Yamaha EAD50 Handleiding

Bekijk gratis de handleiding van Yamaha EAD50 (2 pagina’s), behorend tot de categorie Muziekinstrument. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.0 sterren uit 2 reviews. Heb je een vraag over Yamaha EAD50 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

About EAD50

Thank you for purchasing this Yamaha product, Electric Acoustic Drum Module EAD50.

The EAD50 is a product that captures the entire drum kit by one drum sensor unit, allowing you to create authentic

drum sounds by mixing effects settings or volume adjustments to both the sound of acoustic drum performance

input from the microphone and the electronic drum sound produced by the signal input from the trigger jack while

performing.

To get the most out of your EAD50, be sure to read this Owner’s Manual carefully. And after reading through this

manual, be sure to store it in a safe place so that you can refer back to it again as needed.



About the manuals

Included manual

Quick Guide (This manual) : Explains how to attach and setup the EAD50 for producing sound, and function of

each part.

Digital Manual (PDF)

User Guide : Explains all the functions of EAD50.

Data List :This provides lists of Scene and Effect names in the EAD50, and MIDI related information.

Smart Device Connection Manual : Describes how to connect smartphones and tablets.

The digital format manuals listed above can be obtained from the Yamaha Downloads web page.

To do so, go to the web page using the following URL, enter “EAD50” in the “Model Name” field, and then click “Search.”

Yamaha Downloads: https://download.yamaha.com/



About related Apps

https://jp.yamaha.com/products/apps/index.html

EAD Touch

EAD Touch is an app designed to be used in combination with EAD50. It allows you to intuitively operate the

various features of EAD50, such as voice editing, microphone and trigger settings, and input/output routing,

thorough a graphical interface. It provides powerful support for drummers to use EAD50 in live performances,

recording sessions, and streaming.

Rec’n’Share

With Rec’n’Share, you can easily play, record, film, edit, and upload your favorite songs. It powerfully supports

your practice, recording, and performance activities.



Included Accessories

Depending on the country in which you purchased the product, AC adaptor may not be included.



EAD50 Quick Gude

(This manual) ×1



AC adaptor ×1



Module holder ×1



Module holder wing

bolts ×4



Standrd stereo phone cable (4 m) ×1

(hereinafter referred to as a phone cable)



3-pin XLR cable (3.1 m) ×2



Cable bands ×3



Cubase AI download information ×1



Safety guide ×1

DSU50



DSU50 ×1



DSU50 Owner’s Manual ×1



Stereo 5-pin XLR microphone cable

(1.4 m, with cable band) ×1

(hereinafter referred to as a stereo XLR cable)



Adhesive cushions ×2

Connection Guide



Connecting the AC adaptor

1

Connect the adaptor.

WARNING

• Make sure to use only the included AC

adaptor.

2

Wrap the AC adaptor’s cord

around the cord hook to secure

it in place.

3

Plug the AC adaptor’s AC plug into a domestic power

outlet.

Cord hook



Installing the Main Unit

Either place the Main Unit on a table, or mount on the stand

using the included module holder.

NOTE

• The module holder has a diameter of 22.2 mm (7/8”).

Main Unit

Module holder

Module holder wing bolt

22.2 mm (7/8”)



Connecting the Cables

CAUTION

• Do not connect or disconnect cables while the power is on.

1

Connect the 5-pin plug of the included stereo XLR cable to

the MIC jack

q

on the Sensor Unit.

2

Connect the 3-pin [CH1 (white)] plug to the MIC 1 jack

w

on the rear of the EAD50, and connect the [CH2 (red)] plug

to the MIC 2 jack

e

.

NOTE

• If the distance to the main unit is too long, extend the cable

using the included 3-pin XLR cable to enable connection.

3

Connect the included phone cable to the TRIGGER jack

r

on the DSU50, and connect the other end to the TRIGGER

INPUT jack

t

on the EAD50.

