WMD Blender Handleiding
WMD
Niet gecategoriseerd
Blender
Bekijk gratis de handleiding van WMD Blender (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 299 mensen en kreeg gemiddeld 4.9 sterren uit 150 reviews. Heb je een vraag over WMD Blender of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1
B1-2
X
L2
L1
A/B
B1-2
B3-4
X
XCV
L1
L2
INPUT 1-2 BLEND CONTROL
Manual cross-fader for input channels 1 and 2. When signals are applied to both inputs 1
and 2, use this control to smoothly blend between the two signals. This control works as a
full range attenuator if only one of the inputs is occupied.
INPUT 3-4 BLEND CONTROL
Manual cross-fader for input channels 3 and 4. When signals are applied to both
inputs 3 and 4, use this control to smoothly blend between the two signals. This
control works as a full range attenuator if only one of the inputs is occupied.
X-FADE A/B BLEND & OFFSET
This is the manual control for the voltage controlled cross-fader. Use this control to smoothly
blend signals applied or normalized (see inputs below) to the A and B inputs.
This control is also used as an when control voltage (CV) is applied to the X-FADE input.oset
BLENDER is a four channel mixer and voltage controlled cross-fader. BLENDER simplies mixing
audio and control voltages (CV) by incorporating a single control to blend two signals at a time -
also known as a cross-fader. Two manual cross-faders and a single voltage controlled master
cross-fader are provided. Use BLENDER as a main mixer or as a dynamic control for creating
complex control voltages and waveforms from your signal generators.
X-FADE CV INPUT
This input is for the A/B CROSS-FADER with bipolar or unipolar control modulating
voltages.
Use the X-FADE control to tailor the . Center position is sucient oset of modulation
for symmetrical fading between A and B with a bipolar signal.
CHANNEL (A) LED
Indicates amplitude of the signal applied to channel A.
CHANNEL (B) LED
Indicates amplitude of the signal applied to channel B.
OUTPUT 1-2
This is the for signals processed through INPUTS 1-2 and direct output
BLEND 1-2 control
INPUTS 1 & 2 (A)
These are the signal inputs associated with the BLEND 1-2 control. Signals applied here
are processed through the BLEND 1-2 control and sent to the OUT 1-2 jack. Signals
mixed through these inputs are also normalized to FADE input A.
OUTPUT 3-4
This is the for signals processed through INPUTS 3-4 and direct output
BLEND 3-4 control
OUT
PANEL CONTROL
LED INDICATOR
INPUT
OUTPUT
COLOR KEY LEGEND
B3-4
XCV
IN1-2
(A)
IN3-4
(B)
FADE
A-B
3-4
OUT
1-2
OUT
IN1-2
(A)
INPUTS 3 & 4 (B)
These are the signal inputs associated with the BLEND 3-4 control. Signals applied here
are processed through the BLEND 3-4 control and sent to the OUT 3-4 jack. Signals
mixed through at these inputs are also normalized to FADE input B.
IN3-4
(B)
FADE A-B INPUTS
These are the DC coupled signal inputs associated with the X-FADE control and X-FADE
control voltage (CV) input. Signals applied here are processed through the voltage
controlled cross-fader and sent to the OUT A/B jack. When nothing is applied to these
inputs, the signals from inputs 1-2 are normalized to the A input 3-4 are normalized and
to the B input. Therefore, these normalizations serve to cross-fade the blended signals
from the 1-2 & 3-4 inputs by default.
Patching a signal into either A or B input will break the normalization associated with
that input, respectively and process the patched signal through the voltage controlled
cross-fader.
FADE
A-B
1-2
OUT
3-4
OUT
A/B
OUT OUTPUT A/B
This is the for signals processed through INPUTS direct and main output
A-B and processed by X-FADE CV and X-FADE BLEND control.
IN 1
IN 2
IN 3
IN 4
OUT
1-2
OUT
3-4
X-FADE
CV
IN A
IN B
OUT
A/B
BLEND 1-2
BLEND 3-4
X-FADE
SIGNAL PATH DIAGRAM
Product specificaties
| Merk: | WMD |
| Categorie: | Niet gecategoriseerd |
| Model: | Blender |
Heb je hulp nodig?
Als je hulp nodig hebt met WMD Blender stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd WMD
1 Maart 2024
9 Juli 2023
9 Juli 2023
9 Juli 2023
9 Juli 2023
9 Juli 2023
8 Juli 2023
8 Juli 2023
8 Juli 2023
7 Juli 2023
Handleiding Niet gecategoriseerd
- Bestar
- Draytek
- U-Line
- Somfy
- Lynx
- Laine
- ESUN
- Lightspeed
- Chenbro Micom
- AGM
- Noris
- Nedis
- Videotec
- Nerf
- SumUp
Nieuwste handleidingen voor Niet gecategoriseerd
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025