Whirlpool WH6UC11BS7A0X Handleiding
Pagina's 28 Vaatwasser
Bekijk de handleiding van Whirlpool WH6UC11BS7A0X gratis online of download de PDF. 65 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
ENQuick Guide
1
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and on
the machine’s functional components.
• It is mandatory that the salt reservoir never be empty.
• It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher and must be
lled when the SALT REFILL indicator light in the control panel is lit.
1. Remove the lower rack and unscrew the reservoir cap
(anticlockwise).
2. Only the rst time you do this: ll the salt reservoir
with water.
3. Position the funnel (see gure) and ll the salt reservoir
right up to its edge (approximately 1 kg); it is not unu-
sual for a little water to leak out.
4. Remove the funnel and wipe any salt residue away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get into
the container during the wash program (this could damage the water sof-
tener beyond repair).
Whenever you need to add salt, it is mandatory to complete the pro-
cedure before the beginning of the washing cycle to avoid corrosion.
WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently prevent-
ing scale buildup on heater, contributing also to better cleaning eciency.
This system regenerates itself with salt, therefore it is required to rell
salt container when empty.
Frequency of regeneration depends on water hardness level setting - regen-
eration takes place once per 6 Eco cycles with water hardness level set to 3.
Regeneration process starts in nal rinse and nishes in drying phase, be-
fore cycle ends.
• Single regeneration consumes: ~3.5L of water;
• Takes up to 5 additional minutes for the cycle;
• Consumes below 0.005kWh of energy.
A
C
D
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid
dispenser A should be lled when the RINSE AID
REFILL indicator light in the control panel is lit.
NEVER pour the rinse aid directly into the appli-
ance tub.
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device C. Introduce the
detergent into the dry dispenser D only. Place the amount of detergent for
pre-washing directly inside the tub. If all-in-one detergents are used, we
recommend using the TABLET button, because it adjusts the program so
that the best washing and drying results are always achieved.
Usage of detergent not designed for dishwashers may cause malfunc-
tion or damage to the appliance.
Program
Programs description
Drying
phase
NaturalDry
Available options
*)
Duration
of wash
program
(h:min)
**)
Water
con-
sumption
(litres/cycle)
Energy
con-
sumption
(kWh/cycle)
1.
Eco 50°- Program is suitable to clean normally soiled tableware, that for
this use, it is the most ecient programme in terms of its combined en-
ergy and water consumption, and that it is used to assess compliance
with the EU Ecodesign legislation.
3:358.70.63
2.
Intensive65° - Program recommended for heavily soiled crockery, es-
pecially suitable for pans and saucepans.
2:4517.51.60
3.
6
th
Sense® 50-60°- For normally soiled dishes with dried food residues.
Senses the level of soiling on the dishes and adjusts the program ac-
cordingly.
1:20 - 3:007.0 - 14.00.70 - 1.10
4.
Fast Wash&Dry 50°
- Normally soiled crockery. Everyday cycle, that ensu-
res optimal cleaning and drying performance in shorter time.
1:2511.51.10
5.
Crystals45° - Program for delicate items, which are more sensitive to
high temperatures, for example glasses and cups.
1:4012.01.20
6.
Rapid 30’45° - Program to be used for half load of lightly-soiled dishes
with no dried food residues. Without drying.
-
0:309.00.50
7.
Silent
50° - Suitable for night-time operation of the appliance. With the
lowest noise.
3:3016.01.15
8.
Sanitizing 65° - Normally or heavily soiled crockery, with additional anti-
bacterial wash. Can be used to perform maintenance of the dishwasher.
-
1:5012.01.30
9.
Prewash - Use to refresh crockery planned to be washed later.
No detergent to be used with this program.
--
0:104.50.01
CONTROL PANEL
FIRST TIME USE
More information in the Daily Reference Guide on website.
