Whirlpool AWZ 8677 Handleiding

Whirlpool Wasdroger AWZ 8677

Lees hieronder de đź“– handleiding in het Nederlandse voor Whirlpool AWZ 8677 (4 pagina's) in de categorie Wasdroger. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
1
Machine operation
Additional information (including troubleshooting and service) can be found in the individual chapters of the
instructions for use.
Sort by:
Material thickness: Whenever there is greater load than the dryer can handle,
separate laundry according to weight (e.g. dry towels and thin underwear
separately).
Type of material: Cotton (linen); synthetic textiles (easy care).
Degree of drying: Cupboard dry, iron dry etc.
Do not tumble dry: Woollens, silk, nylon stockings, delicate embroidery, fabrics
with metallic decorations, bulky items such as sleeping bags, etc.
Check that all fastenings are closed and that pockets are empty. Please ensure that
there are no cigarette lighters in the wash. Turn laundry inside out.
Pull the door handle. If the child safety lock is activated, please deactivate it
(additional information can be found in the “Door Reversibility/Child Safety Lock”
chapter of the instructions for use).
Place laundry loosely in the drum to achieve equal drying throughout. Then close
the door.
Select the drying programme required by turning the programme selector knob
(for information, refer to programme table).
Select the option required by pressing the corresponding button.
The indicator lamp above the relevant button lights up to confirm your selection. A
fast blinking led indicates a wrong selection is made (incompatible options). Press
the button again to cancel the option.
The drying programme is started by pressing the “Départ (Pause)” button.
The relevant indicator lamp lights up.
Changing programme selection: If the programme selected is changed during
drying, the dryer stops. The Drying indicator lamps flashes. To operate the new
programme, again press the “Départ (Pause)” button.
Interrupting programme: To interrupt the dryer during the drying cycle, set the
programme selector knob to “Airing” “ ” and press the “Départ (Pause)”
button. Wait at least 5 minutes before opening the door to allow the dryer to cool
down. For your safety the drying cycle stops automatically if you open the door. To
restart, after door opening, close the door and press the “Départ (Pause)” button
again.
End: Take the laundry out of the dryer. The drying process is complete
and the anti-crease phase has been reached (active).
Anti-Crease: If the laundry is not removed at the end of the drying cycle,
an automatic anti-crease cycle will operate for maximum 60 min. The
drum rotates at regular intervals to from creasing. prevent the laundry
Set the programme selector knob to “Off” “ ”.
Cleaning the lint filter: Open door, pull lint filter up and out of machine and open
it. Brush lint using a soft brush or your fingertips. Close lint filter and push firmly
back into place.
Emptying water container: Pull container out by the handle and empty. Replace
the container when empty by pushing it completely back into place.
If required, activate child safety lock (additional information can be found in the “Door
Reversibility/Child Safety Lock” chapter of the instructions for use).
Please note: Only use additives/plastic items specified as dryer safe and rinse items that have been treated with stain remover
thoroughly in plenty of water before drying. Never dry rubber objects or objects stained with vegetable oils in the dryer.
Sort laundry according to
care symbols:
Do not tumble dry
Suitable for tumble drying -
Suitable for tumble drying
at low drying temperature
Preparing laundry
Opening door
Loading dryer and
closing door
Switching on machine and
selecting programme
Selecting options
(if available)
Starting dryer
Programme end -
unloading dryer
Switching dryer off
* Test programme in accordance with EN 61121.
Overview of programmes O
Programmes / Drying levels
Type of textile
Fabrics Volume
of load
kg
Gentle Rapid Bu
Ready to wear Multi-layered, thick laundry such as: terry towels,
dish cloths and dry towels, bed linen, underwear,
terry towelling bath robes. Cotton or linen hot wash /
coloured laundry
Max. 7 kg
3.0
7.0 X X
Cupboard dry * Similar types of laundry which do not require ironing
such as: dry towels, bed linen, underwear, baby
clothes, T-shirts, cotton socks.
3.0
7.0 X X
Iron dry * Laundry which requires ironing such as: bed and
table linen, dry towels, T-shirts, polo shirts,
work clothes.
