XPower 8DH25 Handleiding

XPower Heater 8DH25

Lees hieronder de đź“– handleiding in het Nederlandse voor XPower 8DH25 (1 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
DUCTING HOSE USER MANUAL XPOWER Manufacture Inc.
220 Clary Avenue
San Gabriel, CA 91776, USA
Tel: 626-285-3301 Fax: 626-285-3302
www.xpower.com
Models: 8DH25, 8DHC25, 12DH25,
16DH15, 16DH25
A. 8DH25 / 12DH25
When used, untie the strip of the two open sides of the product, and
expand the hose inside. For ventilating (exhuausting), attach side A to
the outtake (intake) of the fan, fasten the belt on side A of the hose.
When finished, compress side B of the hose into the intake side. Tie
up the strip of both sides.
(Continued on back page)
Thank you for purchasing XPOWER Flexible PVC Ducting Hose. This product is compatible with XPOWER
confined space fan and XPOWER Axial Fan, to help set up a breeze for a variety of industrial, residential, and
construction applications. Please read and save these instructions.
1. Do not use or store this product under extreme environments, including but not limtited to, high or low
temperature, corrosive or solvent chemical exposure.
2. Make sure children have no access to this product.
Introduction
Safety Instruction
Hose Model 8DH25, 8DHC25 12DH25 16DH15, 16DH25
Compatible Fan Model X-12 X-41ATR, X-47ATRX-8
Installation & Uninstallation
Compatible Products
Side B Switch
Airflow
Direction
Arrow
OuttakeSide A Intake
8DH15 / 8DH25
X-8 / X-12
B. 8DHC25
When used, open the caps of the carrier. Expand the hose. For
ventilating (exhuausting), attach side A to the outtake (intake) of the
fan, fasten the belt on side A of the hose.
When finished, compress the hose from side B into the carrier. Close
the cap.
C. 16DH15 / 16DH25
When used, untie the rope of the two open sides of the product, and
expand the hose inside. Before install, make sure an addtional adapter,
16DHK is safely attached the the fan. For ventilating (exhuausting), attach
the 16DHK's intake side to the outtake (intake) of the fan. Then install the
intake side of the hose onto the 16DHK adapter. Fasten the rope on it.
When finished, compress the outtake side of the hose into the intake
side. Tie up the strip of both sides. To uninstall the 16DHK from the
fan is recommended.
XPOWER® Logo
Switch
Airflow
Direction
Arrow
Outtake
Outtake
Side B
Side B
16DHK X-41ATR / X-47ATR
Intake
Intake
Side A
Side A
16DH15 / 16DH25
8DHC25 X-8


Product specificaties

Merk: XPower
Categorie: Heater
Model: 8DH25

Heb je hulp nodig?

Als je hulp nodig hebt met XPower 8DH25 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Heater XPower

Handleiding Heater

Nieuwste handleidingen voor Heater