Worx WG385 Handleiding

Worx Zaagmachine WG385

Lees hieronder de 📖 handleiding in het Nederlandse voor Worx WG385 (48 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/48

Cordless Chainsaw

Tronçonneuse sans fil

Sierra de cadena inalámbrica

P02

P18

P32

PRODUCT SAFETY

WARNING: Some dust created by power

sanding, sawing, grinding, drilling and other

construction activities contains chemicals known to

the state of California to cause cancer, birth defects

or other reproductive harm. Some examples of these

chemicals are:

• Lead from lead-based paints;

• Crystalline silica from bricks and cement and

other masonry products and

• Arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals:

Work in a well ventilated area, and

Work with approved safety equipment, such as those

dust masks that are specially designed to filter out

microscopic particles.

WARNING: This product can expose you to

chemicals including lead and Di(2-ethylhexyl)

phthalate (DEHP) which are known to the State of

California to cause cancer and birth defects or other

reproductive harm. For more information go to www.

P65Warnings.ca.gov.

GENERAL POWER TOOL

SAFETY WARNINGS

WARNING: Read all safety warnings and

instructions.

Failure to follow the warnings

and instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future

reference.

The term power tool in the warnings refer to your electric

(corded) power tool or battery-operated (cordless) power

tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark

areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust.

Power tools

create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool.

Distractions can cause you

to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with grounded power tools.

Unmodified plugs and matching outlets will reduce

risk of electric shock.

b) Avoid body contact with grounded surfaces such

as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body

is grounded.

c) Do not expose power tools to rain or wet

conditions.

Water entering a power tool will increase

the risk of electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts.

Damaged or entangled cords increase

the risk of electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

f) If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply.

Use of an RCD reduces the risk of

electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication.

moment of inattention while operating power tools

may result in serious personal injury.

b) Use personal protective equipment. Always wear

eye protection.

Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking up

or carrying the tool.

Carrying power tools with your

finger on the switch or energizing power tools that

have the switch on invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on.

A wrench or a key left

attached to a rotating part of the power tool may result

in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times.

This enables better control of

the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewelry. Keep your hair, clothing and gloves away

from moving parts.

Loose clothes, jewelry or long

hair can be caught in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used.

Use of dust collection

can reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application.

The correct power

tool will do the job better and safer at the rate for

which it was designed.

b) Do not use the power tool if the switch does not

turn it on and off.

Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

c) Disconnect the plug from the power source and/

or the battery pack from the power tool before

making any adjustments, changing accessories,

or storing power tools.

Such preventive safety

measures reduce the risk of starting the power tool

accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool.

Power tools are dangerous in the hands

of untrained users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and

any other condition that may affect the power

tools operation.

If damaged, have the power tool

repaired before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed.

Use of the power

tool for operations different from those intended could

result in a hazardous situation.

5) Battery tool use and care

a) Recharge only with the charger specified by the

manufacturer.

A charger that is suitable for one type

of battery pack may create a risk of fire when used

with another battery pack.

b) Use power tools only with specifically designated

battery packs.

Use of any other battery packs may

create a risk of injury and fire.

c) When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal to

another.

Shorting the battery terminals together may

cause burns or a fire.

d) Under abusive conditions, liquid may be ejected

from the battery; avoid contact.

If contact

accidentally occurs, flush with water. If liquid contacts

eyes, additionally seek medical help. Liquid ejected

from the battery may cause irritation or burns.

6) Service

a) Have your power tool serviced by a qualified

repair person using only identical replacement

parts.

This will ensure that the safety of the power

tool is maintained.

CHAIN SAW SAFETY

WARNINGS

1. Keep all parts of the body away from the saw

chain when the Chain saw is operating. Before

you start the Chain saw, make sure the saw chain

is not contacting anything.

A moment of inattention

while operating Chain saws may cause entanglement

of your clothing or body with the saw chain.

2. Always hold the Chain saw with your right hand

on the rear handle and your left hand on the front

handle.

Holding the Chain saw with a reversed hand

configuration increases the risk of personal injury and

should never be done.

3. Hold the power tool by insulated gripping

surfaces only, because the saw chain may

contact hidden wiring or its own cord.

Saw chains

contacting a live wire may make exposed metal parts

of the power tool live and could give the operator an

electric shock.

4. Wear safety glasses and hearing protection.

Further protective equipment for head, hands,

legs and feet is recommended.

