Whirlpool BSNF 8352 W Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Whirlpool BSNF 8352 W (3 pagina's) in de categorie Koel-vries combinaties. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
EN
Quick guide
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order tu receive a more complete assistance, please
register your product on www . whirlpool . eu/ register
Before using the appliance carefully read the Safety
Instruction.
PRODUCT DESCRIPTION
FIRST TIME USE
Wait at least two hours, after the installation, before connecting the
appliance to the power supply.
Connect the appliance to the power supply it starts the operation
automatically. The ideal storage temperatures for the food are preset in
the factory.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally lled
appliance. Position the antibacterial antiodour lter in the fan as
demonstrated in the lter packaging (if available).
CONTROL PANEL
1. On/stand-by indicator
2. Fast cool indicator
3. Freeze control indicator
4. Fridge/freezer temperature display (°C)
5. Stop alarm indicator
6. Fast freeze indicator
7. Black out alarm indicator
8. Fridge temperature button / fast cool
button
9. Freeze control button
10. On/stand-by
11. Stop alarm
12. Freezer temperature button / fast freeze
button
1 2 3 4 5 6 7
811109 12
ON/STANDBY
To put the product in Stand-by, press and hold the On/Stand By button
for 3 seconds. All the indicators turn o except On/Standby indicator.
Press again to reactivate the appliance.
6TH SENSE
This function automatically works to ensure the optimal conditions
to preserve the stored food. The “6th Sense” function is automatically
activated when:
• a large amount of food is loaded into the refrigerator
• the refrigerator door is left open for a long time
• a prolonged power failure takes place, causing the internal
temperature of the appliance to increase to values that cannot
guarantee safe storage of food.
FRIDGE TEMPERATURE
To adjust the Fridge Temperature, press the Fridge °C button. The
Fridge Temperature can be adjusted between +2°C and + 8°C, as
shown by the Fridge Temperature LEDs.
FREEZER TEMPERATURE
To adjust the Freezer Temperature, press the Freezer °C button. The
Freezer Temperature can be adjusted between -16°C and -24°C, as
shown by the Freezer Temperature LEDs.
FAST COOL
Using Fast Cool function it is possible to increase the cooling
capacity in the refrigerator compartment. The use of this function
is recommended when placing a very high quantity of food in the
refrigerator compartment. Press the Fast Cool button to activate Fast
Cool function. When activated, the Fast Cool indicator turns on. The
function is automatically disabled after 6 hours, or can be manually
disabled by pressing Fast Cool button again.
FAST FREEZE
The use of this function is recommended when placing a very high
quantity of food to be frozen in the freezer compartment. 24 hours
before freezing fresh food, press the Freezer button to activate the Fast
Freeze function. When activated, the Fast Freeze indicator turns on.
After 24 hours place the food to be frozen in the middle freezing zone
of freezer compartment. The function is automatically disabled after 48
hours, or can be manually disabled by pressing Fast Freeze button.
FREEZE CONTROL
Freeze Control is an advanced technology that reduces temperature
uctuations in the whole freezer compartment to minimum, thanks to
an innovative air system, totally independent from the fridge. Freeze
burns are reduced up to 60% and food preserves its original quality
and color.
To activate/deactivate the Freeze Control function simply press the
FREEZE CONTROL button. The function works properly in a dened
range of temperature: between -22°C and -24°C. When the function
is engaged and the current temperature in the freezer is set to the
warmer set point than -22°C, the temperature is automatically set
to -22°C to match the working range. If the function is engaged and
the user modify the freezer temperature out of the working range,
the function is automatically switched o. In case of Fast freezing
is engaged, the function “Freeze control” is inhibited until the Fast
Freezing function switched o.
FAN*
The Fan improves temperature distribution inside the refrigerator
compartment, allowing better preservation of stored food. By default,
the fan is switched on. To turn o the fan press the button of fan.
Please note that when the fan is switched on it will not continuously
work. The fan will start/stop working depending on the temperature
and/or humidity level inside the fridge. It is therefore absolutely normal
