Wells SS206D Handleiding
Wells
Warmhoudplaat
SS206D
Lees hieronder de đź“– handleiding in het Nederlandse voor Wells SS206D (24 pagina's) in de categorie Warmhoudplaat. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/24
WELLS MANUFACTURING
10 Sunnen Dr., St. Louis, MO 63143
telephone: 314-678-6314
www.wellsbloomfield.com
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
OWNERS MANUAL
DROP-IN and
BOTTOM-MOUNT
UNSHROUDED
WARMERS
with
INFINITE SWITCH
CONTROL
MODELS
SS206(D)
SS206E(D)
SS206ER(D)
Includes
INSTALLATION
USE & CARE
EXPLODED VIEW
PARTS LIST
WIRING DIAGRAM
012B
2M-308028 Rev. (B) 13 M012B.01 0429
SS206
SS206E
M012B.01 2M-308028 Owners Manual for SS206 Built-In Inf Sw. Warmers
equipment manufactured by Wells Manufacturing is
warranted against defects in materials and workmanship
for a period of one year from the date of original installation
or 18 months from the date of shipment from our factory,
whichever comes îšżrst, and is for the beneîšżt of the original
purchaser only.
THIS WARRANTY IS THE COMPLETE AND ONLY
WARRANTY, EXPRESSED OR IMPLIED IN LAW
OR IN FACT, INCLUDING BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR ANY PARTICULAR PURPOSE, AND/OR FOR
DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES
IN CONNECTION WITH WELLS MANUFACTURING
PRODUCTS. This warranty is void if it is determined
that, upon inspection by an authorized service agency,
the equipment has been modiîšżed, misused, misapplied,
improperly installed, or damaged in transit or by re, ood or
act of God. It also does not apply if the serial nameplate has
been removed, or if service is performed by unauthorized
personnel. The prices charged by Wells Manufacturing for
Seller’s obligation under this warranty is limited to the
repair of defects without charge by a Wells Manufacturing
factory authorized service agency or one of its sub-service
agencies. This service will be provided on customer’s
premises for non-portable models. Portable models (a
device with a cord and plug) must be taken or shipped
to the closest authorized service agency, transportation
charges prepaid, for service. In addition to restrictions
contained in this warranty, speciîšżc limitations are shown in
the Service Policy and Procedure Guide. Wells Bloomîšżeld
authorized service agencies are located in principal cities.
This warranty is valid in the United States and Canada and
void elsewhere. Please consult your classiîšżed telephone
directory, your foodservice equipment dealer or contact:
Wells Manufacturing
10 Sunnen Dr., St. Louis MO 63143 USA
phone (314) 678-6314 or fax (314) 781-2714
for information and other details concerning warranty.
LIMITED WARRANTY STATEMENT
SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS
NOTE: For your protection, please note that equipment
in this shipment was carefully inspected and packaged
by skilled personnel before leaving the factory. Upon
acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1. Be certain that any VISIBLE LOSS OR DAMAGE:
visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is
signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.
3. if damage isCONCEALED LOSS OR DAMAGE:
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and îšżle
“CONCEALED DAMAGE” claim with them. This
should be done within îšżfteen (15) days from the date
the delivery was made to you. Be sure to retain the
container for inspection.
Wells Manufacturing cannot assume liability for damage or
loss incurred in transit. We will, however, at your request,
supply you with the necessary documents to support your
claim.
SHIPPING DAMAGE CLAIM PROCEDURE
xi
1. Resetting of safety thermostats, circuit breakers, over
load protectors, and/or fuse replacements are not
covered by this warranty unless warranted conditions
are the cause.
2. All problems due to operation at voltages or phase
other than speciîšżed on equipment nameplates are
not covered by this warranty.
Conversion to correct voltage and/or phase must be
the customer’s responsibility.
3. All problems due to electrical connections not made
in accordance with electrical code requirements
and wiring diagrams supplied with the equipment are
not covered by this warranty.
4. Replacement of items subject to normal wear, to
include such items as knobs, light bulbs; and, normal
maintenance functions including adjustments of
thermostats, adjustment of micro switches and
replacement of fuses and indicating lights are not
covered by warranty.
5. Damage to electrical cords and/or plug due to exposure
to excessive heat are covered by this warranty.not
6. Full use, care, and maintenance instructions supplied
with each machine. Noted maintenance and
preventative maintenance items, such as servicing and
cleaning schedules, are customer responsibility.