PROGRAMS TABLE
1. On-O / Reset button with indicator light
2. Program selection button with indicator light
3. Multizone button with indicator light / Keylock
4. Eco program indicator light
5. Keylock indicator light
6. Display
7. Program number and remaining time indicator
8. Tablet (Tab) indicator light
9. Closed water tap indicator light
10. Rinse Aid rell indicator light
11. Salt rell indicator light
12. Power Clean® button with indicator light / Tablet (Tab)
13. Delay button with indicator light
14. Start/Pause button with indicator light / Drain out
3
1
2
8
13
14
5
4
6
71112
9
10
THANK YOU FOR BUYING AWHIRLPOOL PRODUCT.
In order to receive amore complete assistance, please
register your appliance on: www.whirlpool.eu/register
PLEASE SCAN THE
QR CODE ON YOUR
APPLIANCE IN
ORDER TO HAVE
MORE DETAILED
INFORMATION
Before using the appliance carefully read Safety and Installation Instructions.
After installation, please remember to remove all transport protection parts from
the dishwasher.
Foutcodes Whirlpool WH6UC11BS7A0X
Foutcodes uit de officiële handleiding, met betekenis en oplossing.
| Code | Betekenis | Oplossing | Pagina |
|---|---|---|---|
| F15 | De vaatwasser beëindigt de cyclus voortijdig. Zowel de Aan/Uit- als de START/Pauze-leds knipperen snel. Mogelijke oorzaken: afvoerslang te laag geplaatst of hevelwerking naar het huishoudelijke rioleringssysteem; lucht in de watertoevoer. | Controleer of het uiteinde van de afvoerslang op de juiste hoogte is geplaatst (zie INSTALLATIE). Controleer op hevelwerking naar het huishoudelijke rioleringssysteem en installeer indien nodig een beluchtingsventiel. Controleer de watertoevoer op lekken of andere problemen waardoor lucht binnenkomt. | 3 |
| F6 | De vaatwasser vult geen water. Zowel de Aan/Uit- als de START/Pauze-leds knipperen snel. Mogelijke oorzaken: geen water in de watertoevoer of de kraan is dicht; de toevoerslang is geknikt; de zeef in de watertoevoerslang is verstopt en moet worden gereinigd. | Controleer of er water in de watertoevoer is of dat de kraan openstaat. Zorg ervoor dat de toevoerslang niet geknikt is (zie INSTALLATIE), herprogrammeer de vaatwasser en start deze opnieuw op. Schakel na het controleren en reinigen de vaatwasser uit en weer in en start een nieuw programma. | 3 |
Alle foutcodes Whirlpool Vaatwasser
Product specificaties
| Merk: | Whirlpool |
| Categorie: | Vaatwasser |
| Model: | WH6UC11BS7A0X |
Heb je hulp nodig?
Als je hulp nodig hebt met Whirlpool WH6UC11BS7A0X stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Vaatwasser Whirlpool
Whirlpool WIC3C26NUK Handleiding Whirlpool W2F HKD624 Handleiding Whirlpool WH8IA15AM3TU0 Handleiding Whirlpool WH8IB15B2M6L0 Handleiding Whirlpool WH6FA14BN7A0X Handleiding Whirlpool W0I D734A S Handleiding Whirlpool WH3UC10BS7A0X Handleiding Whirlpool WH6IB14BN7S1S Handleiding
Alle Whirlpool Vaatwasser handleidingen
Populair in Vaatwasser
Whirlpool WSIC 3M27 C Handleiding Whirlpool WIO 3O540 PELG Handleiding Whirlpool WIC 3B19 UK N Handleiding
Handleiding Vaatwasser
Nieuwste handleidingen voor Vaatwasser
Electrolux EES48320L Handleiding Electrolux E72LB210S Handleiding Electrolux KEGB3420L Handleiding Electrolux EES48405L Handleiding Electrolux ESS47400SX Handleiding BEKO BRI63491 Handleiding BEKO BDFN26431S Handleiding Indesit IN2IE13CNO8 Handleiding Equator FS 2414 SS Handleiding Siemens SN43HS04TE Handleiding