WilTec AS196 Handleiding

WilTec Compressor AS196

Lees hieronder de 📖 handleiding in het Nederlandse voor WilTec AS196 (10 pagina's) in de categorie Compressor. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10

User’s manual

Airbrush Compressor AS196

34209

Illustration similar, may vary depending on model

Please read and follow the operating instructions and safety information prior to initial operation.

Technical changes reserved!

Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further

developments.

https://www.XPOtool.com Item 34209 Page 2

The Tool Experts

10 2022-1

The information contained in this document may alter at any time without prior notice. No part of this

WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-

ual, nor in the diagrams and illustrations shown.

Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating

manual is complete, accurate, and up- -date, errors cannot be ruled out entirely.to

If you have found an error or wish to suggest an improvement, we look forward to hearing from you.

Send us an e-mail to:

service@wiltec.info

or use our contact form:

https://www.wiltec.de/contacts/

The most recent version of this manual in several languages can be found in our online shop:

https://www.wiltec.de/docsearch

Our postal address is:

WilTec Wildanger Technik GmbH

Königsbenden 12

52249 Eschweiler Germany

To return your goods for exchange, repair, or other purposes, please use the following address. Atten-

tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team

before returning your goods.

Retourenabteilung

WilTec Wildanger Technik GmbH

Königsbenden 28

52249 Eschweiler Germany

E-mail: service@wiltec.info

Tel: +49 2403 55592–0

Fax: +49 2403 55592–15

https://www.XPOtool.com Item 34209 Page 3

The Tool Experts

10 2022-1

Introduction

Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to

always take some basic safety precautions when using this product. Please read this operating manual

carefully and make sure that you understand it.

Keep these operation instructions in a safe place.

Safety instructions

Caution!

• The use of this device is only allowed with a fault current protection switch with a triggering

nominal current up to (according to VDE 0100 Article 702 and 738).30 mA

• The device is not intended for use by persons (including children) with impaired or limited phys-

ical, sensory, and mental abilities or lack of experience and/or real knowledge, unless they are

supervised by a person responsible for their safety or follow the instructions made by this person

on how to correctly use the device.

• Children should be supervised to ensure that they do not play with the device.

Attention!

• The compressor head can become very hot. Burning hazard!

• Perform a visual inspection of the device before every use. Do not use the device if the safety

appliances are damaged or worn out. Never override safety regulations.

• Only use the device accordingly to the intended purpose stated in this manual.

• You are responsible for the safety of the working zone.

• If the cable or the plug is damaged due to external influences, the cable must not be repaired,

but must be replaced with a new one. This work may only be carried out by an electrician.

• The voltage of 230 V AC indicated on the nameplate of the device must match the existent

mains voltage.

• Never lift, transport, or suspend the device by its power cord.

• Make sure that the electrical plug connection is protected from flood and moisture.

• Before any maintenance work or adjustment, pull out the plug.

• The user is responsible for complying with local safety and mounting regulations. Ask an elec-

trician if you have questions.

• In case of device failure, repairs can only be carried out by an electrician.

Notes!

• Choose the right compressor with the appropriate air volume and air pressure to match the

actual work requirements.

• Never expose the device to dust, acid, steam, explosive or flammable gases, or weather influ-

ences (rain, sun, fog, snow).

• The vacuum pump can only be operated in an appropriate environment (good ventilation, am-

bient temperature +5 –+40 ℃ ℃).

• Never use the compressor barefoot or with wet hands or feet.

• Never allow children to touch the switched-on compressor or to insert the plug. It may cause

burns or electric shocks.

• Do not open or damage any part of the compressor. If necessary, contact a qualified person.

• By opening the drain valve, the water can be evacuated. Always release the water before not

using the compressor for a long time. Store the compressor in a well-ventilated place.

• Always wear protective goggles. Under no circumstances should you direct the airflow towards

your body or other persons’ bodies or animals.

• Never use the compressor in areas with vapours or humidity or near bodies of water.

• Switch off the compressor if you do not use it. Disconnect from mains before you repair, recon-

dition, maintain, clean, or replace parts. Never use the power cable as handle. Keep the cable

Product specificaties

Merk:	WilTec
Categorie:	Compressor
Model:	AS196
Kleur van het product:	Black, Stainless steel
Gewicht:	7000 g
Breedte:	135 mm
Diepte:	350 mm
Hoogte:	320 mm
Geluidsniveau:	45 dB
Gewicht verpakking:	7300 g
Breedte verpakking:	155 mm
Diepte verpakking:	330 mm
Hoogte verpakking:	370 mm
Motor vermogen:	190 W
Stroombron:	AC
Aan/uitschakelaar:	Ja
Automatisch uitschakelen:	Ja
Geschikt voor:	Airbrush
Aantal per verpakking:	1 stuk(s)
Minimum luchtstroom:	30 l/min
Maximum luchtstroom:	35 l/min
Maximum werkdruk:	6 bar
Zwenkwieltjes:	Nee
Opnamecapaciteit:	35 l/min
Inhoud van luchttank:	3 l
Pomp motor snelheid:	1450 RPM
Aantal cilinders:	2
Pomp motor snelheid (max):	1700 RPM