Yale PIR Image Camera Handleiding

Yale Beveiliging PIR Image Camera

Lees hieronder de 📖 handleiding in het Nederlandse voor Yale PIR Image Camera (2 pagina's) in de categorie Beveiliging. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Description:
1) Learn/Test Button with LED
Send test signal: hold and release within 3 secs.
This is used when checking accessory range
(See Smart Home Alarm user manual).
Send learn signal: hold for 10 secs+. Learn
button LED will flash when learn signal is sent.
2) Camera Flash
3) Camera
4) 2 x 1.5V AA Alkaline batteries
5) Cover tamper switch
Pack contents
• 1 x PIR Image Camera with batteries
• 4 x wall plugs & screws
Program your PIR before installation and test
afterwards. Please see your current Smart Home
Alarm user manual.
SPECIAL NOTE:
When inserting new batteries, the following are
disabled for 5 minutes.
• Tamper Switch
• Image will not be sent in the first 5 minutes
Please make sure you do not trigger the PIR
Video Camera for 5 minutes before testing the
system.
Compatible with Yale Smart Home Alarms
(SR-range) ONLY.
PIR Image Camera
(SR-PC)
smart
Living
3
2
1
4
5
Programming & Installation
For more information on this product
and Yale Smart Living Range visit
www.yale.co.uk/smart-living
Consumer Support: info@yale.co.uk
2
The 2 year guarantee for this
Yale Smart Home Alarm Kit is
active from the date of purchase
(A copy of this guarantee is
available on our website).
Sleep Timer
The PIR features an automatic “sleep time” of
approximately 1 minute for power conservation.
After transmitting a detected motion, the PIR will
not retransmit for 1 minute. Any further motion
detected within this one-minute sleep period will
extend the sleep time by another minute.
LED indicator
Off Normal operation
LED flash
(2 sec)
When motion is detected and the
LED flashes for 2 seconds, this
indicates one of the following:
• Low battery
• Tamper switch activated
• PIR in test mode
WARNING:
When you delete the PIR Video Camera from
the system, please ensure the PIR batteries are
removed to avoid unnecessary drain.
Environmental conditions:
-10oc to 40oc , relative humidity 85%
non-condensing. Indoor use only
Radio:
2.4GHz
Motion Detection Range:
110o
Specication
Operation
Note: Waste electrical products and batteries should not be disposed
of with household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
Issue No. 1A
Information and illustrations are subject to change.
Yale reserves the right to alter the specication and
product design at any time without notice.

Product specificaties

Merk: Yale
Categorie: Beveiliging
Model: PIR Image Camera

Heb je hulp nodig?

Als je hulp nodig hebt met Yale PIR Image Camera stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Beveiliging Yale

Yale

Yale SR Series - Smarthome Alarm Handleiding

21 Augustus 2023
Yale

Yale PIR Image Camera Handleiding

21 Augustus 2023
Yale

Yale SR330 Handleiding

21 Augustus 2023

Handleiding Beveiliging

Nieuwste handleidingen voor Beveiliging

Geemarc

Geemarc SOS-PRO 295 Handleiding

6 Maart 2024
One2track

One2track Safety Angel Handleiding

16 Oktober 2023
Sygonix

Sygonix SY-3851632 Handleiding

16 Oktober 2023
Sygonix

Sygonix 1326052 Handleiding

16 Oktober 2023
Sygonix

Sygonix 43588A WLAN Camera Handleiding

16 Oktober 2023
Sygonix

Sygonix 43176S LAN Camera Handleiding

16 Oktober 2023
Sygonix

Sygonix SY-3181234 Handleiding

16 Oktober 2023
Sygonix

Sygonix Touch IP65 Handleiding

16 Oktober 2023
Sygonix

Sygonix 1882082 Handleiding

16 Oktober 2023
Sygonix

Sygonix SY-3822408 Handleiding

16 Oktober 2023