Yamaha PianoCraft E-410 Handleiding

Yamaha Hifi systeem PianoCraft E-410

Lees hieronder de đź“– handleiding in het Nederlandse voor Yamaha PianoCraft E-410 (45 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 65 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/45
ii
1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install this unit (RX-E410 and CDX-E410) in a well ventilated,
cool, dry, clean place with at least 10 cm on the top (except for
CDX-E410), 10 cm on the left and right, and 10 cm at the back of
this unit — away from direct sunlight, heat sources, vibration,
dust, moisture, and/or cold.
3 Locate this unit away from other electrical appliances, motors, or
transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature changes from cold
to hot, and do not locate this unit in an environment with high
humidity (i.e. a room with a humidifier) to prevent condensation
inside this unit, which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
5 Avoid installing this unit where foreign object may fall onto this
unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
– Other components, as they may cause damage and/or
discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause fire, damage
to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall and liquid
may cause electrical shock to the user and/or damage to this
unit.
6 Do not cover this unit with a newspaper, tablecloth, curtain, etc.
in order not to obstruct heat radiation. If the temperature inside
this unit rises, it may cause fire, damage to this unit, and/or
personal injury.
7 Do not plug in this unit to a wall outlet until all connections are
complete.
8 Do not operate this unit upside-down. It may overheat, possibly
causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cable from the wall outlet, grasp
the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents; this might damage
the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used. Using this unit
with a higher voltage than specified is dangerous and may cause
fire, damage to this unit, and/or personal injury. YAMAHA will
not be held responsible for any damage resulting from use of this
unit with a voltage other than specified.
13 Do not attempt to modify or fix this unit. Contact qualified
YAMAHA service personnel when any service is needed.
The cabinet should never be opened for any reasons.
14 When not planning to use this unit for long periods of time (i.e.
vacation), disconnect the AC power plug from the wall outlet.
15 Be sure to read the “Troubleshooting” section on common
operating errors before concluding that this unit is faulty.
16 Before moving this unit, press STANDBY/ON to set this unit in
standby mode, and disconnect the AC power plug from the wall
outlet.
17 Condensation will form when the surrounding temperature
changes suddenly. Disconnect the power cable from the outlet,
then leave the unit alone.
18 When using the unit for a long time, the unit may become warm.
Turn the power off, then leave the unit alone for cooling.
19 Install this unit near the wall outlet and where the AC power plug
can be reached easily.
DANGER
When this unit is plugged to the wall outlet, do not place your
eyes close to the opening of the disc tray and other openings to
look into inside.
â–  For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the instructions
described below.
The plug severed from the mains lead must be destroyed, as a
plug with bared flexible cord is hazardous if engaged in a live
socket outlet.
â–  Special Instructions for U.K. Model
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
This unit is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this unit itself
is turned off. This state is called the standby mode. In this
state, this unit is designed to consume a very small quantity of
power.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
The laser component in this product is capable of emitting
radiation exceeding the limit for Class 1.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
Note
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this appa-
ratus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to
the terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L
or coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
1 En
EnglishPREPARATIONINTRODUCTION
TUNER
OPERATIONS
OTHER
OPERATIONS
ADDITIONAL
INFORMATION
BASIC
OPERATIONS
Features .................................................................. 2
Supplied Accessories ............................................. 2
Controls and Functions......................................... 3
Receiver (RX-E410) .................................................. 3
CD player (CDX-E410)............................................. 6
Remote control........................................................... 8
Connecting the System ........................................ 12
Connecting Antennas .......................................... 14
Connecting the AM loop antenna............................ 14
Connecting the FM antenna..................................... 14
Connecting External Components ..................... 15
Connecting an MD player or a tape deck ................ 15
Connecting an MD recorder or a CD recorder ........ 15
Connecting a YAMAHA iPod universal dock ........ 16
Connecting the Power Cables............................. 17
Adjusting the Clock............................................. 18
Basic Receiver Operations.................................. 19
Changing the front panel display settings................ 20
Basic Disc Playback Operations......................... 21
Switching the playback information display ........... 22
Repeating playback
(Repeat Play) ....................................................... 24
Playing back randomly
(Random Play)..................................................... 24
Customizing playback order (Program Play) .......... 25
FM/AM Tuning.................................................... 26
Automatic tuning ..................................................... 26
Manual tuning.......................................................... 26
Automatic preset tuning........................................... 27
Manual preset tuning ............................................... 27
Selecting preset stations........................................... 28
Radio Data System Tuning (U.K. and Europe
Models Only) .................................................... 29
Selecting the Radio Data System program .............. 29
Displaying the Radio Data System information ...... 30
Setting the Timer.................................................. 32
Setting the clock timer ............................................. 32
Setting the sleep timer ............................................. 33
Setting the auto-standby mode............................ 34
Controlling iPod ................................................... 35
Available iPod operations........................................ 35
Using iPod ............................................................... 36
Troubleshooting.................................................... 38
Receiver (RX-E410) ................................................ 38
CD player (CDX-E410)........................................... 41
Remote control ........................................................ 41
Notes on Discs ....................................................... 42
Disc information ...................................................... 42
Handling a disc ........................................................ 42
Glossary................................................................. 43
Audio information ................................................... 43
Copyright and logo marks ....................................... 43
Specifications ........................................................ 44
Contents
INTRODUCTION
PREPARATION
BASIC OPERATIONS
TUNER OPERATIONS
OTHER OPERATIONS
ADDITIONAL INFORMATION
FEATURES
2 En
Receiver (RX-E410)
• Maximum RMS output power per channel
65W + 65W (1% THD, 1 kHz, 6Ω)
• 40-station FM/AM preset tuning
• iPod dock terminal
• Pure Direct mode
CD player (CDX-E410)
• Plays Audio CDs, MP3 CDs, and WMA CDs.
• CD Text data display
• Optical and coaxial digital output jacks
â–  About this manual
• In this manual, “RX-E410” is described as “receiver” and “CDX-E410” is described as “CD player”.
• This manual describes how to operate the system using a remote control except when it is not available. Some of these operations are
also available using the front panel buttons.
• y indicates a tip for your operation.
• Notes contain important information about safety and operating instructions.
• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In
case of differences between the manual and the product, the product has priority.
This product includes the following accessories. Before connecting this system, make sure you received all of the following parts.
Features
Supplied Accessories
STANDBY/ON
1 2 3 4
5 6
9 0
7 8
DIMMER
REPEATPROG
FREQ/T EXT
TI ME/INFO
PT Y SEEK
MODE ST ART
RANDOM
MENU
FOLDER/PRESET
ENTER
FILE
/A-E
FILE
/A-E
DISPLAY
SLEEP
CD TUNER BAND
TAPE/MD AUX/TV DOCK
INPUT VOLUME
Indoor FM antenna
System control
cable (0.6 m)
AM loop antenna
Batteries (x2)
(AA, R06, UM-3)
Remote
control
Audio pin
cable (1.5 m)


