Worx WG210E Handleiding

Worx Grastrimmer WG210E

Lees hieronder de 📖 handleiding in het Nederlandse voor Worx WG210E (12 pagina's) in de categorie Grastrimmer. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
2
WARNING: Read all safety
warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep cord
away from heat, oil, sharp edges or
moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected
supply. Use of an RCD reduces the risk of
electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, alcohol
or medication. A moment of inattention
while operating power tools may result in
serious personal injury.
b) Use personal protective equipment.
Always wear eye protection.
Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position
before connecting to power source
and/or battery pack, picking up or
carrying the tool. Carrying power
tools with your finger on the switch or
energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
g) If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of
3
dust collection can reduce dust-related
hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use
the correct power tool for your
application. The correct power tool will
do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools. Such preventive
safety measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained
users.
e) Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of the
power tool for operations different from
those intended could result in a hazardous
situation.
5) SERVICE
a) Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
1. Keep all parts of the body away from
the cutter blade. Do not remove
cut material or hold material to
be cut when blades are moving.
Make sure the switch is off when
clearing jammed material. A moment
of inattention while operating the hedge
trimmer may result in serious personal
injury.
2. Carry the hedge trimmer by the
handle with the cutter blade stopped.
When transporting or storing the
hedge trimmer always fit the cutting
device cover. Proper handling of the
hedge trimmer will reduce possible
personal injury from the cutter blades.
3. Keep cable away from cutting area.
During operation the cable may be hidden
in shrubs and can be accidentally cut by
the blade.
4. Hold the power tool by insulated
gripping surfaces only, because the
cutter blade may contact hidden
wiring or its own cord. Cutter blades
contacting a “live” wire may make
exposed metal parts of the power tool
“live” and could give the operator an
electric shock.
5. Check the hedge for foreign objects, e.g.
wire fences.
6. Use both hands when operating the hedge
trimmer. Using one hand could cause loss
of control and result in serious personal
injury.
7. Recommendation for the use of a residual
current device with a tripping current of 30
mA or less.

Product specificaties

Merk: Worx
Categorie: Grastrimmer
Model: WG210E

Heb je hulp nodig?

Als je hulp nodig hebt met Worx WG210E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Grastrimmer Worx

Worx

Worx WG185E Handleiding

26 April 2024
Worx

Worx WG157E Handleiding

26 April 2024
Worx

Worx WG183E Handleiding

17 April 2024
Worx

Worx WG119E Handleiding

17 April 2024
Worx

Worx WG185 Handleiding

17 Augustus 2023
Worx

Worx WG185.9 Handleiding

17 Augustus 2023
Worx

Worx WG173 Handleiding

17 Augustus 2023
Worx

Worx WG173.9 Handleiding

17 Augustus 2023
Worx

Worx WG163.8 Handleiding

17 Augustus 2023
Worx

Worx WG169.9 Handleiding

1 Februari 2023

Handleiding Grastrimmer

Nieuwste handleidingen voor Grastrimmer

Shindaiwa

Shindaiwa T236TS Handleiding

11 April 2024
Fieldmann

Fieldmann FZS 2107-E Handleiding

11 April 2024
Shindaiwa

Shindaiwa B45 Handleiding

11 April 2024
Shindaiwa

Shindaiwa B45LA Handleiding

11 April 2024
Grizzly

Grizzly ERT 3525 Handleiding

27 Maart 2024
Draper

Draper GTP34 Handleiding

27 Maart 2024
Grizzly

Grizzly ART2020-25 Li Handleiding

27 Maart 2024
Draper

Draper GT2318 Handleiding

27 Maart 2024
HSM

HSM G4640 Handleiding

27 Maart 2024
Einhell

Einhell AGS 18 S Handleiding

16 Maart 2024