Whirlpool ADPU 502 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Whirlpool ADPU 502 (8 pagina's) in de categorie Afwasmachine. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
EN
1
DAILY REFERENCE
GUIDE
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance, please
register your appliance on www.whirlpool.eu/register
PRODUCT DESCRIPTION
APPLIANCE
Before using the appliance carefully read Health and Safety guide.
CONTROL PANEL
1. Upper rack
2. Sliding tray
3. Foldable aps
4. Upper rack height adjuster
5. Upper spray arm
6. Lower rack
7. Space Zone
8. Cutlery basket
9. Lower spray arm
10. Filter Assembly
11. Salt reservoir
12. Detergent and Rinse Aid dispensers
13. Rating plate
14. Control panel
To download the Use & Care Guide, connect to
the website http://docs. whirlpool.eu, following
the procedure shown on the last page.
0000 000 00000
Service:
1
2
3
4
5
6
7
8
9
10
11
1213
14
12 43567
8
9
10 11 12 13
14 15 16 17
1. On-O/Reset button with indicator light
2. Program selection button with indicator light
3. Multizone button with indicator light
4. Extra Dry button with indicator light / Keylock
5. Multizone indicator light
6. Eco program indicator light
7. Keylock indicator light
8. Display
9. Program number and Remaining Time indicator
10. Tablet (Tab) indicator light
11. Closed water tap indicator light
12. Rinse Aid Rell indicator light
13. Salt Rell indicator light
14. Turbo button with indicator light
15. Tablet (Tab) button with indicator light
16. Delay button with indicator light
17. Start/Pause button with indicator light / Drain out
2
ADVICE REGARDING THE FIRST TIME USE
After installation, remove the stoppers from the racks and the reta-
ining elastic elements from the upper rack.
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes
and on the machine’s functional components.
• It is important that the salt reservoir be never empty (except when
the water hardness is set to - 1 “Soft”).
• It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher (see
Product Description) and should be lled when the SALT REFILL indi-
cator light in the control panel is lit .
1. Remove the lower rack and unscrew the
reservoir cap (anticlockwise).
2. Position the funnel (see gure) and ll the
salt reservoir right up to its edge (approxi-
mately 1 kg); it is not unusual for a little wa-
ter to leak out.
3. Remove the funnel and wipe any salt resi-
due away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get
into the container during the wash program (this could damage the
water softener beyond repair).
Whenever you need to add salt, we recommend carrying out the
procedure before the washing cycle is started.
SETTING THE WATER HARDNESS
To allow the water softener to work in a perfect way, it is essential
that the water hardness setting is based on the actual water hard-
ness in your house. This information can be obtained from your local
water supplier.
The factory setting is for avarage (3) water hardness.
1. Switch on the appliance by pressing the ON/OFF button
2. Switch o the appliance by pressing the ON/OFF button
3. Hold down button START/PAUSE for 5 seconds, until you hear a
beep.
4. Switch on the appliance by pressing the ON/OFF button
5. The current selection level number and the salt indicator light
both ash.
6. Press button P to select the desired hardness level (see Water
Hardness Table).
7. Switch o the appliance by pressing the ON/OFF button
Setting is complete!
As soon as this procedure is complete, run a program without loading.
Only use salt that has been specically designed for dishwashers.
After the salt has been poured into the machine, the SALT REFILL in-
dicator light switches o.
If the salt container is not lled, the water softener and the
heating element may be damaged as a result (except when
the water hardness is set to - 1 “Soft”).
FIRST TIME USE
SALT, RINSE AID AND DETERGENT
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid dispenser “B”
should be lled:
• When the RINSE AID REFILL indicator light on the display is lit.
• When the dark optical indicator on the dispenser door “C” becomes
transparent.
1. Open the dispenser by turning the cap “A” in an anticlockwise direction.
2. Pour in the rinse aid, making sure it does not overow from the
dispenser. If this happens, clean the spill immediately with a dry cloth.
3. Screw the cap back on.
NEVER pour the rinse aid directly into the dishwasher.
ADJUSTING THE DOSAGE OF RINSE AID
If you are not completely satised with the drying results, you can
adjust the quantity of rinse aid used. Turn the adjuster “D”.
The factory setting is for a medium level.
• If you see bluish streaks on the dishes, set a low number (1-2).
• If there are drops of water or limescale marks on the dishes, set a
mid-range number (3-4).
FILLING THE DETERGENT DISPENSER
Open the detergent dispenser and measure out the detergent
according to Programs Table
A Rinse aid dispenser cap
(Unscrew the cap to ll the dispenser).
B Rinse aid dispenser
C Rinse aid level indicator
D Rinse aid dosage adjuster
(You can set up to a max. of 4 levels).
E Lid opening button
(Press to access the containers)
F Cover (Detergent containers)
Remove detergent residues from the edges of the containers
before closing the cover until it clicks.
G Pre-wash detergent container
Detergent for pre-wash (pour in the powder or liquid detergent
after consulting the Programs Table).
H Wash detergent container
Detergent for wash (pour in the powder, liquid or tablet detergent
after consulting the Programs Table).
The detergent dispenser automatically opens up at the right time ac-
cording to the program.
Only use detergent which has been specically designed for
dishwashers. DO NOT USE washing up liquid.
A
B
DCGH
F
E
Water Hardness Table Salt
needed
Level °dH
German degrees
°fH
French degrees
1 Soft 0 - 6 0 - 10 NO
2 Medium 6 - 11 11 - 20
YES
3 Average 12 - 17 21 - 30
4 Hard 17 - 34 31 - 60
5 Very hard 34 - 50 61 - 90
EN
3
Program
Drying
phase
Available
options *)
Detergent
container Duration of
wash cycle
(h:min)**)
Water
consumption
(l/cycle)
Energy
consumption
(kWh/cycle)
H G
1. Eco 50° 03:00 9 0.74
2. Sixth Sense 01:10 - 02:30 7 - 14 0.95 - 1.25
3. 1 Hour 01:00 13 0.95
4. Fragile 01:40 9 0.85
5. Rapid 00:25 8 0.45
6. Overnight 03:30 13 0.85
7. PreWash 00:10 4 0.01
8. Intensive 02:50 17 1.45
ECO program data is measured under laboratory conditions according to European Standard EN 50242.
*) Not all options can be used simultaneously.
**) The duration of the program shown on the display or in the booklet is an estimate calculated on standard conditions. The actual time may vary
depending on many factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
load, load balancing, additional selected options and sensor calibration. The sensor calibration can increase program duration up to 20 min.
Standby consumption: Left-on mode consumption: 5 W - O mode consumption: 0.5 W
Instructions on wash cycle selection.
1. ECO 50°
Normally soiled crockery. Standard program, the most ecient in
terms of its combined energy and water consumption.
2. SIXTH SENSE
For normally soiled dishes with dried food residues. Senses
the level of soiling on the dishes and adjusts the program
accordingly. When the sensor is detecting the soil level an
animation appears in the display and the cycle duration is up-
dated.
3. 1 HOUR 50°
For lightly soiled dishes that require a general drying in quick
time. (Ideal for 4 place settings).
4. FRAGILE 45°
Cycle for delicate items, which are more sensitive to high tempe-
ratures, for example glasses and cups.
5. RAPID 50°
Cycle to be used for lightly-soiled dishes with no dried food residues.
(Ideal for 2 place settings).
6. OVERNIGHT 50°
Optimum performance ensured. Suitable for night-time opera-
tion of the appliance.
7. PRE-WASH - Crockery to be washed later. No detergent.
8. INTENSIVE 65°
Recommended program for heavily soiled crockery, specially
suitable for pans and saucepans (not to be used for delicate
items).
Notes:
Optimum performance levels when using the “1 Hour” and “Rapid”
programs can be achieved by observing the maximum amounts of
specied place settings.
To reduce consumption even further, only run the dishwasher when
it is full.
Note for test laboratories: for information on EN comparative test con-
ditions, apply to EN address: contact@whirlpool.com
PROGRAMS DESCRIPTION
PROGRAMS TABLE


Product specificaties

Merk: Whirlpool
Categorie: Afwasmachine
Model: ADPU 502

Heb je hulp nodig?

Als je hulp nodig hebt met Whirlpool ADPU 502 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Afwasmachine Whirlpool

Handleiding Afwasmachine

Nieuwste handleidingen voor Afwasmachine