Sensor Unit

q

5-pin plug

3 pin plug

[CH1 (white)]

r

we

t

3 pin plug

[CH2 (red)]



Securing the Cables

Secure the connector cables close to the Sensor Unit using

the cable band wrapped around the Stereo XLR cable.



Connecting a Portable Music Player

Connect your smartphone or portable music player to the [USB

TO HOST] terminal (USB Type-C™) on the rear or the [AUX IN]

jack on the front.

NOTE

• For connection using the [USB TO HOST] terminal, please refer to

the Smart Device Connection Manual.

• The Bluetooth connection is described on the back of this sheet.



Attaching the Sensor Unit (DSU50)

Attach the Sensor Unit to the top of the batter side of the

bass drum hoop.

NOTICE

• Make sure the Sensor Unit or plugs do not touch any of the

toms or other instruments.

NOTE

• For detailed installation instructions, refer to the included DSU50

Owner’s Manual.



Connecting Headphones

Connect the headphones to the [PHONES] jack.

NOTICE

• Two jack types are available. Use the appropriate jack according to

the plug shape of your headphones. If both jacks are used at the

same time, the output of each jack may be reduced.

NOTE

• To make EAD sounds easier to hear, we recommend using in-ear

monitors or closed-back headphones that block external noise.

When external sounds (such as acoustic drum sounds) are mixed

in, the sound may not be the same as intended.

• If your headphones have low sound isolation, the volume may feel

low. If you feel the volume is insufficient, adjust the parameters on

the following screen.

[MENU]

g

Output

g

Output Gain

g

Phones Out



Connecting to a PA System

Connect the [OUTPUT-BALANCED] jacks or [OUTPUT-

UNBALANCED] jacks to the PA system.

NOTICE

• Whenever connecting other devices, make sure that plugs on the

cables you are using match the jacks on each device.

PA system

or

PHONES

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

Power supply

•Do not place the power cord near heat sources such as heaters or radiators.

Also, do not excessively bend or otherwise damage the cord, or place heavy

objects on it.

•Do not touch the product or the power plug during an electrical storm.

•Use only the correct voltage specified for the product. The required voltage

is printed on the name plate of the product.

•Use only the supplied AC adaptor, power cord.

•Do not use the supplied AC adaptor for other devices.

•Check the power plug periodically and remove any dirt or dust which may

have accumulated on it.

•Insert the power plug firmly all the way into the AC outlet. Using the product

when it is not plugged in sufficiently can cause dust to accumulate on the

plug, possibly resulting in fire or skin burns.

•

When setting up the product, make sure that the AC outlet you are using is

easily accessible. If some trouble or malfunction occurs, immediately turn

off the power switch and disconnect the plug from the outlet. Even when the

power switch is turned off, as long as the power cord is not unplugged from

the wall AC outlet, the product will not be disconnected from the power source.

•Do not connect the product to an electrical outlet using a multi-plug outlet

extender. Doing so can result in lower sound quality, or possibly cause fire

at or around the outlet.

•When disconnecting the power plug, always hold the plug itself and not the

cord. Pulling by the cord can damage it and cause electric shock or fire.

•If not using the product for long periods of time, be sure to pull the power

plug from the AC outlet.

Do not disassemble

•This product contains no user-serviceable parts. Do not attempt to

disassemble the internal parts or modify them in any way.

Water warning

•

Do not expose the product to rain, use it near water or in damp or wet conditions,

or place on it any containers (such as vases, bottles or glasses) containing liquids

which might spill into any openings or places where water may drop. A liquid such

as water getting into the product may cause fire, electric shock, or malfunctions.

•Use the AC adaptor indoors only. Do not use it in any wet environments.

•Never insert or remove a power plug with wet hands.

Fire warning

•Do not place any burning items or open flames near the product, since they

may cause fire.

Wireless unit

•Radio waves from this product may affect electro-medical devices, such as

a heart pacemaker implant or defibrillator implant.

