Wooden Camera 152900 Handleiding

Bekijk gratis de handleiding van Wooden Camera 152900 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 13 mensen en kreeg gemiddeld 4.5 sterren uit 9 reviews. Heb je een vraag over Wooden Camera 152900 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

A=Anton Bauer

B= Hyperdeck Shuttle

C= IDX/Swit

D= Odyssey 7 (NOTE: Install M2.5

locating socket cap on plate

prior to installing 1/4-20 screw)

HOLE CHART

Included:

(5) 1/4-20x3/8 socket button

(3) 1/4-20x5/8 socket button

(4) M3x12mm Phillips pan head ()Anton Bauer

(4) M3x10mm Phillips pan head ()Hyperdeck Shuttle

(4) M3x8mm Phillips pan head ()IDX/Swit

(1) M2.5x4mm socket cap screw ()Odyssey 7

SIDE PLATE (BMSC)

© Wooden Camera, Inc. 2011-2014

1. For single PLATE PLATE attachment, select and three

. 1/4-20x3/8 SCREWS

2. Select CAMERA1/4-20 HOLES, locate on right or left

side of and CAMERA BODYSIDE PLATE.

3. Align 1/4-20 HOLESCAMERA BODYSIDE on and

PLATE, select and tighten with 1/4-20x3/8 SCREWS

allen wrench.

SIDE PLATE

4. For multiple PLATE PLATES attachment, align to

as shown below, select and CAMERA BODY

tighten 1/4-20x5/8 SCREWS with allen wrench.

For attaching accessories find appropriate threaded holes by

using the below. Insert and tighten HOLE CHARTPHILLIPS

PAN HEAD SCREWS1/4-20 SCREWS or into corresponding

hole as shown on the on the next page.HOLE DIAGRAM

Product specificaties