Wesco 273265 Handleiding
Wesco
Niet gecategoriseerd
273265
Bekijk gratis de handleiding van Wesco 273265 (6 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 5.0 sterren uit 2 reviews. Heb je een vraag over Wesco 273265 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/6
Page1of6
Table of Contents
1 Specifications.................................................................................................................... 2
2 Safety Information.............................................................................................................. 2
3 Operation........................................................................................................................... 2
4 Maintenance...................................................................................................................... 2
5 Part Information................................................................................................................. 3
5.1 Pump Part Diagram.......................,......................................................................... 3
5.2 Pump Part List......................................................................................................... 4
5.3 Frame Assembly Part Diagram..,............................................................................. 5
5.4 Frame Assembly Part List........................................................................................ 6
WESCOINDUSTRIALPRODUCTS,INC
InstructionManual
HydraulicDieTable
PartNumber: 273265
Note: Operator MUST read and understand these operating instructions before
using this Table.
Page2of6
Hydraulic Die Table
(Part # 273265)
Instruction Manual
ATTENTION: TO INSURE SAFE AND EASY USE OF YOUR WESCO HYDRAULIC
TABLE, READ THESE INSTRUCTIONS ENTIRELY BEFORE USING.
1. SPECIFICATIONS
Part Number
273265
Model
DT-2436
Capacity
2,000 lbs
Table Size (L x W)
36” x 24”
Table Thickness
.2”
Lowered Height
24.25”
Lifting Height
36”
Overall
Dimensions
Height
36.75”
Width
24”
Depth
49.5”
Wheel
Load Wheel Diameter
5” x 1.5”
Steering Wheel Diameter
4.75” x 1.5”
Weight
265 lbs
Materials and specifications are subject to change without notice.
2. SAFETY INFORMATION
1、 Do not load the hydraulic table beyond its rated capacity (2,000 lbs).
2、 Do not allow people to sit or ride on the hydraulic table.
3、 Secure load before raising or lowering the hydraulic table.
4、 Do not transport loads while the hydraulic table is in a raised position.
5、 Use only on smooth surfaces.
6、 Keep hands and feet clear when raising or lowering lift.
7、 Press the small pedal slowly, to avoid dropping the load too quickly.
8、 Failure to comply with the instructions and warnings in this manual may result in personal injury or
property damage.
3. OPERATION
1) Push the table to the area where desired for operation.
2) Engage the brake bar with hand to fix the table in place.
3) Press the big pedal and to raise the table.
4) Press the small release pedal and the table will lower slowly.
4. MAINTENANCE
1
、
Lubricate each friction point monthly with a good, quality grease.
2
、
Check the free movement and wear of wheels. Replace if needed.
3
、
Check caster brake function. It should lock firmly and release completely.
4
、
Check
for oil leakage from hydraulic cylinder.
Product specificaties
| Merk: | Wesco |
| Categorie: | Niet gecategoriseerd |
| Model: | 273265 |
Heb je hulp nodig?
Als je hulp nodig hebt met Wesco 273265 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Wesco
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
Handleiding Niet gecategoriseerd
- Adj
- CDP
- Pentel
- Maytronics
- Platinum Tools
- Laifen
- Bender
- Firefriend
- Nevir
- LockCircle
- Verizon
- Mammut
- Toro
- Applico
- FSR
Nieuwste handleidingen voor Niet gecategoriseerd
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025