Whirlpool UW8 F2C XLSB UK 2 Handleiding

Whirlpool Vriezer UW8 F2C XLSB UK 2

Lees hieronder de 📖 handleiding in het Nederlandse voor Whirlpool UW8 F2C XLSB UK 2 (30 pagina's) in de categorie Vriezer. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/30
EN
Quick guide
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance, please
register your product on www . whirlpool . eu/ register
Before using the appliance carefully read the Safety
Instruction.
PRODUCT DESCRIPTION
FIRST TIME USE
Wait at least two hours, after the installation, before connecting the
appliance to the power supply.
Connect the appliance to the power supply and turn the thermostat
knob to switch on the appliance.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally lled
appliance. Position the antibacterial anti-odour lter in the fan as
demonstrated in the lter packaging (if available).
CONTROL PANEL
1. On/Stand By button
2. Temperature display
3. Fast freezer button
4. Stop Alarm button
5. Black out alarm
6. Eco Night function
7. 6th Sense Freeze control indicator
8. Freezer control indicator
1. 2. 3.
4.5.6.
8.7.
ON/STAND BY BUTTON
To put the product in Stand-by, press and hold for 3 seconds. All
the icons turn o except On/Standby indicator . To reactivate the
appliance press once (briey) this button.
TEMPERATURE SETTING BUTTON
The appliance is normally factory-set for operation at the
recommended temperature of -18°C. The internal temperature can
be adjusted between -16°C and -24°C, proceeding as follows: Press to
change the set point (°C). The storage temperature can be changed
by -1°C with each pressure of the button: the value changes cyclically
between -16°C and -24°C.
FAST FREEZER BUTTON
To activate/deactivate the Fast Freeze function simply press Fast Freeze
button (see the Instructions for Use). The Fast Freeze function switches
o automatically after 50 hours.
STOP ALARM BUTTON
Press in case of alarm.
BLACK OUT ALARM
Long Black-out Alarm indicator (see the Instructions for Use).
ECO NIGHT FUNCTION (NIGHT TIME RATE)
Press to activate/deactivate the Eco Night function. The Eco Night
function enables appliance energy consumption to be concentrated in
the reduced rate hours, generally at night (see the Instructions for Use).
6TH SENSE FREEZE CONTROL INDICATOR
6th
Sense Freeze Control is an advanced technology that reduces
freeze burns and food preserves its original quality and color.
FREEZER CONTROL BUTTON
Freeze Control is an advanced technology that reduces temperature
uctuations in the whole freezer compartment to minimum. To
activate/deactivate the Freeze Control function press for 3 seconds
the FREEZE CONTROL button. If the function is engaged and the user
modify the freezer temperature out of the working range, the function
is automatically switched o. In case of Fast freezing is engaged, the
function “Freeze control” is inhibited until the Fast Freezing function
switched o (see the Instructions for Use).
FREEZER COMPARTMENT AND FOOD STORAGE
Legend
FREEZER ZONE
All food items
TROUBLESHOOTING
What to do if... Possible reasons Solutions
The appliance doesn’t work. There may be an appliance power
supply problem.
Make sure:
• there is not a power failure;
• the plug is properly inserted in the power socket and the double-
pole switch (if present) is in the correct position (on);
• the household electrical system protection devices function;
• the power cable is not broken.
The inside light does not
work.
It may be necessary to replace the light
bulb.
Disconnect the appliance from the power supply and contact the
Technical Assistance Service if you need a replacement.
The internal temperature
of the compartments is not
cold enough.
The reasons could vary (see “Solution”)
column.
Check that:
• the doors are closed properly;
• the appliance is not installed near a heat source;
• the temperature is appropriately set;
• the circulation of air through the ventilation grilles on the base of
the appliance is not obstructed.
There is water on the
bottom of the refrigerator
compartment.
The defrost water drain is blocked. Clean the defrosting water drain (see section “Cleaning and
Maintenance").
Excessive amount of frost in
the freezer compartment.
The door to the freezer compartment is
not closed properly.
