Xantech DL85 Handleiding

Bekijk gratis de handleiding van Xantech DL85 (3 pagina’s), behorend tot de categorie Receiver. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 5.0 sterren uit 6 reviews. Heb je een vraag over Xantech DL85 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTALLATION INSTRUCTIONS

DL85

Dinky Link™ Surface Mount

Plasma\LCD\LED\CFL Friendly

IR Receiver

1

DESCRIPTION

These small IR receivers have been designed for mounting in very small

spaces. They may be mounted under shelf edges, cabinet ledges, in wall

speakers, etc. – anywhere an inconspicuous appearance is desired. The high

sensitivity of these receivers allows placement behind speaker grilles and still

receive IR commands up to 80 feet away*.

FEATURES

•Wire channel for clean installation.

•System testing red-talk-back LED.

•Includes 3-Terminal Block for easy extension to remote room locations.

SPECIFICATIONS

•Infrared carrier frequency bandwidth: 30 - 60 kHz.

•Reception range: Up to 80 feet.*

•Reception angle: +/- 60 degrees.

•Cable requirements: See “INSTALLATION” below.

•Max. Transmission length: 1 mile using 18 gauge wire.

•Maximum current output: 100mA.

•Drives IR emitters through Xantech Connecting Blocks, Controllers, etc.

•Dimensions: 2.55” x 0.55” x 0.35” (65mm x 14mm x 9mm).

•Power requirements: +12VDC, 10mA.

* Depending on remote control output strength and ambient conditions.

MOUNTING

The IR receiver can be mounted to any at surface, using the two-sided

adhesive tape supplied. Two screws are included for mounting the 3-terminal

block provided with the IR receiver.

An additional feature is a wire channel on the rear of the surface mount IR

receiver. This will give the installer the ability to provide clean wire dressing in

any direction.

Product specificaties