Yamaha YDS-120 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Yamaha YDS-120 (22 pagina's) in de categorie Muziekinstrument. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/22
YDS-120
DIGITAL SAXOPHONE
Цифровой саксофон
取扱説明書
Owner’s Manual
Benutzerhandbuch
Mode d’emploi
Manual de instrucciones
Manual do Proprietário
Руководство пользователя
사용설명서
JA EN DE FR ES PT RU KO
日本語
EnglishDeutschFrançaisEspañol
Português
한국어 Рycский
4YDS-120 Owner’s Manual
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from
electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited
to, the following:
Do not place the USB cable near heat sources such as heaters or
radiators. Also, do not excessively bend or otherwise damage the
cord, or place heavy objects on it.
Do not touch the product or the power plug during an electrical
storm.
Use only the correct voltage specified for the product. The
required voltage is printed on the name plate of the product.
Use the specified AC adaptor (page 10).
Check the power plug periodically and remove any dirt or dust
which may have accumulated on it.
Insert the power plug firmly all the way into the AC outlet. Using
the product when it is not plugged in sufficiently can cause dust
to accumulate on the plug, possibly resulting in fire or skin
burns.
When setting up the product, make sure that the AC outlet you
are using is easily accessible. If some trouble or malfunction
occurs, immediately turn off the power switch and disconnect the
plug from the outlet. Even when the power switch is turned off, as
long as the power cord is not unplugged from the wall AC outlet,
the product will not be disconnected from the power source.
Do not connect the product to an electrical outlet using a multi-
plug outlet extender. Doing so can result in lower sound quality,
or possibly cause overheating in the outlet.
When disconnecting the power plug, always hold the plug itself
and not the cable. Pulling by the cable can damage it and cause
electric shocks or a fire.
If not using the product for long periods of time, be sure to pull
the power plug from the AC outlet.
This product contains no user-serviceable parts. Do not attempt
to disassemble the internal parts or modify them in any way.
Do not expose the product to rain, use it near water or in damp or
wet conditions, or place on it any containers (such as vases,
bottles or glasses) containing liquids which might spill into any
openings or places where water may drop. A liquid such as water
getting into the product may cause a fire, electric shocks, or
malfunctions.
Never insert or remove an electric plug with wet hands.
Do not place any burning items or open flames near the product,
since they may cause a fire.
Magnetism from this product may affect electro-medical devices,
such as a heart pacemaker implant or defibrillator implant.
- Keep the product away from a heart pacemaker implant or a
defibrillator implant.
Do not dispose of a battery in a fire.
Do not expose the battery to conditions of extreme low air
pressure, cold or heat (such as in direct sunlight or a fire) or
excessive dust or humidity.
Doing so may result in the battery bursting, causing a fire or
injury.
Follow the precautions below. Failure to do so might result in
battery fluid leakage. If the contents of the battery gets on your
hands or in your eyes, it can cause blindness, chemical burns,
and damage of the product.
- Use the specified battery type (page 15) only.
- Do not use new batteries together with old ones.
- Do not mix battery types.
- Always make sure all batteries are inserted in conformity with
the +/- polarity markings.
- Do not disassemble a battery.
- When the batteries run out, or if the product is not to be used
for a long time, remove the batteries from the product.
- Do not attempt to recharge batteries that are not designed to
be charged.
If the batteries do leak, avoid contact with the leaked fluid. If the
battery fluid should come in contact with your eyes, mouth, or
skin, wash immediately with water and consult a doctor. Battery
fluid is corrosive and may possibly cause loss of sight or
chemical burns.
PRECAUTIONS
Power
Do not open
Water warning
Fire warning
Influences on electro-medical devices
Battery
DMI-10 1/2
5
YDS-120 Owner’s Manual
Never charge when the product is wet. Doing so may cause
electric shock, fire, or malfunction due to short circuiting.
When using rechargeable batteries, follow the instructions that
came with the batteries. Use only the specified charger device
and within the specified charging temperature range when
charging.
Charging with an unspecified charger or at a temperature outside
the range may cause leakage, overheating, explosion, or
malfunction.
Keep batteries away from children. A child could accidentally
swallow a battery. Failure to observe this may also cause
inflammation due to battery fluid leaks.
Do not put batteries in a pocket or bag, or carry or store them
together with pieces of metal. Batteries kept in such condition
could short, burst, or leak, causing a fire or injury.
If any of the following problems occur, immediately turn off the
power switch and remove all connected cables. If you are using
batteries, remove all batteries from the product.
Finally have the device inspected by Yamaha service personnel.
- The USB cable or plug becomes frayed or damaged.
- Unusual smells or smoke are emitted.
- Some object, or water has been dropped into the product.
- There is a sudden loss of sound during use of the product.
- Cracks or other visible damage appear on the product.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or
damage to the instrument or other property. These precautions include, but are not limited to, the following:
Do not place the product in an unstable position or a location
with excessive vibration, where it might accidentally fall over and
cause injury.
Before moving the instrument, remove all connected cables, to
prevent damage to the cables or injury to anyone who might trip
over them.
Before connecting the product to other electronic components,
turn off the power for all components. Before turning the power
on or off for all components, set all volume levels to minimum.
Be sure to set the volumes of all components at their minimum
levels and gradually raise the volume controls while playing the
instrument to set the desired listening level.
Do not insert a finger or hand in any gaps on the product.
Do not insert foreign materials such as metal or paper into any
openings or gaps of the product. Failure to observe this may
cause a fire, electric shocks, or malfunctions.
Do not rest your weight on, or place heavy objects on the
product, and do not use excessive force on the buttons, switches
or connectors.
Keep small parts out of the reach of infants. Your children may
accidentally swallow them.
Do not use the product or headphones for a long period of time
at a high or uncomfortable volume level, since this can cause
permanent hearing loss. If you experience any hearing loss or
ringing in the ears, consult a physician.
When using a strap, make sure the strap is securely attached to
the instrument.
Do not lift the instrument by the strap. It can cause serious injury
or damage to the instrument.
Do not treat the instrument in a rough manner such as swinging
it about, etc. The strap on the instrument may detach causing
unexpected accidents such as the instrument dropping, etc., or
injuring persons close by.
Remove the power plug from the AC outlet before cleaning the
unit. Failure to observe this may cause electric shocks.
Always turn the power off when the instrument is not in use.
Even when the [ ] (Standby/On) switch is in standby status (power lamp is off), electricity is still flowing to the instrument at the minimum level.
When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.
Make sure to discard used batteries according to local regulations.
If you notice any abnormality
Location
Connections
Handling
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
DMI-10 2/2


Product specificaties

Merk: Yamaha
Categorie: Muziekinstrument
Model: YDS-120

Heb je hulp nodig?

Als je hulp nodig hebt met Yamaha YDS-120 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden