Winix XQ Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Winix XQ (13 pagina's) in de categorie Luchtreinigers. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/13
1
4
2
5
3
6
WHERE TO USE
MODEL PART DIAGRAM
12~18 in 12~18 in
Allow 12 ~ 18 in. of space between TVs, radios, and other electronics
Electromagnetic interference from certain electronics may cause
product malfunction.
Place indoors away from direct sunlight
Direct exposure may cause product malfunction or failure.
Only place on hard, flat surfaces
Flimsy or slanted surfaces may result in abnormal noise and vibrations.
Allow at least 12 ~ 18 in. from walls for maximum air flow
DISPLAY
01
06
07 08
02 03 04 05
01. Child Lock Indicator
LED light indicates whether Child Lock mode is enabled or disabled.
02. Timer Indicator
If the timer has been set, the LED light indicates the set time of operation.
03. Wi-Fi Indicator
Indicates whether Wi-Fi Mode is enabled or disabled.
04. Sleep Mode Indicator
Indicates whether Sleep Mode is enabled or disabled.
05. Filter Replacement Indicator
LED light indicates when it is time to change the filter.
06. Ultrafine Dust Density Indicator
• The LED Ultrafine Dust Density Indicator displays the quality of air in your environment. When the unit senses an air
quality change, it automatically adjusts the LED Indicator to display the respective air quality.
• LED Numeric Particle Sensor displays air quality measures fine particles down to 2.5 microns.
07. Mode Indicator
Indicates whether Auto & Fan Speed Mode is enabled or disabled.
08. PlasmaWave 2.0 Indicator
Indicates whether PlasmaWave 2.0 is enabled or disabled.
CONTROL PANEL
01. Wi-Fi / Pairing Button
• A quick press will turn Wi-Fi on/off.
• A long press of 3 seconds will activate pairing mode.
• A Wi-Fi indicator will display on the front while Wi-Fi is active.
02. Filter Life / Filter Reset Button
• A quick press will show the remaining filter life;
indicated on the front display (100 ~ 0%).
• A long press of 10 seconds will reset the filter life indicator.
- Use when replacing the filters.
- Filter Reset Button can be used when the power is turned off.
- The filter life will be reset to 100%.
03. Sleep Mode / Child Lock Button
• A quick press of the Sleep Mode / Child Lock Button cycles
the unit in order from Sleep Mode → General Mode → Sleep Mode.
• In Sleep Mode, the Sleep Mode LED icon on the front indicator
dims to 50% brightness. All other LEDs are turned off.
• If you press Sleep Mode / Child Lock Button for 3 seconds,
Child Lock will be initiated and the buttons will not operate.
A chime will sound if pressed.
04. PlasmaWave 2.0 Operation Button
• Turns the PlasmaWave 2.0 feature on/off.
• When the unit is running, you may hear a chirping or buzzing
sound.
The sound is from large particles passing through PlasmaWave
2.0, it is normal and does not signify product failure.
05. Timer Button
• A quick press of the Timer Button will set the timer.
• The timer can be set in hours,
in the order of 0(default) → 1 → 2 → 4
→ 8 → 12 → 0.
• The amount of time, in hours, is indicated on the front numeric
display.
• Timer Indicator displays when timer is in use.
06. Fan Speed Button
• Enables manual operation of the unit's fan speeds.
• Press to cycle through and set the desired fan speed (Auto, Low,
Medium, High, Turbo).
• Auto Mode:
- Auto Mode automatically adjusts fan speeds according to your
indoor air quality. The fan speed will adjust to low when air
quality is good, medium when fair, and to high when poor.
07. Power Button
• Turns the unit on or off.
• During the first 30 seconds of powering up, the Air Quality
Indicator will cycle through Blue, Amber and Red colors. Odor
Sensor takes approximately 4 minutes to detect the air quality in
the environment before normal operation begins.
When to Replace Filters
Fi lter Indi cator Li ght When to S ervice When to R eplace
Pre-Filter
none Clean once every 14 days Permanent
CD Carbon Filter
Can NOT be WASHED
Replace every 12 months
True HEPA Filter
Lasts up to 12 months
• When the Check Filter Indicator LED is on, it is time to replace the True HEPA Filter and CD Carbon Filter.
• Intervals between filter replacement may vary depending on environment.
MAINTENANCE
03 True HEPA Filter 04 PlasmaWave 2.0
02 CD Carbon FilterPre-Filter
01
4-STAGE AIR PURIFICATION
01. Pre-Filter
Designed to catch larger airborne particles found
indoors.
02. Coated Deodorization (CD) Carbon Filter
Reduces VOCs and household odors from cooking,
pets, and smoke.
03. True HEPA Filter
Captures 99.97%* of airborne allergens including;
pollen, mold spores, dust, pet dander, microbes, and
smoke. (*Particles as small as 0.3 microns in size.)
04. PlasmaWave 2.0
Creates Hydroxyls which can help to reduce the
presence of airborne Bacteria and Viruses.*
(*Based on independent laboratory test conducted
on Influenza A Virus (H1N1), Cat Calicivirus (Feline
Calicivirus), Dog Coronavirus (Canine Coronavirus),
Highly Pathogenic Avian Influenza (H5N1_Influenza
A subtype), Avian Influenza (H7N9_Avian Influenza),
Human Coronavirus 229E, Zika Virus, E. coli,
Pseudomonas aeruginosa, Staphylococcus aureus,
VOC.)
INITIAL OPERATION
Latch
1. Remove the front/rear panel by grasping its upper
edge and gently pulling forward.
- To remove the front/rear panel, release the latch
at the lower edge of the panel.
2. Remove the Pre-Filter, then the plastic bag of
filters behind it.
3. Remove filters from protective plastic bag.
02
01
03
4. Install the filters until they fit securely in place.
03. True HEPA Filter (back)
02. CD Carbon Filter (middle)
01. Pre-Filter (front)
Latch
5. After filters are installed, close the front panel.
6. Insert the power cord into an electrical outlet.
REPLACING FILTERS
CLEANING CARE
Cleaning the Filters:
Use a vacuum cleaner or soft brush to clean the Pre-Filter
• If it is excessively soiled, rinse in room temperature water.
• Do not use detergent or soap.
• Allow the filter to dry for 24 hours or more before
using.
• Intervals between filter cleaning may vary depending
on the air quality in the environment .
Cotton
swab
Lens
01 02 03 04 05 06 07
CONTROLS
After replacing the filters, turn the power
on and press and hold the Filter Reset
Button tor 10 seconds.
1. Grasp the back of the grill and lift up.
2. Wipe the interior and grill with a soft, damp
cloth.
3. To reinstall the grill, insert the two front
tabs of the grill into the corresponding
holes in the product.
* For optimal performance, clean every 1 - 2 months.
N O T I C E
• When cleaning the unit, always unplug the power cord first and
then wait until the unit has cooled down.
• Never disassemble, repair, or modify this unit yourself.
• Do not use flammable sprays or liquid detergents.
• Do not allow children to clean or maintain the unit.
• Before cleaning or maintaining, ensure unit is unplugged.
1. Open the front panel and clean the interior with a vacuum
cleaner.
• A handheld vacuum or hose attachment will work best.
2. Dampen a cloth with room temperature water and wipe
down the interior and exterior of the unit.
3. Wipe the unit down with a clean, dry cloth.
• Ensure no moisture remains before plugging the unit back in.
1. Use a damp cotton swab to wipe
the lens and intake area of the
Dust Sensor.
• To clean the sensor area, use
only water. Do not use volatile
substances such as alcohol or
acetone.
2. Wipe away any remaining moisture with a dry
cotton swab.
Grill
Button Control Section
Display
CD Carbon Filter
Rear Panel
Side Vent
Pre-Filter
Front Panel
True HEPA Filter
Air Quality Indicator
(2) Pre-Filter
(2) CD Carbon Filters
(2) True HEPA Filters
Unit
User
Manual
Tow er XQ
Wi-Fi Setup Guide
Cleaning the Dust Sensor: Cleaning the Top:
Cleaning the Exterior & Interior:
N O T I C E
• Do not use benzene, alcohol, or other volatile fluids, which
may cause damage or discoloration.
• Do not use hot water over 104℉.
7
9
8
10
U Man lser ua
• The product warranty is printed on the back of this guide.
• This product is manufactured for use only in North America.
• This product is suitable for 120V only.
Tower XQModel
Use & Care
Guide
• Dedicated Call Center: ☎ (877) 699-4649
• Website: www.winixamerica.com
Contact Winix for
product related inquiries
and customer service
AIR PURIFIER
2610-0255-00 Rev.03
To expedite service, please specify the model name and number, the nature of the problem, your
contact information, and your address.