• Check that there is nothing preventing the door from closing
properly.
• Defrost the freezer compartment.
• Make sure the appliance has been correctly installed.
The front edge of the
appliance that the door
gaskets seal against is hot.
This is not a problem. It prevents
condensation from forming.
A solution is not needed.
The temperature of the
refrigerator compartment is
too cold.
• The set temperature is too cold.
• A large amount of fresh food may
have been placed in the freezer
compartment.
• Try to set a less cold temperature.
• If fresh food has been put in the freezer compartment, wait until
the freezing has been completed.
• Turn o the fan (if present) described in the paragraph “FAN”.
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
• Visiting our website docs . whirlpool . eu
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product's identication
plate.
CS
Stručný návod k obsluze
DĚKUJEME, ŽE JSTE SI ZAKOUPILI VÝROBEK
WHIRLPOOL
Přejete-li si získat plnou podporu, zaregistrujte svůj
výrobek na www . whirlpool . eu/ register
Před použitím spotřebiče si pečlivě přečtěte Bezpečnostní
pokyny.
POPIS VÝROBKU
PRVNÍ POUŽITÍ
Po provedení instalace vyčkejte alespoň dvě hodiny, než připojíte
spotřebič ke zdroji napájení.
Připojte spotřebič ke zdroji napájení aotočte ovladačem termostatu,
aby se spotřebič zapnul.
Po zapnutí spotřebiče musíte vyčkat 4−6hodin, než dojde kdosažení
správné skladovací teploty. Platí pro obvyklé naplnění. Podle instrukcí
na obalu umístěte antibakteriální ltr proti zápachu do ventilátoru (je-li
kdispozici).
OVLÁDACÍ PANEL
1. Tlačítko „Zapnuto/Pohotovostní režim“
2. Ukazatel teploty
3. Tlačítko „Rychlé mražení“
4. Tlačítko „Zastavení alarmu“
5. Alarm při výpadku proudu
6. Funkce ECO NIGHT
7. Kontrolka funkce „6th Sense – řízení
mražení“
8. Kontrolka „Řízení mražení“
1. 2. 3.
4.5.6.
8.7.
TLAČÍTKO „ZAPNUTO/POHOTOVOSTNÍ REŽIM“
Kuvedení spotřebiče do pohotovostního režimu Standby podržte tlačítko
stisknuté po dobu 3sekund. Všechny ikony zhasnou svýjimkou kontrolky
režimu On/Standby . Kopětovné aktivaci spotřebiče tlačítko znovu
(krátce) stiskněte.
TLAČÍTKO NASTAVENÍ TEPLOTY
Spotřebič je standardně již zvýroby nastaven na doporučenou teplotu
−18°C. Vnitřní teplotu lze regulovat vrozmezí od −16°C do −24°C; postup
je následující: Stiskněte pro změnu nastavené hodnoty (°C). Skladovací
teplotu snížíte každým stisknutím tlačítka o−1°C: hodnota cyklicky
přechází mezi −16°C a−24°C.
TLAČÍTKO „RYCHLÉ MRAŽENÍ“
Za účelem aktivace/deaktivace funkce rychlého mražení jednoduše
stiskněte tlačítko RYCHLÉHO MRAŽENÍ (viz Návod kpoužití). Funkce
Rychlého mražení se automaticky vypne přibližně po 50hodinách.
TLAČÍTKO „ZASTAVENÍ ALARMU“
Stiskněte vpřípadě poplachu.
ALARM PŘI VÝPADKU PROUDU
Kontrolka alarmu při dlouhém výpadku proudu (viz návod kpoužití).
ÚSPORNÁ FUNKCE „ECO NIGHT“ (NOČNÍ PROVOZ)
Stiskněte pro aktivaci/deaktivaci funkce Eco Night. Funkce Eco Night
umožňuje koncentrovat spotřebu energie spotřebiče do doby se sníženou
sazbou, tedy obvykle na noc (viz Návod kpoužití).
KONTROLKA FUNKCE „6TH SENSE – ŘÍZENÍ MRAŽENÍ“
Funkce „6th Sense – řízení mražení“ je výsledkem vyspělé
technologie, která omezuje výskyt případů spálení mrazem, ajídlo si
tak uchovává svoji původní kvalitu abarvu.
TLAČÍTKO PRO OVLÁDÁNÍ MRAZNIČKY
Řízení mražení je funkcí vrámci vyspělé technologie, která dokáže
omezit výkyvy teplot vcelém mrazicím oddílu na minimum. Chcete-li
aktivovat/deaktivovat funkci Řízení mražení, stiskněte tlačítko režimu
ŘÍZENÍ MRAŽENÍ apodržte je stisknuté po dobu 3sekund. Je-li tato
funkce zapnuta auživatel změní nastavení teploty vmrazničce tak, že
toto nastavenĂ­ neodpovĂ­dĂĄ danĂŠmu rozmezĂ­ pro sprĂĄvnĂŠ fungovĂĄnĂ­
zařízení, funkce se automaticky deaktivuje. Vpřípadě, že je aktivní funkce
rychlého mražení, funkce kontroly mražení není umožněna, dokud se
funkce rychlého mražení nedeaktivuje (další informace najdete vnávodu
kpoužití).
ODDÍL MRAZNIČKY ASKLADOVÁNÍ POTRAVIN
Vysvětlivky
MRAZICÍ ZÓNA
VeĹĄkerĂŠ potraviny


Product specificaties

Merk: Whirlpool
Categorie: Vriezer
Model: UW8 F2C XLSB UK 2

Heb je hulp nodig?

Als je hulp nodig hebt met Whirlpool UW8 F2C XLSB UK 2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Vriezer Whirlpool

Handleiding Vriezer

Nieuwste handleidingen voor Vriezer