if the fan does not move even if the fan is switched on. If the appliance
has the Fan it can be equipped with the antibacterial lter. Remove it
from the box placed in the crisper drawer and insert into the fan cover.
The replacement procedure is included in the lter box.
FREEZING FRESH FOOD
Place fresh food to be frozen on the shelf in the freezer compartment,
avoiding direct contact with food that is already frozen. The quantity
of fresh food that can be frozen in 24 hours is written on the rating
plate. To freeze fresh food, place the freezer compartment shelf in the
bottom position.
LED LIGHT
The light system inside the fridge compartment uses LEDs light,
allowing a better lightning as well as very low energy consumption.
If the LED light system does not work, please contact the Service to
replace it.
Important: The refrigerator compartment light switches on when the
refrigerator door is opened. If the door is kept open for more than 8
minutes the light will be automatically switched o.
NOFROST REFRIGERATOR COMPARTMENT
Refrigerator compartment defrosting is completely automatic. Droplets
of water on the rear wall inside the refrigerator compartment indicate
that the automatic defrost phase is in progress.
The defrost water is automatically run into a drain hole and collected in
a container, where it evaporates.
NOFROST FREEZER COMPARTMENT
No Frost freezers provide chilled air circulation around the storage
areas, and prevent the formation of ice, thereby completely eliminating
the need for defrosting.
Frozen items don’t stick to the walls, labeling stays legible and storage
space remains neat and clear.
QUICK ICE
HOW TO MAKE ICE CUBES
Put the empty ice cube trays into the freezer 24 hours before using the
Quick Ice feature to cool them down. To achieve the best performance
of the Quick Ice trays it is recommended to keep them permanently in
the freezer and maintain temperature setting at -18°C or colder.
Remove a Quick Ice tray by pulling it towards you.
Remove the cover and ll the tray with potable water (maximum level =
2/3 of the overall capacity of the tray).
Insert the cover back into the tray and insert it back into the dedicated
slots in the top freezer drawer.
Take care not to spill water.
Wait at least 30 minutes until the ice cubes are formed (this time can be
slightly longer if the trays are used immediately after the rst use).
HOW TO TAKE ICE CUBES
When ice is ready please open the cover and remove cubes.
HOW TO STORE FRESH FOOD AND BEVERAGE
Legend
TEMPERATE ZONE
Suggested for the storage of tropical fruit, cans, drinks,
eggs, sauces, pickles, butter, jam
COOL ZONE
Suggested for storage of cheese, milk, daily food,
delicatessen, yogurt
COOLEST ZONE
Suggested for the storage of cold cuts, desserts
FRUIT & VEGETABLE DRAWER
FREEZING ZONE DRAWER
(MAX COOL ZONE) Suggested to freeze fresh/cooked
food.
FREEZER DRAWER
400011082824
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
• Visiting our website docs . whirlpool . eu
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product's identication
plate.
TROUBLESHOOTING
Alarm type Signal Cause Cure
Door open alarm Door open alarm indicator remains on,
the acoustical alarm is activated and the
Alarm Indicator blinks.
The Fridge or Freezer door has
remained open for more
than 2 minutes.
Close the door or press the Stop
Alarm to mute the acoustical alarm.
Temperature alarm The Temperature display blinks (°C) and
the Alarm Indicator remains on.
IThe inside temperature is not
adequate
Press the Stop Alarm button ;
the acoustical alarm stops, the
Temperature Display (°C) blinks and
the Alarm Indicator remains on until
a temperature < -10°C is reached.
Antibacterial lter alarm The Antibacterial lter alarm indicator
lit on
Finished the validity of
Antibacterial lter.
Replace the Antibacterial lter, press
the Alarm button to reset it.
Long black-out alarm The Black Out Alarm icon remains on,
the Alarm indicator blinks.
Prolonged power failure,
able to cause the inside
temperature to increase to 0°C.
Press the Stop Alarm button ; the
acoustical alarm stops.
Malfunction The letter “F” blinks on the display (°C). Product malfunction. Contact the After-sales Service.


Product specificaties

Merk: Whirlpool
Categorie: Koel-vries combinaties
Model: BSNF 8352 W

Heb je hulp nodig?

Als je hulp nodig hebt met Whirlpool BSNF 8352 W stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Koel-vries combinaties Whirlpool

Handleiding Koel-vries combinaties

Nieuwste handleidingen voor Koel-vries combinaties