UNIT SPECIFICATIONS
SAFETY INSTRUCTIONS
Thank you for purchasing a Winix air purifier. This product is for household use only.
• Do not repair or modify the unit yourself.
• All repairs should be completed by a qualified Winix
technician.
• The plug for this unit is polarized with one blade wider
than the other. Do not force the plug into an electrical
outlet. Do not alter the plug in any way. If the plug does
not fit into the outlet, reverse the plug. If it still does
not fit, contact a qualified technician to install a proper
outlet.
• Do not use if the power cord or plug is damaged or the
connection to the wall outlet is loose.
• Use AC 120V only.
• Do not damage, break, forcefully bend, pull, twist, bundle,
coat, pinch, or place heavy objects on the power cord.
• Periodically remove dust from the power plug. This will
reduce the risk of shock due to humidity build up.
• Remove the power plug from the outlet before cleaning
the unit. When removing the power plug, grasp by
holding the plug itself, never hold by the cord.
• If the power plug is damaged, it must be replaced by
the manufacturer or a qualified technician.
• Remove the power plug from the outlet when not in use.
• Do not handle the power plug with wet hands.
• Do not operate the unit when using indoor smoke-
generating insecticides.
• Do not clean unit with benzene or paint thinner.
Do not spray insecticides on the unit.
• Do not use the unit where it is humid or where the unit
may become wet, such as the bathroom.
• Do not insert fingers or foreign objects into air intake or
outlet.
• Do not use the unit near flammable gases. Do not use
near cigarettes, incense, or other spark-creating items.
• Unit will not remove carbon monoxide emitted from
heating appliances or other sources.
IMPORTANT CAUTIONS FOR USING YOUR AIR PURIFIER:
WARNING: Follow the instructions in this manual to reduce the risk of electric shock, short circuit, and/or fire.
IMPORTANT PRECAUTIONS FOR USING YOUR AIR PURIFIER:
• Do not block the intake or outlet vents.
• Do not use near hot objects, such as a stove.
• Do not use where the unit may come into contact with steam.
• Do not use the unit on its side.
• Keep away from products that generate oily residue, such as a deep fryer.
• Do not use detergent to clean the unit.
• Do not operate without a filter.
• Do not wash and reuse the True HEPA Filter or the CD Carbon Filter.
• Hold the handle on the back of the unit to transport.
• Do not hold by the front panel.
Model Nam e Tower XQ
Pow er Vol tage AC120V/60Hz
Pow er Rate 90W
Verified Room Size 698sq.ft.
Dimensions 14.6in(W) × 14.6in(D) × 31.3in(H)
Wei ght 30.86lbs
Replacement Filter Filter X / SKU: 1712-0089-01
The exterior, design, and product specifications may be changed without prior notice to improve product
performance.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions:
• This device may not cause interference.
• This device must accept any interference, including interference that may cause undesired operation of the device.
"In French: Cet appareil contient des émetteurs/récepteurs exemptés de licence et conformes aux normes Innovation,
Science et Economic. RSS(s) sans licence de Développement Canada. Le fonctionnement est soumis aux deux
conditions suivantes:
• cet appareil ne doit pas causer d’interférences nuisibles, et
• cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant provoquer un fonctionnement
non souhaité."
Before operating this equipment, carefully read and
follow these safety cautions.
Ensure filters are inserted before running unit.
Running the unit without filters can shorten the
lifespan of the unit and cause electric shock or injury.
Be sure foreign objects are NOT inserted into the
vents on the unit.
Objects can include pins, rods, and coins.
Do not touch any part of the interior of the unit with
wet hands.
The high voltage may cause electric shock.
Ensure unit intake and outlet vents do not become
blocked.
Blockage may lead to increased internal termperatures,
causing product failure and deformation.
Do not use the unit as a step stool or place heavy
objects on the unit.
Personal injury may occur or product failure and
deformation.
W A R N I N G
Follow these instructions to reduce the risk of serious
injury or death and to reduce risk of damaging the
unit.
• If the power cord is damaged, it must be replaced
by a special cord. Reassembly is available from the
manufacturer or its service agent.
• This appliance is not intended for use by a person
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge
of the unit, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that they do not
play with the appliance.
• This unit is not intended to be used to preserve
documents or art conservation.
Do not pull on the power cord when unplugging the
unit.
Do not tie or knot the power cord when unit is in
operation.
If the unit becomes submerged in water, unplug it
and contact customer service.
