Yamaha DT50S Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Yamaha DT50S (30 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 78 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/30
1
Drum Trigger Module
Setup Manual for DT50S/DT50K
This manual describes how to correctly connect drum triggers (DT50S/DT50K) to your drum trig-
ger module and set parameters on your module to use the triggers. Refer to the Owner’s Manual
that came with your DT50S/DT50K for details on how to use drum triggers and mount them on
acoustic drums.
Select your drum trigger module.
DTX502 DTX700Page2 Page12
DTX900M/DTX900/DTXTREME III
Page17 DTX-MULTI 12 Page24
EN
2
DTX502
Depending on the version of the firmware, you may need to update it. Before you connect the module
to your DT50S/DT50K triggers, be sure to check the version of your module’s firmware.
1. While holding down the [SHIFT] button, turn on the drum trigger module.
2. Confirm the version displayed on-screen.
After you confirm the version, select the appropriate setup method.
If Version 1.30 or later Quick Setup (recommended)
Advanced Setup
If Version less than 1.30 Update before Using (recommended)
Use without Updating
Checking the Firmware Version
Selecting a Setup Method
Quick Setup (recommended)
3
DTX502
This section describes the basic setup for connecting your DT50S/DT50K triggers to your module,
and how to automatically set parameters by using Trigger Setup. With this method, you do not need
to select voices individually. You can play snare, tom, or kick drum sounds simply by selecting a Pre-
set kit.
1. Connecting to the Drum Trigger Module
Connect your drum triggers to the jacks on your DTX502 indicated below by using the stereo audio cables that came with the
triggers. Refer to the Owner’s Manual that came with your DT50S/DT50K for details on how to use the drum triggers and
mount them on acoustic drums.
NOTE
• The following jacks on the DTX502 each comprise a pair of mono inputs (L: trigger, R: trigger): [wTOM1/!0], [eTOM2/!1], [rTOM3/!2], and
[ KICK/ ]u i . In this basic setup, the snare drum (DT50S) is connected to the [u iKICK/ ] jack and the bass drum (DT50K) to the [qSNARE]
jack in order to produce two sounds on the snare drum, one for a head shot and one for a rim shot. Note that in this case the connected drums
will not match the jack names.
• If you wish to produce a sound for tom rim shots as well, refer to Advanced Setup.
Quick Setup (recommended)
To m1
(DT50S)
To m2 (DT50S)
Floor tom (DT50S)
Snare drum
(DT50S)
Bass drum (DT50K)
stereo audio cables that
came with DT50S/DT50K
Basic Setup


Product specificaties

Merk: Yamaha
Categorie: Niet gecategoriseerd
Model: DT50S

Heb je hulp nodig?

Als je hulp nodig hebt met Yamaha DT50S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Yamaha

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd