Williams Sound CHG 3512 Handleiding
Williams Sound
Niet gecategoriseerd
CHG 3512
Bekijk gratis de handleiding van Williams Sound CHG 3512 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.1 sterren uit 2 reviews. Heb je een vraag over Williams Sound CHG 3512 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
CHG 3512, CHG 3512 PRO
Multiple-Unit Body-Pack Battery Charger
Manual and User Guide
CHG 3512: Charger
CHG 3512 PRO: Charger in case
Receiver Models PPA R38, PPA R37-8, PPA R37, WIR RX22-4
Transmitter Model T46
CHG 3512
CHG 3512 PRO
MAN 116N
Multiple-Unit Body-Pack Battery Charger
CHG 3512 Multiple Battery Charger
Figure 1:
RECEIVER OR
TRANSMITTER
CHARGING
INDICATOR
CHG 3512
REAR VIEW
DC POWER
WARNING: USE THIS CHARGER WITH NiMH RECHARGEABLE BATTERIES ONLY! Non-rechargeable batteries, such as alkaline
and carbon zinc, may heat up and burst, causing possible injury and damage to the equipment.
Before inserting the RECEIVER OR TRANSMITTER into the charger, be sure each unit has rechargeable NiMH batteries
installed. Check that the Alkaline/NiMH battery switch in the battery compartment of the receiver/transmitter is set to NiMH
(Figure 2).
MODEL CHG 3512 PRO: DO NOT CLOSE THE CASE WHILE THE RECEIVER OR TRANSMITTER UNITS ARE CHARGING!
THE CASE MUST REMAIN OPEN TO ENSURE PROPER VENTILATION WHILE CHARGING.
AA
AA
–
+
+
–
Comp
CH Lock
- + - Gain
AUX
+
2:1
1:1
ALKALINE/
NiMH SWITCH
Instructions:
1. Plug the TFP 037 power supply into the AC wall outlet. Plug the power connector into the rear of the CHG 3512 unit (figure 1).
The CHG 3512 will power on and run a self-test for 20 seconds, stepping through each bay lighting each LED indicator.
2. Insert the receiver or transmitter into the charging slot as illustrated in figure 1 above. The unit(s) must be placed in the
charger facing forward to make contact with charger contacts. A red LED indicator will illuminate when charging has started
(figure 1). The red LED will blink slowly when the batteries are fully charged (indicates the charger is in maintain charge mode).
If the red LED indicator blinks at a fast rate (4 times per second), the batteries in that bay are very low, or a bad cell is present.
The CHG 3512 will attempt to condition the batteries to bring them up to a safe charging level. If successful, the LED indicator will
change from a fast blinking LED to a steady on, and the normal 16 hour charge time will begin. If unsuccessful, and the charging
LED indicator light continues to fast blink after 3 hours, one or both batteries in that bay are bad, and need to be replaced.
• You may charge up to 12 body-pack units per CHG 3512 charger.
• It will take approximately 16 hours to fully charge the batteries when using the Williams AV rechargeable NiMH battery, BAT
026-2.
Figure 2:
2
Multiple-Unit Body-Pack Battery Charger
Troubleshooting
If no LED’s light up:
1. Check that the power supply is plugged into the AC outlet.
2. Check that the Alkaline/NiMH battery switch in the battery compartment of the receiver/transmitter is set to NiMH.
3. Be sure the receiver/transmitter is facing forward in the charger (see Figure 1).
CHG 3512 Multiple Battery Charger Specifications
CHG 3512 (charger only)
Size: 9.5"L x 7.4"W x 1.7"H (24.1 cm L x 18.8 cm W x 4.3 cm H)
Weight: 1.2 lbs (.54 kg), excluding power supply
Color: Black ABS
Power Supply Input: 90 - 240 VAC input
Power Supply: TFP 037 Switching AC adapter, 5 VDC - 4A output
Charging Rate: 16 Hour Charge: 140 mA
Pulse/Maintain: 140 mA
Charging Time: 16 hours nominal*
Unit Capacity: 12 Units
Compatible With: Receivers: PPA R38, PPA R37-8, PPA R37, PPA R35-8 R863, WIR RX22-4, PLR BP1,
Transmitters: PPA T46, PPA T36 T863,
( products are in )legacy italic
Indicators: Individual Charging Indicators: Red LEDs. LEDs blink slowly when charging is complete
Warranty: 1 year (cables and power supply warranted for 90 days)
Approvals: CE, WEEE, RoHS
CHG 3512 PRO (with case)
Size: 15.7"L x 19.7"W x 7.2"H (40 cm L x 50 cm W x 18 cm H)
Weight: 6.6 lbs (2.99 kg)
*Charging specifications are based on Williams AV rechargeable NiMH battery, BAT 026-2.
New batteries have various charge conditions, therefore, some batteries may take more or less time to fully charge.
Charging batteries generates heat. The receivers, transmitters, charger, and power supply will feel warm when charg-
ing. Do not charge batteries in a closed enclosure, such as a carry case or brief case. To ensure full battery charging,
turn o the receiver/transmitter units when recharging the batteries.
Specifications subject to change without notice.
Recycling Instructions
Help Williams AV protect the environment! Please take the time to dispose of your equipment properly.
Product Recycling for Customers in the European Union:
Please do NOT dispose of your Williams AV equipment in the household trash. Please take the equipment to an
electronics recycling center; OR, return the product to the factory for proper disposal.
Battery Recycling for Customers in the European Union:
Please do NOT dispose of used batteries in the household trash. Please take the batteries to a retail or
community collection point for recycling.
3
Product specificaties
| Merk: | Williams Sound |
| Categorie: | Niet gecategoriseerd |
| Model: | CHG 3512 |
Heb je hulp nodig?
Als je hulp nodig hebt met Williams Sound CHG 3512 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Williams Sound
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
2 April 2025
2 April 2025
16 December 2024
Handleiding Niet gecategoriseerd
- Valeton
- Genelec
- Stromer
- Xiaomi
- Palmer
- Fresca
- Tilta
- Veripart
- View Quest
- Crosley
- Vox
- Jenn-Air
- Lowrance
- Hex
- Jamo
Nieuwste handleidingen voor Niet gecategoriseerd
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025