Do not unplug or move the unit while in operation.
Do not plug additional appliances into the same
outlet or power supply.
Do not touch the plug with wet hands.
Unplug the unit when not in operation for extended
periods of time.
Do not place around heating elements.
Do not use around mist or fumes from industrial oil
or around large quantities of metallic dust.
The cord can become damaged by forcefully
bending, pulling, twisting, bundling, pinching or
placing heavy objects on it.
Do not install in any sort of motor or transport
vehicle (trucks, boats, ships, etc.).
Do not place in an area with excessive amounts of
noxious gases.
Do not place near any flammable materials
(aerosols, fuel, gases etc.).
Do not have the unit facing into wind or drafts.
Do not place below any electrical outlet.
Do not place in excessively humid areas where the
unit may become wet.
Do not place unit closer than 12 inches from the
wall during operation. It may cause condensation
on the wall and the surrounding area.
SAFETY AND CAUTIONS
PRODUCT WARRANTY
The terms of the warranty are as follows:
1. This product is manufactured under stringent
quality control and inspections.
2. The warranty will be voided if product failure is a
result of negligence or misuse by the consumer.
3. A proof of purchase must be presented upon
claiming a Product Warranty.
4. Store the proof of purchase in a safe place or
register your product on winixamerica.com to
upload your proof of purchase.
5. This warranty is valid only in the USA and Canada.
* for more information visit
https://winixamerica.com/terms-and-conditions/
Pr oduct Nam e Air Purifier
Model Nam e Tower XQ
Pur chase Date
War ranty Period Two (2) Years
Place of Pur chase
Place of Pur chase tel.
Customer
Address
Name
Tel.
After purchase, be sure to complete all of the above
information.
The unit does not turn on at all.
• Is the plug securely attached to the outlet?
- Make sure the outlet has power going to it and ensure
the plug is secured.
• Is there a power outage?
- Check to see if other lights and electrical equipment
are working and try again.
The unit doesn’t work in Auto Mode.
• Has Auto Mode been selected?
- Press the Fan Speed button until Auto Mode is
selected.
• Is the sensor blocked or clogged?
- Wipe Smart Sensor with wet cloth, then dry.
It vibrates and makes a lot of noise.
• Is it running on a slanted or uneven surface?
- Move the unit to a hard, flat, even area.
The power plug and outlet feel hot.
• Is the plug securely plugged in?
- Make sure the plug is properly plugged into the outlet.
There is a strange smell.
• Is it being used in a place with a lot of smoke, dust, or
odors?
- Clean the air intakes on either side and clean the
Pre-Filter.
- Replace the CD Carbon Filter and True HEPA Filter.
The fan strength is weak. The unit is not purifying the air.
• Is the Check Filter Indicator light on?
- Change the filters as required.
The display panel is dim/off.
• Is Sleep Mode on?
- Check the display and press the Sleep Mode button to cycle
Sleep Mode on/off.
• Is the Light Sensor blocked by debris?
- When Auto Mode is on, Sleep Mode is automatically
activated when the Light Sensor detects that the room is
dark.
FREQUENTLY ASKED QUESTIONS
The energy efficiency of this ENERGY STAR
certified model is measured based on a ratio
between the model’s CADR for smoke and the
electrical energy it consumes, or CADR/Watt.
Product specificaties
| Merk: | Winix |
| Categorie: | Luchtreinigers |
| Model: | XQ |
Heb je hulp nodig?
Als je hulp nodig hebt met Winix XQ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Luchtreinigers Winix
3 Oktober 2022
Handleiding Luchtreinigers
- Luchtreinigers Philips
- Luchtreinigers Samsung
- Luchtreinigers LG
- Luchtreinigers BEKO
- Luchtreinigers Honeywell
- Luchtreinigers Tefal
- Luchtreinigers Beurer
- Luchtreinigers Boneco
- Luchtreinigers Daitsu
- Luchtreinigers GE
- Luchtreinigers Haverland
- Luchtreinigers Homedics
- Luchtreinigers Klarstein
- Luchtreinigers Sanyo
- Luchtreinigers Sharp
- Luchtreinigers Oster
- Luchtreinigers Heinner
- Luchtreinigers GOTIE
- Luchtreinigers Alen
- Luchtreinigers ElectriQ
- Luchtreinigers Holmes
- Luchtreinigers HTW
- Luchtreinigers TruSense
Nieuwste handleidingen voor Luchtreinigers
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022