Xsarius SG-3100 DiSEqC H-H Motor Handleiding
Xsarius
Digitale ontvanger
SG-3100 DiSEqC H-H Motor
Bekijk gratis de handleiding van Xsarius SG-3100 DiSEqC H-H Motor (12 pagina’s), behorend tot de categorie Digitale ontvanger. Deze gids werd als nuttig beoordeeld door 79 mensen en kreeg gemiddeld 5.0 sterren uit 40 reviews. Heb je een vraag over Xsarius SG-3100 DiSEqC H-H Motor of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/12
Manual
High-end DiSEqC 1.2 satellite rotor
Xsarius SG-3100 DiSEqC H-H Mount
INSTALLING THE MOUNT
1.Assemble the H-H Mount as the following diagram.
2.Make sure the mounting tube indicates 0°.Otherwise, driver the mounting tube 2 to exact 0°
via the manual buttons on the bottom of the mount(the cable must be connected to the
receiver that is switched on).
3.Make sure the mounting pole is exactly vertical before installation.
4.Fix the H-H Mount onto the Mounting pole or stand and tighten the two U-screws 4 by the
clamp 6 and nut 5 evenly. Make sure there is no obstacle in the southern sky, such as a tree
or building.
1
ALIGNMENT OF THE MOUNT
1. Aiming TRUE SOUTH.
Attaching the Antenna Dish to the Mount. Make sure it is at the center of the mounting tube.
Rotate the mount together with the antenna toward TRUE SOUTH. You can nd the TRUE
SOUTH via the magnetic variation table and a compass that indicates the MAGNETIC
SOUTH.
2. Setting Elevation Angle.(A)
Adjust the motor elevation angle via the Inclinoneter or the Elevation / Latitude scale on both
sides of the Motor according to the Latitude of your position.
3. Setting Declination Angle.(B)
Find the Declination Angle by the attached ANGLE TABLE.
Set the Declination Angle by the scale on the antenna dish. The reading on the antenna scale
should be:
35°-DECLINATION ANGLE
4. Drive the antenna east and west via the manual buttons on the bottom of the Mount to check if
the reception arc is correct. If not , adjust the direction, elevation, and declination angle to nd the
best reception.
P.S. In order to have power to drive the antenna, please connect the Mount to the receiver or
interface box via coaxial cable rst.
2
Product specificaties
| Merk: | Xsarius |
| Categorie: | Digitale ontvanger |
| Model: | SG-3100 DiSEqC H-H Motor |
Heb je hulp nodig?
Als je hulp nodig hebt met Xsarius SG-3100 DiSEqC H-H Motor stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Digitale ontvanger Xsarius
10 April 2023
10 April 2023
10 April 2023
Handleiding Digitale ontvanger
- Telestar
- Metronic
- Vantage
- Topfield
- Universum
- Lorenzen
- Opticum
- Digittrade
- Ziggo
- Delta
- Amiko
- Dream
- Rebox
- Synaps
- Xtrend
Nieuwste handleidingen voor Digitale ontvanger
16 Oktober 2023
16 Oktober 2023
3 Oktober 2023
1 Oktober 2023
1 Oktober 2023
1 Oktober 2023
1 Oktober 2023
1 Oktober 2023
1 Oktober 2023
1 Oktober 2023