Yaesu FT-2800 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Yaesu FT-2800 (60 pagina's) in de categorie Zendapparatuur. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/60
FM TRANSCEIVER
FT-2800M
OPERATING MANUAL
VERTEX STANDARD CO., LTD.
4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan
VERTEX STANDARD
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
International Division
8350 N.W. 52nd Terrace, Suite 201, Miami, FL 33166, U.S.A.
YAESU EUROPE B.V.
P.O. Box 75525, 1118 ZN Schiphol, The Netherlands
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
VERTEX STANDARD HK LTD.
Unit 5, 20/F., Seaview Centre, 139-141 Hoi Bun Road,
Kwun Tong, Kowloon, Hong Kong
PWR MHz REV LOW D/MR
Contents
Introduction ..................................................... 1
Specifications....................................................2
Accessories & Options .....................................3
Supplied Accessories .....................................3
Optional Accessories .....................................3
Installation ........................................................ 4
Preliminary Inspection ...................................4
Installation Tips .............................................4
Safety Information .........................................5
Antenna Considerations.................................6
Mobile Installation .........................................7
Transceiver Installation .............................7
Mobile Power Connections........................8
Mobile Speakers ........................................8
Base Station Installation ................................9
AC Power Supplies ....................................9
Base Station Feet .......................................9
Front Panel Controls & Switches .................10
Microphone Switches .....................................12
Rear Panel Connectors ..................................13
Basic Operation .............................................. 14
Turning the Transceiver On and Off ............14
Adjusting the Audio Volume Level .............14
Adjusting the Squelch Setting .....................14
Frequency Navigation ..................................14
Tuning Dial .............................................14
Direct Keypad Frequency Entry ..............15
Scanning ..................................................15
Transmission ................................................16
Changing the Transmitter Power Level ...16
Advanced Operation ......................................17
Weather Broadcast Reception ......................17
Lock Feature ................................................18
Keyboard Beeper .........................................18
Channel Step Selection ................................19
Display Brightness.......................................19
RF Squelch ..................................................20
Repeater Operation ......................................21
Repeater Splits .........................................21
Standard Repeater Shift .......................21
Automatic Repeater Shift (ARS) .........22
Separate Transmit Frequency Memory
(“Odd Splits”)................................23
CTCSS/DCS Operation ...............................24
CTCSS Operation ....................................24
DCS Operation ........................................25
Tone Search Scanning .............................26
CTCSS/DCS Bell Paging ........................27
Split Tone Operation ...............................27
DTMF Autodialer Operation .......................28
Memory Operation ........................................30
Memory Storage ..........................................30
Memory Recall ............................................31
Labeling Memories ..................................32
Memory Tuning .......................................33
Deleting Memories ..................................32
HOME Channel Memory.............................33
Memory Only Mode ....................................33
Scanning .........................................................34
Basic Scanner Operation .............................34
Scan-Resume Option ...................................34
Memory Skip Scanning ...............................35
Preferential Memory Scan ...........................36
Programmable Band-Scan Limits ................37
Priority Channel Scanning (Dual Watch) ....38
Priority Revert Mode ...............................38
Band Edge Beeper .......................................39
Smart Search Operation ...............................40
Internet Connection Feature .........................41
Packet Operation ...........................................42
Miscellaneous Settings ...................................43
Time-Out Timer...........................................43
Automatic Power-Off...................................43
Programming the Key Assignments.............45
MIC Gain Control ........................................46
Reset Procedure ............................................. 47
Microprocessor Resetting ............................47
Set Mode Resetting......................................47
Cloning ............................................................48
“Set” (Menu) Mode ........................................49
1FT-2800M OPERATING MANUAL
The Yaesu FT-2800M is a deluxe, rugged FM mobile transceiver providing high power
output and outstanding receiver performance for the 144 MHz Amateur band. Included in
the FT-2800M’s feature complement are:
r65 Watts of power output, with selection of four power levels for every operating situa-
tion.
rExpanded receiver coverage: 137-174 MHz.
rKeyboard entry of operating frequencies from the microphone.
rExcellent protection from receiver intermodulation distortion, thanks to Yaesu’s renowned
Advanced Track Tuning front end.
r221 memories which can store repeater shifts, odd repeater shifts, CTCSS/DCS tones,
and 6-character Alpha-Numeric labels for easy channel recognition.
r10 NOAA Weather Broadcast Channels, with Weather Alert.
rBuilt-in CTCSS and DCS Encoder/Decoder circuits.
rThe Smart SearchTM feature, which automatically sweeps a band and loads active fre-
quencies into dedicated memory banks, is ideal for identifying active repeaters when
visiting a city for the first time.
rExtensive Menu system, which allows customization of a number of transceiver perfor-
mance characteristics.
rThe Yaesu-exclusive multi-function LCD display.
Additional features include a transmit Time-Out-Timer (TOT), Automatic Power-Off (APO),
Automatic Repeater Shift (ARS), plus provision for reduction of the Tx deviation in areas of
high channel congestion. And an RF Squelch circuit allows the owner to set the squelch to
open at a programmable setting of the S-Meter, thus reducing guesswork in setting the squelch
threshold.
Congratulations on your purchase of the FT-2800M! Whether this is your first rig, or if
Yaesu equipment is already the backbone of your station, the Vertex Standard organization
is committed to ensuring your enjoyment of this high-performance transceiver, which should
provide you with many years of satisfying operation. Our dealer network and technical sup-
port personnel stand behind every product we sell, and we invite you to contact us should
you require technical advice or assistance.
We recommend that you read this manual in its entirety prior to installing the FT-2800M, so
that you fully understand the capabilities of your new transceiver.
INTRODUCTION


Product specificaties

Merk: Yaesu
Categorie: Zendapparatuur
Model: FT-2800

Heb je hulp nodig?

Als je hulp nodig hebt met Yaesu FT-2800 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden