Xiaomi Hot Pot Cooker BHR9704EU Handleiding

Bekijk gratis de handleiding van Xiaomi Hot Pot Cooker BHR9704EU (1 pagina’s), behorend tot de categorie Pan. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.8 sterren uit 3 reviews. Heb je een vraag over Xiaomi Hot Pot Cooker BHR9704EU of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Multifunctional Hot Pot Cooker 6L User Manual

•

01

英

07

Care & Maintenance

Package Dimensions: 417 × 345 × 260 mm

Net Weight: 3.8 kg

Gross Weight: 4.7 kg

Color: White

Rated Frequency: 50/60 Hz

Usable Capacity: 4.5 L

Capacity: 6 L

Rated Voltage: 220–240 V~

Specifications

Name: Electric Multi-cookers

Model: MEH01

Rated Power: 2000 W

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which

should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by

handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic

equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential

negative consequences to the environment and human health. Please contact the installer or local authorities for more

information about the location as well as terms and conditions of such collection points.

Hereby, Xiaomi Communications Co., Ltd. declares that the radio equipment type Electric Multi-cookers MEH01 is in

compliance with Directive 2014/35/EU. The full text of the EU declaration of conformity is available at the following

internet address: hps://www.mi.com/global/support/terms/declaration

Power consumption

Time to enter the condition

off mode:≤0.5 W

standby mode:≤20 min

Manufacturer:

Xiaomi Communications Co., Ltd.

Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, 100085, China

Factory: Ningbo Careline Electric Appliance Co., Ltd.

Address: No.888, WeiYi Road, Hangzhou BayNew Area, Ningbo, 315327, Zhejiang, China

Imported by: GRIMALKIN CORPORATION

Address: #46 Joy St., Grace Village, Brgy. Apolonio Samson, Quezon City

For further information, please go to www.mi.com

User Manual Version: V1.0

22

Power Plug

The hot pot cooker should be descaled regularly, at least once a month, or more frequently if

the water quality is poor.

If you use tap water, the inner pot will develop spots of limescale, which is normal. Use a

scouring pad to gently remove the limescale from the inner pot. You can use the following

methods to remove severe limescale.

1. Using white vinegar: Pour an appropriate amount of white vinegar into the hot pot cooker,

let it stand for 1 hour without heating, pour out the white vinegar, and clean the hot pot

cooker with clean water for 5 to 6 times. If the limescale remains, repeat the preceding steps.

2. Using citric acid: Pour an appropriate amount of water into the hot pot cooker, boil it and

turn off the heat. Add 25 g of citric acid and let it stand for 15 minutes, then rinse with clean

water 5 to 6 times. If the limescale remains, repeat the preceding steps.

Cleaning the limescale

1

2

8

97

345

6

2

Stew

0102

Do not allow children to get close to or play with plastic films

and the packaging box to avoid suffocation accidents.

When adjusting the cooking modes:

Do not heat the hot pot cooker without water to avoid boiling

dry. Before using the hot pot cooker, ensure that there is

enough water in it and connect it to power.

The normal operating altitude of the hot pot cooker ranges

from 0 to 2000 meters.

Ensure that the electrical socket where the hot pot cooker is

plugged in is properly grounded to avoid electric shocks or

other safety hazards.

Do not tamper with the switch piece on the base of the hot pot

cooker.

Do not use metal utensils for cooking to avoid damaging the

coating of the hot pot cooker.

03

04

1) Precooking status: Press the "On/Off" buon to turn on the hot pot cooker, which will

enter the precooking status with the stew mode selected by default with its indicator

blinking. The display shows the default power level parameters. The water heating

indicator blinks, while the other modes‘ indicators keep on.

In the precooking status, the hot pot cooker automatically turns off if there is no operation

within 10 minutes. In the water heating and cooking status, the hot pot cooker will give two

beeps as a notification sound every 30 seconds if it is paused for more than 10 minutes

without any operation. The hot pot cooker automatically turns off if it is paused for more

than 20 minutes without any operation. Press the "On/Off" buon to turn it on.

Aer the hot pot cooker is plugged in for the first time, the full display of the hot pot cooker

lights up, and the hot pot cooker is turned off 1 second later. When you press the "On/Off"

buon to turn on the hot pot cooker, it will enter the precooking status with the stew mode

selected by default with its indicator blinking. The display shows the default power level

parameters. The water heating indicator blinks, while the other modes‘ indicators keep on.

Aer the power cord is connected, the display lights up, and the hot pot cooker is turned off

1 second later.

CAUTION: The hot pot cooker may give off a minor odor on first use. It is recommended to

add water and run the hot pot cooker for 5 minutes to remove the odor.

2) Water heating status and paused status during water heating: Press the "Mode" buon

to cycle through the modes, and the display shows cooking time when the modes are

cycled through. The display shows the cooking power level if there is no operation within 5

seconds. The selected mode keeps on, while other modes‘ indicators light up at half

brightness.

3) In the water boiling status, press the "Mode" buon to cycle through the modes, and the

display shows cooking time when the modes are cycled through. The display shows the

cooking power level when the hot pot cooker is switched to the DIY mode. The selected

mode's indicator blinks, while other modes‘ indicators keep on.

Note: If cooking time is set in the DIY mode before cooking, before water heating, or in the paused status during water

heating, the adjusted time is shown in the water boiling status.

Notes:

(1) When adjusting time, press and hold the "Start/Cancel" buon to cancel the time adjustment.

(2) When the cooking time of the hot pot cooker is less than 1 minute, the display shows a countdown timer starting

from 59 seconds.

The power level can be adjusted from level 1 to level 6. When adjusting the power level,

press the "+/-" buon to gradually increase or decrease by one level.

1) Precooking status and paused status during water heating:

Aer pressing the "+/-" buon to adjust the power level, press the "Start/Cancel" buon

to start cooking. When adjusting the power level, press and hold the "Start/Cancel"

buon to cancel the power level adjustment and return to the previous power level

parameters.

2) Water heating status:

Aer you press the "+/-" buon to adjust the power level, the hot pot cooker starts

cooking immediately based on new parameters.

3) Water boiling status and cooking status:

Aer pressing the "Time/Power" buon to switch to power level adjustment and pressing

the "+/-" buon to adjust the power level, the hot pot cooker will start cooking

immediately based on new parameters.

4) Paused status during cooking:

Aer pressing the "Time/Power" buon to switch to power level adjustment, press the

"+/-" buon to adjust the power level and press the "Start/Cancel" buon to start

cooking. When adjusting the power level, press and hold the "Start/Cancel" buon to

cancel the power level adjustment and return to the previous power level parameters.

1) Precooking status and paused status during water heating: press the "Time/Power"

buon to switch to time adjustment. Press the "+/-" buon to adjust time, and press the

"Start/Cancel" buon to start cooking.

2) Water heating status and DIY mode cooking status: Press the "Time/Power" buon to

switch to time adjustment. Press the "+/-" buon to adjust time. If there is no operation

within 5 seconds, the hot pot cooker starts cooking based on new parameters.

3) Water boiling status and paused status during cooking: Press the "+/-" buon to adjust

time, and press the "Start/Cancel" buon to start cooking.

4) Cooking status: Press the "+/-" buon to adjust time. If there is no operation within 5

seconds, the hot pot cooker starts cooking based on new parameters.

Mode selection

Off status

Initial status

Power level adjustment

Press the "+/-" buon to adjust the operating time of the hot pot cooker. If the operating

time is less than 2 minutes, press the buon to gradually increase or decrease by 5

seconds, and press and hold the buon to gradually increase or decrease by 15 seconds.

If the operating time is at least 2 minutes but less than 5 minutes, press the buon to

gradually increase or decrease by 30 seconds, and press and hold the buon to gradually

increase or decrease by 1 minute. If the operating time is at least 5 minutes, press the

buon to gradually increase or decrease by 1 minute, and press and hold the buon to

gradually increase or decrease by 5 minutes.

Time adjustment

Press the "Start/Cancel" buon to start boiling water. When the water boils, you can start

cooking. If you need to set a time reminder, press the "Start/Cancel" buon again to

enter the countdown. Aer the countdown ends, the hot pot cooker will automatically

enter the keeping warm status and emit a long beep to remind you to take out the

ingredients timely. Please repeat the above steps if you need to set the reminder again.

Cooking

Notes:

(1) In the water heating and cooking status, press the "Start/Cancel" buon to pause cooking, and press the

"Start/Cancel" buon again to start cooking.

(2) Aer the water boils, press the "Start/Cancel" buon to enter the countdown.

(3) Blinking of the water heating indicator indicates that the hot pot cooker needs to heat water first. When the water

heating indicator keeps on, and only the selected mode keeps on, while other modes light up at half brightness, it

indicates that the water is being heated. When the water heating indicator keeps on, other modes light up, and the

display shows the cooking time, it indicates that the hot pot cooker has entered the water boiling status.

(4) Aer cooking is completed in the hot pot cooker, the residual heat from the heating element can cause the hot pot

cooker to remain hot for a period of time, and the soup continues boiling for a short while.

When the hot pot cooker boils dry, the display shows E3, and the hot pot cooker stops

operating, all the buons are inactive, and the buzzer gives three beeps as an error

notification sound. Aer the temperature drops or water is added, press the

"Start/Cancel" buon to resume cooking.

