XYZprinting da Vinci miniMaker Handleiding

XYZprinting 3D Printer da Vinci miniMaker

Lees hieronder de 📖 handleiding in het Nederlandse voor XYZprinting da Vinci miniMaker (18 pagina's) in de categorie 3D Printer. Deze handleiding was nuttig voor 75 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/18

da Vinci Mini Series

User Manual

Specification

Product Overview

Button and Indicator light

Unpacking

Accessory Checklist

Important Safety Notes

Extruder module installation

Accessory installation

XYZware operation

Wi-Fi setup (da Vinci Mini w only)

Advanced XYZware operation

Function descriptions

Using the accessory tools

Print Bed Adjustment

Error message and Action

Other: Wi-Fi setup on MAC

English

V3 - 1 -

Guide tube

Feed module

Filament

Extruder module

Function button

/ status indicator

Print bed

Filament holder

Power connector

USB port

Power switch

Solid green

Flashing green

Solid red

Flashing red

Solid orange

Flashing orange

Pulsing orange

Indicator signals Status Action

Standby/Ready to print

Receiving data

General error

Critical error

Printing

Paused

Press the button to return to printing status, refer

to instructions in software to fix the issue.

To pause the print, press the button once. To

cancel the print, press and hold the button for 5

seconds.

Job complete (printing complete /

printing cancellation complete)

If the printer encounters issues, please refer to the XYZware screen troubleshooting instruction to fix

the issues.

Refer to instructions in the software to solve the

issue or reboot the Mini.

To resume the print, press the button once.

To return to , press the Ready to print

button once.

Specification

400 x 336 x 362 mm

8 KG

Fuse Filament Fabrication (FFF)

PLA

1.75 mm

0.4 mm

150 x 150 x 150 mm

0.1/0.2/0.3/0.4mm

USB 2.0 (da Vinci miniMaker)

USB 2.0/ WiFi (da Vinci Mini w)

XYZware

STL / 3W

Dimensions

Weight

Print Technology

Print Material

Filament Diameter

Nozzle Diameter　

Print Dimension

Print Resolution　

Connectivity

Print Software

File Format

Button and Indicator light

Product Overview

- 2 -

• Before using this printer, remove all fixed materials from the

extruder module and print bed. Switching on the printer without

removing these fixed materials may damage the machine.

• Be sure to remove the plastic packaging and 4 clips from the

shafts as illustrated on the right.

• Do not use the printer in dusty high humidity or outdoor environments.

• Place the printer on a stable and even surface to avoid it falling and causing serious injury.

• Do not put your hand into the machine during operation to avoid collision risk due to

movement of the machine or to avoid burn due to high temperature.

1. Quick Guide, Warranty Card

Keep original packaging materials in case you need to send your

unit back for repair during the warranty period.

If other packing materials are used instead, the printer may

become damaged during transportation. In such a situation,

XYZprinting reserves the right to charge a repair fee.

Notes

13. Cleaning Wire x 511. Clea ush

2. Power Adapter 3. Power Cord 4. USB Wire 5. Extruder Module

7. Guide Tube 8. Bundled Filament 9. Filament Spool Ring

(installed on the filament spool)

6. Scraper

14. Leveling tool

12. Feeding Path g Wire

10. Bed Tape X 3pcs （Only replace

the reusable tape when it is worn.）

16. Feeding Tube Grip X1

(For replacing and installing

the Feeding Tube Grip,

please watch the tutorial

video on XYZprinting official

website)

15. PET Protection cover

Unpacking

Important Safety Notes

Accessory Checklist

- 3 -

Product specificaties

Merk:	XYZprinting
Categorie:	3D Printer
Model:	da Vinci miniMaker
Kleur van het product:	Meerkleurig
Gewicht:	6850 g
Breedte:	390 mm
Diepte:	335 mm
Hoogte:	360 mm
Gewicht verpakking:	11500 g
Breedte verpakking:	508 mm
Diepte verpakking:	395 mm
Hoogte verpakking:	475 mm
USB-poort:	Ja
Ethernet LAN:	Nee
Geïntegreerde geheugenkaartlezer:	Nee
USB-versie:	2.0
Ondersteunt Windows:	Ja
Temperatuur bij opslag:	0 - 38 °C
Mac-compatibiliteit:	Ja
Ondersteunt Linux:	Ja
Printtechnologie:	Fused Filament Fabrication (FFF)
Wifi:	Nee
AC-ingangsspanning:	100/240 V
Stroomverbruik (typisch):	60 W
Bedrijfstemperatuur (T-T):	15 - 32 °C
Breedte mondstuk:	0.4 mm
Printmateriaal:	Polyethylene Terephthalate Glycol (PETG), Polylactic acid (PLA)
Maximale printsnelheid:	120 mm³/s
Ondersteunde filamentdikte:	1.75 mm
Maximaal afdrukformaat:	150 x 150 x 150 mm
Laagdikte (min):	0.1 mm
Laagdikte (max):	0.4 mm
Aantal printkoppen:	1
Maximale extrudertiptemperatuur:	240 °C
Ondersteunde modelbestandsindelingen:	stl
Maximale bewegingssnelheid:	230 mm/sec