Whirlpool AWE 4317 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Whirlpool AWE 4317 (4 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Programme Care
Labels
Max.
Load
kg
Type of wash / Notes Detergents and Additives Special options Max.
Spin
Speed
rpm
Pre-
wash
Main
wash
Softener Cold
wash
Pre-
wash
Rapid Intensive
rinse
Rinse
hold
Variable
spin
6.0
Normally to heavily soiled bed linen, table linen, towels and garments made of cotton and/or linen. With
a longer programme duration, your cotton laundry is cleaned intensively. This programme offers you
the maximum energy saving for washing your 60°C cotton laundry. Yes
1) 4) max.
3.0 Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon). Yes
1) max.
1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses. Yes
1) – – max.
3.0 Slightly to normally soiled textiles made of cotton and/or synthetics. – Yes – – max.
3.0 Refreshed briefly worn outer clothing made of cotton, artificial fibers and blends with cotton. Use lowest
recommended detergent amount. – Yes – – – max.
1.0 Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable. This
programme (40ºC) is tested and approved by The Woolmark Company for machine washable wool. – Yes – – – – max.
1.0 Textiles made of silk, linen, wool and viscose marked as “handwashable”. – Yes – – – 400 3)
1.0 This cycle is particularly suitable to treat delicate lingerie (use of a laundry net strongly recommended). – Yes – – – 400 3)
Rinse & Spin – 6.0 – – – – – max.
Spin – 6.0 – – – – – – – – max.
Gentle Spin – 1.0 – – – – – – – – max.
Drain – – – – – – – – – – – –
Whirlpool is a registered trademark of Whirlpool USA.
1) Do not use liquid detergent for main wash if you
have activated prewash option.
2) Do not use liquid detergent.
3) For improved garment care, spin speed is restricted
to 400 rpm in this programme.
4) Selectable for programmes Cotton 40 and 60°C only.
Yes = dosing required / = optional
A
GE
D
F
B
C
I
H
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme Duration (hrs : min)
without “Rapid” with “Rapid”
Cotton / Antibacterial 95 6.0 53* 1.91 2:05 –
Cotton ** 60 6.0 48 1.02 4:00 2:30
Cotton ** 60 3.0 35 0.76 2:10 ***
Cotton 40 6.0 48 0.65 2:50 2:00
Cotton ** 40 3.0 35 0.57 2:00 ***
Synthetics 60 3.0 50* 0.90 2:05 1:14
Synthetics 40 3.0 40 0.50 1:50 0:59
Delicates 40 1.5 50 0.55 0:45 –
Daily load 40 3.0 40 0.45 1:00 –
Speed 15' 30 3.0 30 0.15 0:15 –
Wool 40 1.0 55 0.55 0:45 –
Handwash 40 1.0 40 0.55 0:35 –
Lingerie 30 1.0 40 0.40 0:31 –
1. Load the machine, close the drum doors and check
that they are properly locked.
2. Add detergent and eventual additives as described on
the front page and in your Instructions for use.
3. Close the lid.
4. Turn the to the desired
programme and temperature. The lamp next to the
button flashes.
Before starting and after end of a programme, the lamp
lights to show the the lid can be opened. As long as a
wash programme is running, the lid remains locked and
must on no account be forced open. In case you have
an urgent need to open it during a running programme,
refer to “Cancel (Reset) a running programme before
the end”.
• Enables quicker washing by shortening the
programme duration.
• Recommendable for small loads or only lightly soiled
laundry.
• The amount of water is increased to ensure a more
intensive rinse.
• This option is particularly suitable for areas with very
soft water, washing baby linen and people with skin
allergies.
The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing
and prevent colours from changing.
This option is particularly recommended for the
“Synthetics”, “Daily load” and “Delicates”
programmes.
It is useful if you want to postpone spinning to a later
time, or if you want to drain out only.
If you select “Rinse hold”, do not leave items to
soak for too long.
As soon as the appliance stops in the rinse hold, the
“Rinse hold” lamp of the sequence indicator lights up
and the lamp next to the button flashes.
Press the button; the programme
will terminate automatically with the final spin cycle
for the present wash programme.
Whirlpool is a registered trademark of Whirlpool USA.
Open the tap and press the button.
The indication lamp next to the button
lights up. The programme sequence indicator shows the
current programme phase, running from left to right
through Wash, Rinse, Spin/Drain. When the programme
phrase is finised, the corresponding indication goes out.
If there is a power interruption or if the
appliance is disconnected during the cycle, the
programme will run again from the point where it
was interrupted.
All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open lid and drum and unload the machine.
4. Leave the lid open for some time to allow the
interior of the machine to dry.
1. Press the button to pause the
programme. The light flashes.
2. Select the new programme, any options and another
spin speed if you want.
3. Press the button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.
The button cancels a programme before the
end. Press the button for at least 3 seconds.
Any existing water is drained out before the door can be
opened.
Water is heated only up to 20°C.
Suitable for delicate laundry items with wash
temperature recommendation of max. 30°C on the
care label.
Only for heavily soiled loads (for example sand,
granular dirt) . Increases the cycle time by
approximately 20 min.
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the
home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type
of wash. Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin
speed or temperature will change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that
time (see also “Troubleshooting Guide” in your Instructions for Use).
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Reference programmes for Energy Label.
*** Automatic adaption of programme duration after detection of wash load.
If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the button.
Every programme has a predefined spin speed.
Press the button to set another spin speed.
If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
the rinse. The water is drained out only.
In a case of any failures of irregularities, consult the
“Troubelshooting Guide” in Instruction for Use.
Lighting up of the “Service” indication can be caused by a
fault in an electrical component.
The washing machine has no or insufficient water supply;
the water tap might be closed or the water inlet hose
kinked.
Waste water is not pumped out. The drain hose may be
kinked or the filter must be cleaned (see “Cleaning the
filter” in your Instructions for Use).


Product specificaties

Merk: Whirlpool
Categorie: Wasmachine
Model: AWE 4317

Heb je hulp nodig?

Als je hulp nodig hebt met Whirlpool AWE 4317 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wasmachine Whirlpool

Handleiding Wasmachine

Nieuwste handleidingen voor Wasmachine