Those miscellaneous adjustments noted are customer
responsibility. Proper attention to preventative
maintenance and scheduled maintenance procedures
will prolong the life of the appliance.
7. Travel mileage is limited to from an sixty (60) miles
Authorized Service Agency or one of its sub-service
agencies.
8. All labor shall be performed during regular working
hours. Overtime premium will be charged to the buyer.
9. All genuine Wells replacement parts are warranted
for ninety (90) days from date of purchase on non-
warranty equipment. This parts warranty is limited only
to replacement of the defective part(s). use of Any
non-genuine voids any Wells parts completely
warranty.
10. Installation, labor, and job check-outs are not
considered warranty and are thus covered by this not
warranty.
11. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technician’s ability to
perform service are covered by warranty. This not
includes institutional and correctional facilities.
3
M012B.01 2M-308028 Owners Manual for SS206 Built-In Inf Sw. Warmers
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
AGENCY LISTING INFORMATION 3
INSTALLATION 4
OPERATION 6
MAINTENANCE INSTRUCTIONS 7
CLEANING INSTRUCTIONS 8
TROUBLESHOOTING SUGGESTIONS 10
EXPLODED VIEW & PARTS LIST 11
WIRING DIAGRAM 14
PARTS & SERVICE 16
CUSTOMER SERVICE DATA 17
Thank You for purchasing this Wells Manufacturing appliance.
Proper installation, professional operation and consistent maintenance of this appliance will ensure that it
gives you the very best performance and a long, economical service life.
This manual contains the information needed to properly install this appliance, and to use and care for the
appliance in a manner which will ensure its optimum performance.
TABLE OF CONTENTS
INTRODUCTION
SPECIFICATIONS
MODEL VOLTS AMPS WATTS POWER SUPPLY CORD
SS206 (D) 120 VAC 1 PH 1200W10.0 Amp
NOT SUPPLIEDSS206E (D) 208 VAC 1 PH 900W4.3 Amp
SS206ER (D) 240 VAC 1 PH 1200W5.0 Amp
Product specificaties
| Merk: | Wells |
| Categorie: | Warmhoudplaat |
| Model: | SS206D |
Heb je hulp nodig?
Als je hulp nodig hebt met Wells SS206D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Warmhoudplaat Wells
24 Juni 2023
19 Juni 2023
16 Juni 2023
13 Juni 2023
10 Juni 2023
9 Juni 2023
8 Juni 2023
7 Juni 2023
27 Mei 2023
21 Mei 2023
Handleiding Warmhoudplaat
- Warmhoudplaat Topcom
- Warmhoudplaat Unold
- Warmhoudplaat Ariete
- Warmhoudplaat Bartscher
- Warmhoudplaat Beem
- Warmhoudplaat Bifinett
- Warmhoudplaat Bomann
- Warmhoudplaat Duronic
- Warmhoudplaat Ernesto
- Warmhoudplaat Esperanza
- Warmhoudplaat Fritel
- Warmhoudplaat Hendi
- Warmhoudplaat Presto
- Warmhoudplaat Princess
- Warmhoudplaat Rommelsbacher
- Warmhoudplaat Saro
- Warmhoudplaat Steba
- Warmhoudplaat Suntec
- Warmhoudplaat Swan
- Warmhoudplaat Tristar
- Warmhoudplaat Olympia
- Warmhoudplaat Ardes
- Warmhoudplaat Proctor Silex
- Warmhoudplaat Waring Commercial
- Warmhoudplaat Brentwood
- Warmhoudplaat Chefman
- Warmhoudplaat Casselin
- Warmhoudplaat CombiSteel
- Warmhoudplaat Max Pro
- Warmhoudplaat Bimar
- Warmhoudplaat CaterChef
- Warmhoudplaat Avantco
- Warmhoudplaat APW Wyott
- Warmhoudplaat Hatco
- Warmhoudplaat Merco
- Warmhoudplaat Perfect Fry
- Warmhoudplaat Alto-Shaam
- Warmhoudplaat Benchmark USA
Nieuwste handleidingen voor Warmhoudplaat
25 April 2024
8 April 2024
8 April 2024
31 Maart 2024
31 Maart 2024
31 Maart 2024
31 Maart 2024
4 Maart 2024
17 Augustus 2023
12 Augustus 2023