XPG Nexus Plus Handleiding

Bekijk gratis de handleiding van XPG Nexus Plus (2 pagina’s), behorend tot de categorie Gamestoel. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.6 sterren uit 2 reviews. Heb je een vraag over XPG Nexus Plus of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Package ContentAttention

InstallationOperating Instructions

IRIL

M5x8

M8x25

1

5

1

1

2

1

1

16

2

1

1

1

1

A

B

C

D

E

F

G

H

I

J

K

L

M

N1

•Clear a workspace for assembling the chair.

•Lay out all parts listed in the Parts List. A clear workspace helps you verify

that all pieces are present.

•We suggest to place the protective foam or cardboard from the packaging

on the floor while assembling to avoid accidental damage or scratches to

both the floor and your new chair.

•Keep all packing materials until assembly is complete to avoid misplacing

smaller parts or hardware.

•Keep small parts and pieces away from children and pets.

•Check and tighten all screws one more time on the chair before use.

• Insert the 5 casters (H) into the star base (C) until they click

into place.

• Insert the gas lift (F) into the base (C) and attach the gas lift

cover (E).

• Align the Seat Plate (D) with the 4 holes on the bottom of

the Seat Cushion (B).

• Ensure the "FRONT" marking faces forward, then secure it

using 4x M8*25mm screws (J) with the provided tool (L).

• Attach the Recliner Mechanism Cover (G) and secure it

with an M5*12 (K) screw on each side.

• Snap on the Cover Studs (M) to conceal the screw holes.

• Place the assembled Seat Cushion

(B) with Seat Plate (D) onto the Gas

Lift (F) and press down until fully

engaged.

• You will hear a “Click” when the gas

lift is securely attached to the base.

Then, place the Head Pillow (I) in

position.

• Align the Back Cushion (A) with the Seat Cushion (B) and

secure the side rails to the corresponding holes.

• Use 4 M8*25mm screws (J) and tighten with the Allen Key (L).

• Ensure the armrests face

forward and are aligned to the

correct side (Left/Right).

• Secure the Arms (N) to the Seat

Cushion (B) with 8x M8*25mm

Screws (J).

• Insert the lumbar adjustment

lever (A) into the designated slot

on the bottom of the backrest (B)

until it clicks into place.

1

2

3

4

5

6

Dynamic Lumbar Support System

Armrest Height AdjustmentArmrest Width Adjustment

Backrest Recline AdjustmentSeat Height Adjustment

•Extend Lumbar Support: Pull the lever upward to

extend the lumbar support cushion.

•Adjust Support: Lean back against the support to

adjust its position while keeping the lever pulled.

Once extended, the lumbar support conforms closely

to your back, moving naturally with each twist and

turn, adapting to your spine's movements.

Pull the lever up and lean back to

adjust the angle (90°–155°).

Raise:Lean forward, lift the

right-side handle, and let the

chair rise.

Lower: While seated, lift the

handle and use your weight to

lower the chair. Release to stop.

Locate Lever:Find the lever on the

outer side beneath each armrest.

Adjust Height: While pulling the

lever upward, raise or lower the

armrest to your preferred height.

Release the lever to secure the

position.

Adjust Width: Press the button on

the back inner side of the armrest to

slide it inward or outward. Release the

button to lock the position.

Armrest Rotation AdjustmentArmrest Forward/

Backward Adjustment

Rotate the armrest left or

right for optimal positioning.

Press the front inner button to slide

the armrest forward or backward.

Product website

NEXUS PLUS

INSTALLATION GUIDE

GAMING CHAIR

YEAR

LIMITED

WARRANTY

LIMITED

WARRANTY

22

Product specificaties