Wet Sounds Sinister SDX4 Handleiding

Bekijk gratis de handleiding van Wet Sounds Sinister SDX4 (10 pagina’s), behorend tot de categorie Receiver. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.5 sterren uit 9 reviews. Heb je een vraag over Wet Sounds Sinister SDX4 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

SINISTER

AMPLIFIER MANUAL

Congratulations! Thank you for purchasing the Wet Sounds

Sinister

TM

Series amplifier. Wet Sounds Sinister series of marine

amplifiers represents the pinnacle in 12 volt amplifier design.

The Sinister™ amplifiers are the highest power to size amplifiers

anywhere in the world for car or marine use. The Sinister

TM

amplifi-

ers use superior performance circuitry by utilizing Wet Sounds

exclusive full range Class D technology combined with Wet Sounds

MAXED™ Power supply. The MAXED power supply is a patent

pending technology designed to provide high efficiency levels never

thought to be achievable in a mobile audio amplifier. What this

means to you. Less current draw, less strain on the electrical

system, less generated heat. All this results in more play time! The

Sinister amplifiers share one size full cast aluminum chassis for all

models making installation a breeze and the ability to have a clean

install. All Sinister amplifiers feature a fully conformal coated 4

layer pcb board, single side power, speaker and input section, and

top mounted controls with removable cover. Sinister

TM

amplifiers

have a back lit Wet Sounds shield logo with selectable illumination

for red, white or blue that can be mounted horizontally or vertically

for flexible amplifier placement. Other features include high

pass/low pass/full range crossovers, flexible inputs source

selection for single or multiple RCA channel input, RCA pass

through on 4ch and 2ch, and removable speaker plugs that accept

large gauge wire. The Sinister

TM

amplifiers are not only extremely

powerful but also intelligent with a built in microprocessor controller

for overvoltage protection, undervoltage protection, DC offset and

speaker short protection, as well as thermal rollback to ensure

consistent play in the harsh marine environment. One of the most

amazing aspects of the Sinister

TM

amplifiers design is the efficiency

rating. All Sinister amplifiers achieve their efficiency rating at full 4

ohm rated power, the 6 ch is 82%, the 4ch is 84% and the 2ch is

86%. This translates into less current draw and less generated

heat. Over twice that of a conventional class AB amplifier and more

efficiency than any other full range class D amplifier.

WETSOUNDS.COM

SD2

SD4

SD6

ABOUT

1

Full Range Class D Amplifier

Product specificaties