Wet Sounds HTX-4 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Wet Sounds HTX-4 (19 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/19
1 2 4 6
HIGH PERFORMANCE MARINE AUDIO
HTX SERIES
1
CONGRATULATIONS!
Thank you for purchasing the Wet Sounds Hydro-Tech
TM X (HTX) series ampliî‚¿er.
Wet Sounds represents the ultimate in High Performance Marine Audio. Wet
Sounds HTX Series Marine Ampliî‚¿ers are designed to be a complete solution for
every type of extreme marine application. HTX ampliî‚¿ers use superior performance
circuitry by utilizing Class D Power Supplies. These ampliî‚¿ers have extreme
power output packed inside a small chassis, thermal overload protection, exible
crossovers, extended inputs. HTX ampliî‚¿ers are a well balanced match for all of
the Wet Soundsâ„¢ products.
WARNING
We build all Wet Sounds products to play at high volumes for extended periods of
time. Your ears however are not designed for high volume listening. This product
can easily generate high volumes that can permanently damage your hearing.
We urge you to limit your exposure to very high volume sound. You may also î‚¿nd
your state has laws governing the volume of an audio system. Please be aware
of all local and state laws in your area. A Properly tuned and operated audio
system will deliver years of enjoyment when used properly.
WARNING
Please check the installation location before you begin. Do not cut any of the boats
structure. Pay close attention to what items are behind the panels and carpet.
Often the manufacturer will hide wires, mechanical or other electronic devices in
the exact locations you wish to install in.
Wet Sounds HTX Series Owner’s Manual
WET SOUNDS HTX SERIES SUBWOOFER AMPLIFIERS
2
Wet Sounds HTX Series Owner’s Manual
INSTALLATION INSTRUCTIONS
Wet Sounds Marine Ampliî‚¿ers are designed for easy installation in your boat. To
ensure proper installation of your new purchase please follow all the suggestions
listed below. If you do not have experience with marine electrical and
mechanical systems contact a professional installer. Paying a qualiî‚¿ed
installer is almost always cheaper than paying a dealership to repair your
boat.
LOCATING THE AMPLIFIER
The ampliî‚¿er must be securely mounted to a solid surface. Please select a
dry location to mount your ampliî‚¿er. All Wet Sounds products are designed to
operate in humid environments however direct contact with water can damage
the electronics. Do not mount the ampliî‚¿er to any area that may have excessive
vibration (like a subwoofer enclosure). Position the ampliî‚¿er in an area that
receives sufcient airow for proper heat dissipation.
SUPPLYING ENOUGH POWER
Your ampliî‚¿er does NOT make power; it converts power, or current, from your
boats electrical system and converts it into high power musical energy. If the amp
can’t get all the power it needs it will not produce its full output. Your Wet Sounds
ampliî‚¿er will produce full output longer than other ampliî‚¿es on the market today.
Should your voltage or current drop too low the ampliî‚¿er will drop below the rated
output. Make sure your boats charging system is in good working order. Any high
performance audio ampliî‚¿er will increase the demand on your alternator and
battery. If you are unsure have you charging system checked system testing by a
professional technician.


Product specificaties

Merk: Wet Sounds
Categorie: Receiver
Model: HTX-4

Heb je hulp nodig?

Als je hulp nodig hebt met Wet Sounds HTX-4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Wet Sounds

Handleiding Receiver

Nieuwste handleidingen voor Receiver