3.0
7.0 X X
Ready to wear Laundry with thick, multi-layered areas such as:
bed and table linen, track suits, anoraks,
blankets. Synthetic, mixed fibre or
cotton easy care (ironing not
required) laundry
Max. 3.5 kg
1.0
3.5 X -
Cupboard dry * Laundry which does not require ironing such as:
shirts, blouses, T-shirts, sportswear. 1.0
3.5 X -
Iron dry Laundry which requires ironing such as:
trousers, dresses, skirts, shirts, blouses. 1.0
3.5 X -
Cupboard dry Low drying intensity for delicates and items
labelled with , such as: trousers, dresses,
shirts, blouses.
Laundry made from synthetic
fibres such as polyamide,
nylon, polyacrylic, etc.
Max. 2.5 kg
2.5 X -
Adjusted drying intensity for jeans to reach
an homogenous drying results.
Max. 3.0 kg
3.0 X X
Laundry is aired and refreshed for 30
minutes without heating. - - -
Completes drying (suitable for all
fabrics). - X -
CottonMixed fabrics
Delicate
plus
Special
programme
Airing
Drying
times
3
How to proceed if ...
...you want to
correctly care for
and clean your
dryer:
Clean the filter at the end of
every cycle.
• Open the door.
• Pull the filter upwards.
• Open the filter.
• Brush lint using a soft brush or your fingertips.
• Close the filter.
• Push the filter back into place.
Empty the water container at
the end of each drying cycle.
• Pull the handle to remove the water container.
• Empty the water container.
• Replace the water container when empty by
pushing it completely back in place.
Clean the heat exchanger at
least every month.
(For further information see
chapter “Heat Exchanger” in
the Instructions for Use).
• Remove fibres in and around the water
evacuation hole at least once per month.
...you want to check
the dryer yourself
first:
(If your machine is not
functioning correctly,
please check the
following points before
phoning for the
customer service – also
refer to relevant chapter
in the instructions for
use)
Drying takes too long / laundry
is not dry enough.
• Has the correct drying programme been
selected?
• Was the inserted laundry too wet (washing
machine spin speed less than 1000 rpm)?
• Is the lint filter dirty (filter indicator light on)?
• Is the heat exchanger dirty? (for more
information, refer to the instructions for use)
• Is the room temperature too high?
• Are the “End” “ ” and “Anti-crease”
“ ” indicator lamps lighting up? The
drying cycle is complete and the laundry can be taken out.
• If the drying result does not meet your
expectation, select a more dry programme.
The dryer will not operate
(after a power failure, always
press the “Départ (Pause)”
button).
• Is the plug properly inserted into the mains
electricity socket?
• Is there a power failure?
• Has the fuse blown?
• Is the door properly closed?
• Has a drying programme been selected?
• Has the “Départ (Pause)” button been
pressed?
• Has the start-delay option been selected?
Lint filter or water container
indicator lamp on.
• Is the lint filter clean?
• Is the water container empty?
• Has the water container been inserted correctly?
• Is the heat exchanger clean?
Water droplets underneath
the dryer.
• Has the heat exchanger been inserted correctly?
• Has any fluff on the heat exchanger seal been
wiped away?
• Has any fluff on the door seal been wiped away?
• Has the water container been inserted
correctly?
Replacing the drum light bulb
(if supplied).
• If the inside lamp does not work, the bulb may
be faulty.
• Unplug the dryer.
• Open the door and unscrew the glass cover
inside the drum.
• Replace the faulty bulb with a new one and
screw the glass cover back on.
• Replacement bulb: Philips 15W, 230/240V, E14.
All programme sequence
indicators blinking. • Service call necessary.
AFTER-SALES SERVICE
If the fault is still present once the above checks have been undertaken or should the fault occur for a second time, switch the machine off.
Please contact your After-Sales Service representative (for more information, refer to the warranty manual).
Please have the following details ready when calling your after-sales service representative:
• The nature of the fault.
• The dryer type and model.
• The service code (the number after the word Service on the adhesive rating
plate) on the right-hand side when the door is open.


Product specificaties

Merk: Whirlpool
Categorie: Wasdroger
Model: AWZ 8677

Heb je hulp nodig?

Als je hulp nodig hebt met Whirlpool AWZ 8677 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wasdroger Whirlpool

Handleiding Wasdroger

Nieuwste handleidingen voor Wasdroger