Boiling dry notification

If the hot pot cooker detects an error or a malfunction, the display shows an error code E1

or E2, accompanied by three beeps as a notification sound. Then, the hot pot cooker stops

operating. To resolve this error, please refer to the Troubleshooting section in the user

manual.

Device malfunction/error notifications

Operating Instructions

Product Overview

Control Panel

Do not use any accessories that are not recommended by

the manufacturer.

During cooking or just aer cooking, the surface of the hot

pot cooker is hot. Do not allow children to approach. Do not

directly touch the hot pot cooker with hands to avoid scalds.

If the water volume in the hot pot cooker is greater than or

equal to 4 L and you cook with the lid on, open the lid

promptly aer the water starts boiling. Otherwise, overflow

may occur.

Illustrations of product, accessories, and user interface in

the user manual are for reference purposes only. Actual

product and functions may vary due to product

enhancements.

Do not immerse in any liquids.

WARNING! Avoid spillage on the connector.

This appliance is only to be used with the stand/base

provided.

This appliance is intended to be used in household and

similar applications such as:

– staff kitchen areas in shops, offices and other working

environments;

– farm houses;

– by clients in hotels, motels and other residential type

environments;

– bed and breakfast type environments.

Read this manual carefully before use, and retain it for future reference.

This product is for household use only.

Safety Instructions

Only the professional repair staff can modify the internal

wiring of the hot pot cooker.

Only use a grounded electrical outlet with a rated current of

10 A to avoid the risk of fire and other potential hazards.

Please keep the hot pot cooker and the power cord out of

the reach of children aged under 8.

Do not plug or unplug the power cord with wet hands to avoid

the risk of an electric shock.

This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children unless they are older than 8 and supervised.

To ensure your safety and minimize the risk of personal

injury or property damage, please observe and obey the

following safety precautions.

To prevent danger such as electric shock or short

circuit, do not immerse this product and power cord

in any liquid.

If the power cord is damaged or broken, it must be replaced

by professionals from the manufacturer, aer-sales service

department, or departments of similar functions to avoid

safety hazards.

During operation, the hot pot cooker generates high

temperature and steam. Do not touch or get too close to

the steam vent and other hot areas to prevent scalds.

Do not use a power cord with loose connection or poor

contact.

Do not let the power cord cross through sharp objects to

avoid damage to the power cord.

Do not excessively pinch, bend, twist, or place heavy

objects on the power cord to prevent exposing or

breaking its core.

Stop using the hot pot cooker immediately and unplug it

from power if it malfunctions or breaks down.

Before using the hot pot cooker, wipe off water on the

heating element at the boom of it to avoid safety risks

such as short circuit.

0506

CAUTIONHot surfaces.：

Troubleshooting

The power cord (two

ends) is not plugged in

securely.

The heating function is

not enabled.

Enable heating according

to the user manual.

Contact the aer-sales

service team.

Contact the aer-sales

service team.

Contact the aer-sales

service team.

Contact the aer-sales

service team.

Contact the aer-sales

service team.

Contact the aer-sales

service team.

Contact the aer-sales

service team.

Clean by boiling water

with sodium bicarbonate.

A circuit board error

occurs.

A heating element error

occurs.

A thermostat error

occurs.

The sensor has a broken

circuit.

The sensor has a short

circuit.

High temperature error

due to boil-dry

First use or long period of

disuse.

A thermostat error occurs.

The hot pot cooker still

heats up aer water has

boiled dry.

Check if the power

supply is live.

Check the plug.

ErrorsPossible CausesSolutions

The display doesn't

light up.

The hot pot cooker does

not operate.

The hot pot cooker does

not heat up.

The display shows E1.

The display shows E2.

The display shows E3.

There is an unpleasant odor.

MAX4.5L

Cooker Lid Handle

Cooker Handle

Insulating

Protective Plate

Hot Pot Cooker

Base

Cooker Lid

Display

Control Buon

CAUTIONS:

1. When you use the hot pot cooker, place the hot pot cooker on the base,

ensuring that the inner side with measurements is in the back.

2. The maximum capacity of the hot pot cooker is 6 L, with the recommended

maximum water level being 4.5 L, to avoid splashing of soup onto the table.

Maintenance Notes

Only professionally trained personnel who have been certified to repair the hot pot cooker

are authorized to repair the hot pot cooker.

Others should not repair the hot pot cooker without permission to avoid causing serious

consequences.

If you experience any errors with the hot pot cooker, refer to the Troubleshooting section

before contacting the aer-sales service team.

If the error persists, please unplug the power cord to disconnect from power and contact the

aer-sales service team.

6. Mode Buon 7. Time/Power Buon 8. Water Heating Indicator

1. On/Off Buon 2. +/- Buon 3. Cooking Indicator 4. Display 5. Paused Indicator

9. Start/Cancel Buon

Product specificaties