or smell, disconnect the device from the
power supply, and unplug the power plug immediately.
• Contact the specied maintenance center for repair.
• Do not insert any object into equipment slots that is not part of the product or auxiliary product.
• Before connecting a cable, connect the grounding cable of the device rst. Do not disconnect the grounding cable
until you disconnect all other cables.
Battery Requirements
• Do not immerse the battery into water, which could short-circuit and damage the battery.
• Do not expose the battery to an open ame or leave the battery where it could be subjected to extremely high
temperatures, which could cause the battery to explode.
• Do power the handset off before removing the battery.
• Do not try to use the battery for the power supply of any device other than this handset.
• Do not open or mutilate the battery, released electrolyte is corrosive and may cause damage to your eyes or skin.
• Use only the rechargeable battery pack delivered with the handset or those rechargeable battery packs expressly recommended by
Yealink.
• Defective or exhausted battery should never be disposed of as municipal waste. Return old battery to the battery supplier, a
licensed battery dealer or a designated collection facility.
Cleaning Requirements
• Before cleaning the device, disconnect it from the power supply.
• Use a piece of soft, dry and anti-static cloth to clean the device.
• Keep the power plug clean and dry.
Troubleshooting
The unit cannot supply power to Yealink device.
There is a bad connection with the plug.
1. Clean the plug with a dry cloth.
2. Connect it to another wall outlet.
The usage environment is out of operating temperature range.
1. Use in the operating temperature range.
The cable between the unit and the Yealink device is connected incorrectly.
1. Connect the cable correctly.
You cannot connect the cable properly.
1. You may have connected a wrong Yealink device.
2. Use the correct power supply.
Some dust, etc., may be in the port.
1. Clean the por t.
Contact your dealer or authorized service facility for any further questions.
FCC CAUTION:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
ISED WARNING:
This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée
aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout
brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003. Cetappareilnumérique de la classe B estconformeà la norme NMB-003
du Canada.
Les communications effectuées au moyen de cetappareil ne sont pas nécessairement protégées des indiscrétions.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment should be installed
and operated with minimum distance 20cm between the radiator and your body.
Déclarationd'exposition aux radiations: Cetéquipementestconforme aux limitesd'exposition aux rayonnements ISED Canada établies
pour unenvironnement non contrôlé. Cetéquipementdoitêtreinstallé et utilisé avec un minimum de20cm de distance entre la source de
rayonnement et votre corps.
EU Regulatory Information
Support Frequency Bands and Power:
Bluetooth 2.4GHz< 20 dBm
Contact Information
YEALINK NETWORK TECHNOLOGY CO.,LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th oor, 1077ZX Amsterdam, The Netherlands
YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
Made in China
BH72
(
BH72 Lite
)
Teams 版本：
配对与设备连接
无蓝牙设备
开机状态
出厂预配对，
自动连接
内置蓝牙设备
Teams/UC 版本：
如果您需要进行 RMA 替换货服务，您可以到 https://ticket.yealink.
com/page/headset/warranty-service.html 提交硬件问题，我们的技
术支持团队会尽快为您受理。
Product specificaties
| Merk: | Yealink |
| Categorie: | Hoofdtelefoon |
| Model: | BH72 |
Heb je hulp nodig?
Als je hulp nodig hebt met Yealink BH72 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Hoofdtelefoon Yealink
14 April 2025
22 Oktober 2023
3 November 2022
26 Juli 2021
Handleiding Hoofdtelefoon
- BlueParrott
- Auna
- Sprout
- Connect IT
- Hama
- Onkyo
- Denon
- TCL
- Logitech
- MTX
- DAP
- Aftershokz
- Reloop
- Sudio
- Livoo
Nieuwste handleidingen voor Hoofdtelefoon
18 Juni 2025
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025