WilTec 63346 Handleiding


Bekijk gratis de handleiding van WilTec 63346 (14 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.7 sterren uit 2.5 reviews. Heb je een vraag over WilTec 63346 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/14
User’s manual
Sand Filter
63342, 63343, 63344, 63345, 63346, 63347
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
© by WilTec Wildanger Technik GmbH Item 63342, 63343, 63344, 63345, 63346, 63347 Page 2
http://www.WilTec.de
http://www.aoyue.eu 06 2023-1
http://www.teichtip.de
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate, and up- -date, errors cannot be ruled out entirely.to
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
To return your goods for exchange, repair, or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team
before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
© by WilTec Wildanger Technik GmbH Item 63342, 63343, 63344, 63345, 63346, 63347 Page 3
http://www.WilTec.de
http://www.aoyue.eu 06 2023-1
http://www.teichtip.de
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
CAUTION:
In and near standing water, garden ponds, and swimming ponds, the use of this device is only allowed
with a fault current protection switch with a triggering nominal current up to (according to VDE 30 mA
0100 Article 702 and 738).
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory, d mental abilities, or lack of experience and/or real knowledge, unless they are supervised an
by a person responsible for their safety or follow the instructions made by this person on how to correctly
use the device. Children should be supervised to ensure that they do not play with the device.
ATTENTION:
Perform a visual inspection of the device before every use. Do not use the device if the safety
appliances are damaged or worn out. Never override safety regulations.
Only use the device accordingly to the intended purpose stated in this manual.
You are responsible for the safety of the working zone.
If the cable or the plug is damaged due to external influences, the cable must not be repaired,
but must be replaced with a new one. This work may only be carried out by an electrician.
The voltage of 230 V AC indicated on the nameplate of the device must match the existent
mains voltage.
Never lift, carry, or fix the device by using the power cable.
Make sure that the electrical plug connection is protected from flood and moisture.
Always unplug the appliance before working on it.
Avoid exposing the device to direct jets of water.
The user is responsible for complying with local safety and mounting regulations. Ask an elec-
trician, if necessary.
The user must take appropriate measures (e.g., installation of an alarm system, a reserve pump,
etc.) to prevent damage caused by the flooding in case of device malfunctioning.
In case of device failure, repairs can only be carried out by an electrician.
The device must never run dry or be operated with its suction line fully closed. The manufac-
turer’s warranty is void for damage to the device caused by dry running.
This device must not be integrated into any kind of domestic water circuit meant for potable
water.
The device is only installed outside the water.
The minimum distance between the device and the pond is 2 m.
It must be ensured that the device cannot fall into the water.
Install the device so that it is not exposed to direct sunlight and that it cannot be used as access
to the pool by children.
The device is to be mounted horizontally on a appropriate mounting spot by the use of screws.
The universal-hose stepped tails can be shortened according to the hose diameter if necessary.
Fix the hoses using hose clamps.
Before working on the filter, purge the air. To do so, press down the control valve lever.
Important note: Repeat this step whenever you will re-commission the pump after wintering,
maintenance, and backwashing.
The device must only be used for the operation of storable pools, never for the operation of
permanently installed pools. Storable pools are those being disassembling for storing and re-


Product specificaties

Merk: WilTec
Categorie: Niet gecategoriseerd
Model: 63346

Heb je hulp nodig?

Als je hulp nodig hebt met WilTec 63346 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd WilTec

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd