Yale PIR Video Camera Handleiding
Yale
Bewakingscamera
PIR Video Camera
Bekijk gratis de handleiding van Yale PIR Video Camera (2 pagina’s), behorend tot de categorie Bewakingscamera. Deze gids werd als nuttig beoordeeld door 25 mensen en kreeg gemiddeld 4.7 sterren uit 13 reviews. Heb je een vraag over Yale PIR Video Camera of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
Description:
1) Learn/Test Button with LED
hold and release within 3 secs Send test signal:
This is used when checking accessory range
(See Smart Home Alarm user manual).
hold for 10 secs+. Learn Send learn signal:
button LED will flash when learn signal is sent.
2) Camera Flash
3) Camera
4) 3 x AA Lithium batteries
5) Cover tamper switch
Pack contents
• 1 x PIR Video Camera with bracket
• 4 x wall plugs & screws
• 3 x AA Lithium batteries
Program your PIR before installation and test
afterwards. Please see your current Smart Home
Alarm user manual.
SPECIAL NOTE:
When inserting new batteries, the following are
disabled for 5 minutes.
• Tamper Switch
• Video will not be sent in the first 5 minutes
Please make sure you do not trigger the PIR
Video Camera for 5 minutes before testing the
system.
Compatible with Yale Smart Home Alarms
(SR-range) ONLY.
PIR Video Camera
(SR-PVC)
2
3
1
4
5
smart
Living
Programming & Installation
For more information on this product
and Yale Smart Living Range visit
www.yale.co.uk/smart-living
Consumer Support: info@yale.co.uk
2
The 2 year guarantee for this
Yale Smart Home Alarm Kit is
active from the date of purchase
(A copy of this guarantee is
available on our website).
Sleep Timer
The PIR features an automatic “sleep time” of
approximately 1 minute for power conservation.
After transmitting a detected motion, the PIR will
not retransmit for 1 minute. Any further motion
detected within this one-minute sleep period will
extend the sleep time by another minute.
LED indicator
Off Normal operation
LED flash
(2 sec)
When motion is detected and the
LED flashes for 2 seconds, this
indicates one of the following:
• Low battery
• Tamper switch activated
• PIR in test mode
WARNING:
When you delete the PIR Video Camera from
the system, please ensure the PIR batteries are
removed to avoid unnecessary drain.
Environmental conditions:
-10oc to 40oc , relative humidity 85%
non-condensing. Indoor use only
Radio:
2.4GHz
Motion Detection Range:
110o
Note: Waste electrical products and batteries should not be disposed
of with household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
Specification
Operation
Issue No. 1A
Information and illustrations are subject to change.
Yale reserves the right to alter the specification and
product design at any time without notice.
Product specificaties
| Merk: | Yale |
| Categorie: | Bewakingscamera |
| Model: | PIR Video Camera |
Heb je hulp nodig?
Als je hulp nodig hebt met Yale PIR Video Camera stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Bewakingscamera Yale
29 Maart 2025
18 Juni 2023
17 Juni 2023
13 Juni 2023
3 Juni 2023
30 Mei 2023
23 Mei 2023
22 Mei 2023
21 Mei 2023
Handleiding Bewakingscamera
- VideoComm
- Canon
- GVI Security
- Compro
- Genius
- Netgear
- DSC
- Strong
- NetMedia
- HiWatch
- Dahua Technology
- Nest
- Pyle
- Elmo
- Hanwha
Nieuwste handleidingen voor Bewakingscamera
17 Juni 2025
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025