Wimberley AP-554 Handleiding

Bekijk gratis de handleiding van Wimberley AP-554 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 32 mensen en kreeg gemiddeld 5.0 sterren uit 2 reviews. Heb je een vraag over Wimberley AP-554 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Installation Instructions

About the AP-554

Package Contents:

• Arca-Swiss Style QR Plate: AP-554 Replacement Foot (Qty 1)

• Mounting Screws: M3 x 12mm Socket Head Cap Screw (Qty 4)

• Safety Stop Screws:M3 x 6mm Socket Head Cap Screw (Qty 2)

• Hex Key:2.5mm T-Handle (Qty 1)

• Hex Key:2.5mm (Qty 1)

Weight: 5.9 oz

Product Dimensions (L x W x H): 5.5” x 1.7” x 1.9”

Materials: Anodized 6061 Aluminum, Stainless Steel

Instructions continued on back >>

Wimberley,Inc.Phone:1-434-529-8385

1750BroadwayStToll Free:1-888-665-2746(USA&Canada)

Charlottesville, VA

22902USAwww.tripodhead.cominfo@tripodhead.com

1. Remove the factory foot from the lens. Use the en-

closed hex key to remove all four small mounting screws on

the underside of the lens foot (Fig. 1).

2. Attach the AP-554 plate to the lens using the four

enclosed M3 x 12mm screws (Fig. 2).

3. Drive the screw in until you first meet resistance,

then turn it about 30° farther to establish appropriate, but

not excessive, torque. Do not over tighten; it is possible to

shear the head off the fastener with the hex key included.

4.Install safety stop screws as shown on page 2 (Fig.

3). Safety stop screws are not required, however they

keep your lens and camera secure when using a compati-

ble QR clamp (see note on page 2).

Wimberley, Inc.Phone: 1-434-529-8385

1750 Broadway StToll Free:1-888-665-2746 (USA & Canada)

Charlottesville, VA

22902 USAwww.tripodhead.cominfo@tripodhead.com

5 Year Warranty –See www.tripodhead.com/warranty.cfm for complete details

Made in USA

The AP-554 Replacement Foot fits a variety of Nikon

lenses and serves three main purposes:

1.Added Stiffness over the factory tripod mounting foot

connected to a lens plate, reducing flex and vibration.

2.Functions as the Arca-Swiss style quick-release plate

for your lens.

3.Creates a more ideal geometry for using your lens on

the Wimberley Sidemount Head and Sidekick, allowing

the lens to balance optimally.

Wimberley lens plates are compatible with Arca-Swiss style

quick-release clamps such as those made by Wimberley,

Kirk Enterprises, Really Right Stuff, Arca-Swiss, Markins,

and others.

Figure 1

Remove all 4 mounting

screws on lens foot

Figure 2

AP-554

Quick-release Replacement

Foot for Nikon:

200-400 VR & VR II

300 f/2.8 VR & VR II

500 f/4 AF-S I & II, VR & VR II

Product specificaties