Xiaomi Roborock E2 Handleiding

Xiaomi Stofzuiger Roborock E2

Bekijk gratis de handleiding van Xiaomi Roborock E2 (33 pagina’s), behorend tot de categorie Stofzuiger. Deze gids werd als nuttig beoordeeld door 89 mensen en kreeg gemiddeld 4.4 sterren uit 7 reviews. Heb je een vraag over Xiaomi Roborock E2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PDF downloaden

Pagina 1/33

User Manual of Xiaowa Robotic Vacuum Cleaner

Please read this user manual carefully before use and keep it well for future reference

Beoordeel deze handleiding

4.4/5 (7 Beoordelingen)

Product specificaties

Merk:	Xiaomi
Categorie:	Stofzuiger
Model:	Roborock E2

Foutcodes Xiaomi Roborock E2

Foutcodes uit de officiële handleiding, met betekenis en oplossing.

Code	Betekenis	Oplossing
10	Filter error	Check that the filter is dry or clean the filter. Leave it to dry for at least 24 hours if not completely dry. If the problem persists, replace the filter.
11	A high-intensity magnetic field is detected	The machine is too close to the virtual wall when starting up. Move it to a new location and start it.
12	Battery level is too low	Charge the battery before use.
13	Charging error	Use a dry cloth to wipe the charging contact of the machine and the charging tab of the dock charger.
14	Battery error	The battery temperature is too high or too low. Wait until the battery temperature is normal before use.
17	Side brush module error	Try resetting the system.
18	Vacuum cleaner fan error	Try resetting the system.
2	Bumper is stuck	Lightly and repeatedly tap the bumper to remove foreign matter. If no foreign matter is found, move the machine to a new location and start it.
20	Motion tracking sensor error	The motion tracking sensor may be dirty or blocked. Use a dry cloth to wipe the motion tracking sensor and place the machine back to its original location and start it.
23	Dock charger signal emission area blocked	The dock charger is blocked by dust or foreign matter. Please remove it.
3	The wheels are suspended	Move the machine to a place near its original location and start it.
4	The machine is suspended	Move it to a place near its original location and start it. Wipe the cliff sensor to eliminate this problem if it is too dirty.
5	The main brush may be entangled with foreign matter	Remove the main brush and its bearing for cleaning.
6	The side brush may be entangled with foreign matter	Remove and clean the side brush.
7	Main wheel exception	Check whether the main wheel is entangled with foreign matter or move the machine to a place near its original location and start it.
8	The machine may get stuck or caught on objects	Clear obstacles around the machine.
9	Dust bin and filter installation error	Reinstall the dust bin and filter and check that they are installed in place. If the problem persists, try replacing the filter.