Product specificaties

Merk: Yamaha
Categorie: Hifi systeem
Model: PianoCraft E-410
Kleur van het product: Zwart
Soort: Home audio-microsysteem
Gemiddeld vermogen: 130 W
Aantal luidsprekers: 2
Volumeregeling: Draaiknop
Impedantie: 6 Ohm
Frequentiebereik: 55 - 28000 Hz
Signaal/ruis-verhouding: 105 dB
MP3 afspelen: Ja
Ondersteunde mediatypen: MP3, WMA
Optische drive type: CD,CD-R,CD-RW
Ondersteunde frequentiebanden: AM,FM
Aantal voorkeurszenders: 40
Optical disc player: Ja
Aantal optische schijven: 1 schijven
Inclusief RDS tuner: Ja
Totale harmonische vervorming (THD): 0.003 procent
Diameter woofer: 130 mm
Diameter hogetonenluidspreker: 25 mm
CD-R afspelen: Ja
CD-RW afspelen: Ja
Diepte van de hoofd luidspreker: 223 mm
Hoogte van de hoofd luidspeker: 300 mm
Breedte van de hoofd luidspreker: 186 mm
Afstandsbediening inbegrepen: Ja
Regeling van bass-niveau: Ja
Treble adjustment: Ja
CD Text: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Yamaha PianoCraft E-410 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hifi systeem Yamaha

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem