Yamaha Clavinova CLP-860 Handleiding
Lees hieronder de đ handleiding in het Nederlandse voor Yamaha Clavinova CLP-860 (72 pagina's) in de categorie Piano. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/72
R
IMPORTANT
Check your power supply
Make sure that your local AC mains voltage matches the volt-
age speciďŹed on the name plate on the bottom panel. In some
areas a voltage selector may be provided on the bottom panel
of the main keyboard unit near the power cord. Make sure that
the voltage selector is set for the voltage in your area. The
voltage selector is set at 240V when the unit is initially
shipped. To change the setting use a âminusâ screwdriver to
rotate the selector dial so that the correct voltage appears next
to the pointer on the panel.
92-469 1
Battery Notice: This product MAY contain a small non-
rechargable battery which (if applicable) is soldered in
place. The average life span of this type of battery is ap-
proximately five years. When replacement becomes nec-
essary, contact a qualified service representative to per-
form the replacement.
Warning: Do not attempt to recharge, disassemble, or
incinerate this type of battery. Keep all batteries away
from children. Dispose of used batteries promptly and as
regulated by applicable laws. Note: In some areas, the
servicer is required by law to return the defective parts.
However, you do have the option of having the servicer
dispose of these parts for you.
Disposal Notice: Should this product become damaged
beyond repair, or for some reason its useful life is consid-
ered to be at an end, please observe all local, state, and
federal regulations that relate to the disposal of products
that contain lead, batteries, plastics, etc.
NOTICE: Service charges incurred due to lack of knowl-
edge relating to how a function or effect works (when the
unit is operating as designed) are not covered by the
manufacturerâs warranty, and are therefore the owners
responsibility. Please study this manual carefully and con-
sult your dealer before requesting service.
NAME PLATE LOCATION: The graphic below indi-
cates the location of the name plate. The model number,
serial number, power requirements, etc., are located on
this plate. You should record the model number, serial
number, and the date of purchase in the spaces provided
below and retain this manual as a permanent record of
your purchase.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
PRODUCT SAFETY MARKINGS: Yamaha electronic
products may have either labels similar to the graphics
shown below or molded/stamped facsimiles of these
graphics on the enclosure. The explanation of these graph-
ics appears on this page. Please observe all cautions indi-
cated on this page and those indicated in the safety in-
struction section.
See bottom of Keyboard enclosure for graphic symbol markings
The exclamation point within the equi-
lateral triangle is intended to alert the
user to the presence of important oper-
ating and maintenance (servicing) in-
structions in the literature accompany-
ing the product.
The lightning flash with arrowhead
symbol, within the equilateral triangle,
is intended to alert the user to the pres-
ence of uninsulated âdangerous volt-
ageâ within the productâs enclosure that
may be of sufficient magnitude to con-
stitute a risk of electrical shock.
IMPORTANT NOTICE: All Yamaha electronic prod-
ucts are tested and approved by an independent safety
testing laboratory in order that you may be sure that when
it is properly installed and used in its normal and custom-
ary manner, all foreseeable risks have been eliminated.
DO NOT modify this unit or commission others to do so
unless specifically authorized by Yamaha. Product per-
formance and/or safety standards may be diminished.
Claims filed under the expressed warranty may be denied
if the unit is/has been modified. Implied warranties may
also be affected.
SPECIFICATIONS SUBJECT TO CHANGE: The
information contained in this manual is believed to be
correct at the time of printing. However, Yamaha reserves
the right to change or modify any of the specifications
without notice or obligation to update existing units.
ENVIRONMENTAL ISSUES: Yamaha strives to pro-
duce products that are both user safe and environmentally
friendly. We sincerely believe that our products and the
production methods used to produce them, meet these
goals. In keeping with both the letter and the spirit of the
law, we want you to be aware of the following:
SPECIAL MESSAGE SECTION
CLP-880/880M/880PE
Model _____________________________________
Serial No. __________________________________
Purchase Date ______________________________
CLP-860/860M
CLP-840
CLP-820
CLP-820S
3
CLP-880/860/840/820/820S
⢠(For instruments with a key cover) Take care that the key cover does not
pinch your fingers, and do not insert a finger or hand in the key cover gap.
⢠(For instruments with a key cover) Never insert or drop paper or metallic or
other objects between the slits of the key cover and the keyboard. If this
happens, immediately turn off the power and remove the electric plug from
the outlet and have the instrument inspected by qualified Yamaha service
personnel.
⢠Do not place the instrument against a wall (allow at least 3 cm/one-inch
from the wall), since this can cause inadequate air circulation, and possi-
bly result in the instrument overheating.
⢠Read carefully the attached documentation explaining the assembly pro-
cess. Failure to assemble the instrument in the proper sequence might
result in damage to the instrument or even injury.
⢠Do not operate the instrument for a long period of time at a high or un-
comfortable volume level, since this can cause permanent hearing loss. If
you experience any hearing loss or ringing in the ears, consult a physi-
cian.
â USING THE BENCH (if included)
⢠Do not play carelessly with or stand on the bench. Using it as a tool or
step-ladder or for any other purpose might result in accident or injury.
⢠Only one person should sit on the bench at a time, in order to prevent the
possibility of accident or injury.
⢠(For height-adjustable benches) Do not attempt to adjust the bench height
while sitting on the bench, since this can cause excessive force to be im-
posed on the adjustment mechanism, possibly resulting in damage to the
mechanism or even injury.
⢠If the bench screws become loose due to extensive long-term use, tighten
them periodically using the included tool.
â SAVING USER DATA
⢠Save all data to an external device such as the Yamaha MIDI Data Filer MDF3,
in order to help prevent the loss of important data due to a malfunction or
user operating error.
Yamaha cannot be held responsible for damage caused by improper use or modi-
fications to the instrument, or data that is lost or destroyed.
Always turn the power off when the instrument is not in use.
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep these precautions in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock,
short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
⢠Do not open the instrument or attempt to disassemble the internal parts or
modify them in any way. The instrument contains no user-serviceable parts.
If it should appear to be malfunctioning, discontinue use immediately and
have it inspected by qualified Yamaha service personnel.
⢠Do not expose the instrument to rain, use it near water or in damp or wet
conditions, or place containers on it containing liquids which might spill
into any openings.
⢠If the power cord or plug becomes frayed or damaged, or if there is a sudden
loss of sound during use of the instrument, or if any unusual smells or
smoke should appear to be caused by it, immediately turn off the power
switch, disconnect the electric plug from the outlet, and have the instrument
inspected by qualified Yamaha service personnel.
⢠Only use the voltage specified as correct for the instrument. The required
voltage is printed on the name plate of the instrument.
⢠Before cleaning the instrument, always remove the electric plug from the
outlet. Never insert or remove an electric plug with wet hands.
⢠Check the electric plug periodically and remove any dirt or dust which may
have accumulated on it.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the
instrument or other property. These precautions include, but are not limited to, the following:
⢠Do not place the power cord near heat sources such as heaters or radiators,
and do not excessively bend or otherwise damage the cord, place heavy
objects on it, or place it in a position where anyone could walk on, trip over,
or roll anything over it.
⢠When removing the electric plug from the instrument or an outlet, always
hold the plug itself and not the cord. Pulling by the cord can damage it.
⢠Do not connect the instrument to an electrical outlet using a multiple-con-
nector. Doing so can result in lower sound quality, or possibly cause over-
heating in the outlet.
⢠Remove the electric plug from the outlet when the instrument is not to be
used for extended periods of time, or during electrical storms.
â˘
Before connecting the instrument to other electronic components, turn off the
power for all components. Before turning the power on or off for all compo-
nents, set all volume levels to minimum. Also, be sure to set the volumes of
all components at their minimum levels and gradually raise the volume con-
trols while playing the instrument to set the desired listening level.
⢠Do not expose the instrument to excessive dust or vibrations, or extreme
cold or heat (such as in direct sunlight, near a heater, or in a car during the
day) to prevent the possibility of panel disfiguration or damage to the inter-
nal components.
⢠Do not use the instrument near other electrical products such as televisions,
radios, or speakers, since this might cause interference which can affect
proper operation of the other products.
⢠Do not place the instrument in an unstable position where it might acciden-
tally fall over.
⢠Before moving the instrument, remove all connected cables.
⢠When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners,
solvents, cleaning fluids, or chemical-impregnated wiping cloths. Also, do
not place vinyl, plastic or rubber objects on the instrument, since this might
discolor the panel or keyboard.
â˘
On the CLP-880PE, gently remove dust and dirt with a soft cloth. Do not wipe
too hard since small particles of dirt can scratch the instrumentâs finish.
⢠On the CLP-880PE, bumping the surface of the instrument with metal, porce-
lain, or other hard objects can cause the finish to crack or peel. Use caution.
⢠Do not rest your weight on, or place heavy objects on the instrument, and do
not use excessive force on the buttons, switches or connectors.
(1)B-6vari.
Product specificaties
| Merk: | Yamaha |
| Categorie: | Piano |
| Model: | Clavinova CLP-860 |
Heb je hulp nodig?
Als je hulp nodig hebt met Yamaha Clavinova CLP-860 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Piano Yamaha
25 Juli 2023
19 Juli 2023
18 Juli 2023
17 Juli 2023
17 Juli 2023
17 Juli 2023
17 Juli 2023
17 Juli 2023
17 Juli 2023
17 Juli 2023
Handleiding Piano
- Piano Casio
- Piano Alesis
- Piano Kawai
- Piano Korg
- Piano Max
- Piano Medeli
- Piano Roland
- Piano Technics
- Piano Vox
- Piano Artesia
- Piano NUX
- Piano Orla
- Piano Thomann
- Piano IDance
- Piano Viscount
- Piano Kurzweil
- Piano Dexibell
- Piano Crumar
- Piano Nord
- Piano CLXmusic
Nieuwste handleidingen voor Piano
27 April 2024
27 April 2024
15 April 2024
13 Maart 2024
25 Februari 2024
15 December 2023
15 December 2023
15 December 2023
15 December 2023
15 December 2023