Whirlpool WH6IB16AM6T0 Handleiding
Pagina's 44 Engels Vaatwasser
Bekijk de handleiding van Whirlpool WH6IB16AM6T0 gratis online of download de PDF. 10 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
EN
Quick Guide
1
THANK YOU FOR BUYING AWHIRLPOOL PRODUCT.
In order to receive amore complete assistance, please
register your appliance on: www.whirlpool.eu/register
SETTING MENU
1. Switch on the appliance by pressing the ON-OFF button.
2. Hold the Settings (Half Load ) button for 3 seconds, until you hear
a beep and the display shows „SEt”.
3. After one second the rst available setting (letter „”) will be displayed.
4. Press PREVIOUS/NEXT to scroll through the list of available settings
(see table below), then press START/Pause to view and change the
value of the currently selected setting.
5. Press PREVIOUS/NEXT to change the value, then press START/Pause
to save the new value or return to the main menu.
6. To change another setting, repeat points 4 and 5.
7. Press ON-OFF or wait 30 seconds to exit the menu.
LETTER
SETTING
VALUES
(Default - in bold)*
Cycle Counter - number of washing cycles
carried out by the dishwasher.
Eg. 25 cycles: 025;
Eg. 13.947 cycles:
13_947
(scrolling
for 3 times)
Water Hardness Level(see “SETTING THE WA-
TER HARDNESS” and “WATER HARDNESS TABLE”)
1 | 2 | 3 | 4 | 5
Rinse Aid Level
(see “ADJUSTING THE DOSAGE OF RINSE AID”)
0 | 1 | 2 | 3 | 4 | 5
NaturalDry(see “OPTIONS AND FUNCTIONS”)
“1” = On, “0” = O
1 | 0
Time on the oor(see “OPTIONS AND FUNCTIONS”)
“1” = On, “0” = O
1 | 0
Sound
“1” = On, “0” = O
1 | 0
Factory Settings - press START/Pause to re-
store to the factory default all the values of the
settings included in the settings menu.
-
*) The default value does not apply to the Cycle Counter.
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on
the dishes and on the machine’s functional components.
The salt reservoir is located in the lower part of the dish-
washer (under the lower rack on the left side).
• It is mandatory that the salt reservoir never be empty.
• It is important to set the water hardness.
• Salt must be lled when the SALT REFILL indicator light on the control
panel is lit.
1. Remove the lower rack and unscrew the reservoir cap (anticlockwise).
2. Position the funnel (see gure) and ll the salt reservoir right up to its
edge (approximately 0,5 kg); it is not unusual for alittle water to leak out.
3. Only the rst time you do this: ll the salt reservoir with water.
4. Remove the funnel and wipe any salt residue away from the opening.
Make sure the cap is screwed on tightly so that no detergent can get into
the container during the wash program (this could damage the water sof-
tener beyond repair).
Run aprogram every time as soon as you completed relling the salt
reservoir to avoid corrosion.
WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently pre-
venting scale buildup on the heater, contributing also to better cleaning ef-
ciency. This system regenerates itself with salt, therefore it is required
to rell the salt container when empty.
The frequency of regeneration depends on the water hardness level setting
- regeneration takes place once per 4-6 Eco cycles with the water hardness
level set to 3. The regeneration process occurs at the beginning of the cycle
with additional fresh water.
• Single regeneration consumes ~3 L of water;
• Takes up to 5 additional minutes for the cycle;
• Consumes below 0.005kWh of energy.
A
B
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid dis-
penser Ashould be lled when the RINSE AID REFILL
indicator light in the control panel is lit.
1. Open the dispenser B by pressing and pulling up
the tab on the lid.
2. Pour in the rinse aid (max. 110 ml), making sure it
does not overow from the dispenser. If this hap-
pens, clean the spill immediately with adry cloth.
3. Press the lid down until you hear aclick to close it.
NEVER pour the rinse aid directly into the appli-
ance tub.
D
C
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening
device C. Introduce the detergent into the dry dis-
penser D only. Place the amount of detergent for
pre-washing directly inside the tub.
1. When measuring out the detergent refer to the
mentioned earlier information to add the proper
quantity. Inside the dispenser D, there are indica-
tions to help the detergent dosing.
2. Remove detergent residues from the edges of the dispenser and close
the cover until it clicks.
3. Close the lid of the detergent dispenser by pulling it up until the closing
device is secured in place.
The detergent dispenser automatically opens up at the right time accord-
ing to the program.
Usage of detergent not designed for dishwashers may cause malfunc-
tion or damage to the appliance.
CONTROL PANEL
PLEASE SCAN THE QR CODE
ON YOUR APPLIANCE IN
ORDER TO HAVE MORE
DETAILED INFORMATION
FIRST TIME USE
More information in the Daily Reference Guide on website.
Before using the appliance carefully read Safety and Installation Instructions.
After installation, please remember to remove all transport protection parts from
the dishwasher.
1. ON-OFF/Reset button with indicator light
2. PREVIOUSprogram button
3. NEXTprogram button
4. FAVOURITEprogram button
with indicator light
5. Salt reservoir empty indicator light
6. Rinse Aid reservoir empty indicator light
7. DESCALE indicator light
8. ClosedWater Tap indicator light
9. Display
10. Program number and remaining time indicator
11. Power Clean Prooption button with indicator light
12. Half Loadoption button with indicator light/ Settings - 3 sec. press
13. Extra Dryoption button with indicator light
14. Delayoption button with indicator light
15. START/Pause button with indicator light
W11553946 panel 2023-01-17
W11572189 button R 2021-10-01
W11572083 button L 2022-02-15
W11569647 display 2023-02-17
12345678910
111213
14
15
P
3 sec.
21
65°
345678910
50°
Eco
65°
A
55°
A
50°
A
45°
65°
SELF CLEAN
DISPLAY ON THE FLOOR
1
3
2
1. Delay Time on the oor - indicator of the time
left to the start of the cycle, when the Delay
option is set
2. Saltreservoir empty - indicator light on the
oor
3. Remaining Time on the oor - indicator of the
time left to the end of the cycle
Alle foutcodes Whirlpool Vaatwasser 33 foutcodes uit 78 handleidingen, met hun betekenis.
Product specificaties
| Merk: | Whirlpool |
| Categorie: | Vaatwasser |
| Model: | WH6IB16AM6T0 |
Heb je hulp nodig?
Als je hulp nodig hebt met Whirlpool WH6IB16AM6T0 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Vaatwasser Whirlpool
Whirlpool WIP 4T233 PFEG Handleiding Whirlpool WH7FA14BN7A0X Handleiding Whirlpool WH6FB10BS7A0X Handleiding Whirlpool WH3ID10BS7SA0 Handleiding Whirlpool WH6IC16B4M6T0 Handleiding Whirlpool WH8IA15AM3TUS0 Handleiding Whirlpool WH7IA15AM3TUS0 Handleiding Whirlpool WH8IC15B4M6LHC0 Handleiding
Alle Whirlpool Vaatwasser handleidingen
Populair in Vaatwasser
Whirlpool WSIC 3M27 C Handleiding Whirlpool WIO 3O540 PELG Handleiding Whirlpool WIC 3B19 UK N Handleiding
Handleiding Vaatwasser
Nieuwste handleidingen voor Vaatwasser
Midea MDWEB1014K Handleiding Sauber SERIE 5-DW45106XMI Handleiding Miele G 7130 SCU AutoDos Handleiding Fisher Paykel DD60ST4I2 Handleiding Fisher Paykel DD60S4HI2 Handleiding Fisher Paykel DD24ST2CX2 Handleiding Fisher Paykel DD24DT4PX2 Handleiding Fisher Paykel DD24DT4I2 Handleiding Fisher Paykel DD60D2NX2 Handleiding Blomberg LDF53400 Handleiding