–Do not use the product near medical devices or inside medical facilities.

Radio waves from this product may affect electro-medical devices.

–Do not use the product within 15 cm (6 in.) of persons with a heart

pacemaker implant or a defibrillator implant.

Connections

•Be sure to read the manual of the device to be connected, and follow the

instructions. Failure to observe this may cause fire, overheating, rupture,

or malfunction.

If you notice any abnormality

•If any of the following problems occur, immediately turn off the power

switch and disconnect the power plug from the outlet. Finally have the

device inspected by Yamaha service personnel.

–The power cord or plug becomes frayed or damaged.

–Unusual smells or smoke are emitted.

–Some object, or water has been dropped into the product.

–There is a sudden loss of sound during use of the product.

–Cracks or other visible damage appear on the product.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the product or other property. These precautions include, but are not limited to, the following:

Assemble

•

Assemble the instrument in the proper sequence by following the assembly

instructions in this manual. Also, make sure to tighten the screws or bolts

regularly. Failure to do so might result in damage to the instrument or even injury.

Location

•Do not place the product in an unstable position or a location with excessive

vibration, where it might accidentally fall over, resulting in malfunction and

even injury.

•Before moving the product, remove all connected cables, to prevent damage

to the cables or injury to anyone who might trip over them.

•Use only the stand specified for the product. When attaching it, use the

included screws only. Failure to do so could result in the product falling

over, causing damage to the product or injury.

Connections

•Before connecting the product to other devices, turn off the power for all

devices. Before turning the power on or off for all devices, set all volume

levels to minimum.

•Be sure to set the volumes of all devices at their minimum levels and

gradually raise the volume controls while playing the product to set the

desired listening level.

Handling

•Do not insert foreign materials such as metal or paper into any openings or

gaps of the product. Failure to observe this may cause fire, electric shock,

or malfunctions.

•Do not rest your weight on, or place heavy objects on the product, and do

not use excessive force on the buttons, switches or connectors.

•Keep small parts out of the reach of children, since they may accidentally

swallow them.

•Keep this product out of reach of children. This product is not suitable for

use in locations where children are likely to be present.

•Do not use the product or headphones for a long period of time at a high or

uncomfortable volume level, since this can cause permanent hearing loss. If

you experience any hearing loss or ringing in the ears, consult a physician.

•Remove the power plug from the AC outlet before cleaning the unit. Failure

to observe this may cause electric shock.

NOTICE

To avoid the possibility of malfunction/ damage to the

product, damage to data, or damage to other property,

follow the notices below.

■

Handling

•Do not use the instrument in the vicinity of a TV, radio, stereo equipment,

mobile phone, or other electric devices. Otherwise, the instrument, TV,

or radio may generate noise. When you use the instrument along with

an application on your smart device such as a smartphone or tablet, we

recommend that you set Wi-Fi to on after setting “Airplane Mode” to on the

device to avoid noise caused by communication.

•Use a USB cable of less than 3 meters.

•Do not expose the product to excessive dust or vibrations, or extreme

cold or heat (such as in direct sunlight, near a heater, or in a car during

the day) to prevent the possibility of disfiguration, damage to the internal

components or unstable operation.

•Do not place vinyl, plastic or rubber objects on the product, since this might

discolor the product.

•Always turn the power off when the product is not in use.

•Even when the [] (On) switch is in standby status (display is off),

electricity is still flowing to the product at the minimum level. When you are

not using the product for a long time, make sure you unplug the power cord

from the wall AC outlet.

■

Maintenance

•When cleaning the product, use a soft and dry (or slightly damp) cloth.

Do not use paint thinners, solvents, alcohol, cleaning fluids, or chemical-

impregnated wiping cloths.

■

Saving data

•System settings are stored automatically and will not be lost when the

power is turned off. However, settings may be lost due to malfunction or

improper operation. Save important data to an external device such as a

USB flash drive, SD card, or a computer.

Information

■

About copyrights

•The copyright of the “content”*

1

installed in this product belongs to

Yamaha Corporation or its copyright holder. Except as permitted by

copyright laws and other relevant laws, such as copying for personal use,

it is prohibited to “reproduce or divert”*

2

without the permission of the

copyright holder. When using the content, consult with a copyright expert.

•If you create music or perform with the contents through the original use of

the product, and then record and distribute them, the permission of Yamaha

Corporation is not required regardless of whether the distribution method is

paid or free of charge.

*1: The word “content” includes a computer program, audio data,

Accompaniment Style data, MIDI data, waveform data, voice recording

data, music score, and score data, etc.

*2: The phrase “reproduce or divert” includes taking out the content itself

in this product, or recording and distributing it without changes in a

similar manner.

■

About this manual

•The illustrations and LCD screens as shown in this manual are for

instructional purposes only.

•Windows is a registered trademark of Microsoft® Corporation in the United

States and other countries.

•MacOS, iPhone and iPad are trademarks of Apple Inc., registered in the U.S.

and other countries.

•The Bluetooth® word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is

under license.

•

USB Type-C ™ and USB-C ™ are registered trademarks of USB Implementers

Forum.

•The company names and product names in this manual are the trademarks

or registered trademarks of their respective companies.

■

About disposal

•

When disposing of this product, please contact the appropriate local

authorities.

Yamaha cannot be held responsible for damage caused by improper

use or modifications to the product, or data that is lost or destroyed.

Cable band

This transmitter must not be co-located or operated in conjunction with

any other antenna or transmitter.

(502-M01 UL 60065-1 en 01)

This equipment complies with FCC radiation exposure limits set forth

for an uncontrolled environment and meets the FCC radio frequency

(RF) Exposure Guidelines. This equipment should be installed and

operated keeping the radiator at least 20cm or more away from

person’s body.

(554-M03 FCC mobile SAR 01)

This equipment complies with ISED radiation exposure limits set forth

for an uncontrolled environment and meets RSS-102 of the ISED radio

frequency (RF) Exposure rules. This equipment should be installed

and operated keeping the radiator at least 20cm or more away from

person’s body.

(555-M04 ISED mobile SAR 01)

This device contains licence-exempt transmitter(s)/receiver(s) that

comply with Innovation, Science and Economic Development Canada’s

licence-exempt RSS(s). Operation is subject to the following two

conditions:

1.This device may not cause interference.

2.This device must accept any interference, including interference that

may cause undesired operation of the device.

(555-M13 ISED RSS 01)

The model number, serial number, power requirements, etc.,

may be found on or near the name plate, which is at the bottom

of the unit. You should note this serial number in the space

provided below and retain this manual as a permanent record

of your purchase to aid identification in the event of theft.

Model No.

Serial No.

(1003-M06 plate bottom en 01)

LIMITED WARRANTY FOR CUSTOMERS

IN THE UNITED STATES

For a copy of your YAMAHA® Limited Warranty, please visit the

website identified below. For assistance, additional product

information, or to request a copy of your warranty, you may also

visit and complete the Customer Service & Support form at

www.usa.yamaha.com/support/contacts/form.html,

or contact Customer Service & Support at the below address

or telephone number.

Website

www.usa.yamaha.com/support/warranty/drums/

Customer Service & Support

Yamaha Corporation of America

Attn: Customer Service

6600 Orangethorpe Avenue, Buena Park,

California 90620

Telephone: 800-854-1569

DC IN jack

The shape of the plug and outlet

differs depending on your area.

Power cord

AC adaptor

AC Outlet

XLR cable

Phone cable

ELECTRONIC ACOUSTIC DRUM MODULE

Quick Guide

© 2026 Yamaha Corporation

IPES-A0

Published 01/2026

VHS7040

Product specificaties