Adequate protective

clothing will reduce personal injury by flying debris or

accidental contact with the saw chain.

5. Do not operate a Chain saw in a tree.

Operation of

a Chain saw while up in a tree may result in personal

injury.

6. Always keep proper footing and operate the

Chain saw only when standing on fixed, secure

and level surface.

Slippery or unstable surfaces such

as ladders may cause a loss of balance or control of

the Chain saw.

7. When cutting a limb that is under tension be

alert for spring back.

When the tension in the wood

fibers is released the spring loaded limb may strike the

operator and/or throw the Chain saw out of control.

8. Use extreme caution when cutting brush and

saplings.

The slender material may catch the saw

chain and be whipped toward you or pull you off

balance.

9. Carry the Chain saw by the front handle with the

Chain saw switched off and away from your body.

hen transporting or storing the Chain saw always

apply the guide bar cover. Proper handling of the Chain

saw will reduce the likelihood of accidental contact

with the moving saw chain.

10. Follow instructions for lubricating, chain

tensioning and changing accessories.

Improperly

tensioned or lubricated chain may either break or

increase the chance for kickback.

11. Keep handles dry, clean, and free from oil and

grease.

Greasy, oily handles are slippery causing loss

of control.

12. Cut wood only. Do not use Chain saw for purposes

not intended. For example: do not use Chain saw

for cutting plastic, masonry or non-wood building

materials.

Use of the Chain saw for operations

different than intended could result in a hazardous

situation.

CAUSES AND OPERATOR PREVENTION OF KICKBACK

Kickback may occur when the nose or tip of the guide bar

touches an object, or when the wood closes in and pinches

the saw chain in the cut.

Tip contact in some cases may cause a sudden reverse

reaction, kicking the guide bar up and back towards the

operator.

Pinching the saw chain along the top of the guide bar may

push the guide bar rapidly back towards the operator.

Either of these reactions may cause you to lose control of

the saw which could result in serious personal injury. Do

not rely exclusively upon the safety devices built into your

saw. As a Chain saw user, you should take several steps to

keep your cutting jobs free from accident or injury.

Kickback is the result of tool misuse and/or incorrect

operating procedures or conditions and can be avoided by

taking proper precautions as given below:

- Maintain a firm grip, with thumbs and fingers

encircling the Chain saw handles, with both

hands on the saw and position your body and arm

to allow you to resist kickback forces.

Kickback

forces can be controlled by the operator, if proper

precautions are taken. Do not let go of the Chain saw.

- Do not overreach and do not cut above shoulder

height.

This helps prevent unintended tip contact and

enables better control of the Chain saw in unexpected

situations.

- Only use

replacement bars and chains specified

by the manufacturer.

Incorrect replacement

bars and chains may cause chain breakage and/or

kickback.

- Follow the manufacturer’s sharpening and

maintenance instructions for the saw chain.

Decreasing the depth gauge height can lead to

increased kickback.

SAFETY WARNINGS FOR

BATTERY PACK

a) Do not dismantle, open or shred cells or battery

pack.

Product specificaties

Merk:	Worx
Categorie:	Zaagmachine
Model:	WG385

Heb je hulp nodig?

Als je hulp nodig hebt met Worx WG385 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Zaagmachine Worx

Worx Nitro WX542.9 Handleiding

26 April 2024

Worx WG324E Handleiding

4 Juli 2023

Worx WX801L.1 Handleiding

28 Juni 2023

Worx WX550.1 Handleiding

1 Juni 2023

Worx WG304.1 Handleiding

8 Mei 2023

Worx WG385 Handleiding

6 Mei 2023

Worx WX420L Handleiding

5 Mei 2023

Worx WX812L Handleiding

4 Mei 2023

Worx WG894E Handleiding

1 Februari 2023

Worx WX439L Handleiding

3 Mei 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Fieldmann FZP 25410-B Handleiding

15 April 2024

Milwaukee M18 BJS Handleiding

10 April 2024

Rona Standard Plus-C Handleiding

10 April 2024

Rona Profi-C Handleiding

10 April 2024

Milwaukee SCS 65 Q Handleiding

10 April 2024

Milwaukee M12 BS Handleiding

10 April 2024

Milwaukee M18 FMCS66 Handleiding

10 April 2024

Milwaukee M18 BSX Handleiding

10 April 2024

Bavaria By Einhell BFS 800E Handleiding

9 April 2024

Bavaria By Einhell BPS 520 E Handleiding

9 April 2024