Xilence M704RGB Handleiding

Bekijk gratis de handleiding van Xilence M704RGB (1 pagina’s), behorend tot de categorie Hardwarekoeling. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.3 sterren uit 6 reviews. Heb je een vraag over Xilence M704RGB of wil je andere gebruikers van dit product iets vragen? Stel een vraag

M704RGB

Installation Manual

Component ListAMD AM4/AM3(+)/FM2(+)/FM1Intel LGA1150/1151/1155/1156Intel LGA1150/1151/1155/1156Intel LGA2066/2011Intel LGA2066/2011AMD AM4/AM3(+)/FM2(+)/FM1Fan MountingRGB Control by MotherboardRGB Splitter Usage

RGB Control by Internal RGB Controller

Cooler (and Fan) x1

LGA115X Backplate x1

Bracket Mounting Screws x4

Fan Mounting Clips x4

Thermal Grease x1

RGB Splitter x1

RGB Internal Controller x1

LGA115X Bracket x1

AMD Bracket x2

LGA2066/2011 Bracket x2

STEP 1

Mount Intel LGA115X brackets onto the

cooler base with 4 screws.

STEP 1

Mount Intel LGA2066/2011 brackets

onto the cooler base with 4 screws.

STEP 2

Mount AMD brackets onto the cooler base

with 4 screws.

STEP 1

Remove the orignal AMD platic retention frame, but keep the original backplate.

STEP 3

Evenly apply a thin layer of thermal grease to the CPU surface.

STEP 2

Evenly apply a thin layer of thermal grease to the CPU surface.

STEP 3

Evenly apply a thin layer of thermal grease to the CPU surface.

STEP 4

Put the cooler onto the CPU,

and thread the screws into the

backplate to secure.

STEP 3

Put the cooler onto the CPU, and thread the screws into the backplate to secure.

STEP 4

Put the cooler onto the CPU,

and thread the screws into the backplate

to secure.

Mount the fan onto the heatsink with the fan clips.

Connect the fan RGB cable to

motherboard, and make sure the arrow

points to the pin indicating “12V”.

RGB Splitter is equipped to extend more RGB fans to your system. When you

connect it to motherboard, make sure the arrow points to the pin indicating

“12V”. When you connect the fans to the splitter, make sure the arrow pins

connect to the pins with arrow too.

STEP 2

Stick the LGA115X backplate onto the

back of the motherboard.

Press this button to switch the fan into a static/fixed single color mode:

There’re up to 20 different colors for choice including green, blue, red,

orange, purple, white, etc.

1) In dynamic mode, this button will change the color switching speed;

2) In static mode, this button will control the brightness of the lighting;

3) Long press this button to turn off the LED lighting and short press to

turn on the lighting.

Press this button to switch the fan into dynamic modes:

Blinking mode (on/off): 7 different colors in turn -> one of these colors

Changing mode: 7 colors in trun -> 7 colors in turn backward -> RGB in turn

Breathing mode: 7 colors in trun -> 7 colors in trun backward -> RGB in turn

Product specificaties