Wells OC1 Handleiding

Wells Oven OC1

Lees hieronder de 📖 handleiding in het Nederlandse voor Wells OC1 (24 pagina's) in de categorie Oven. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
WELLS MANUFACTURING
10 Sunnen Dr., St. Louis, MO 63143
telephone: 314-678-6314
fax: 314-781-2714
www.wellsbloomeld.com
p/n Rev. - M273 2M-Z14729 110519
273
OWNERS MANUAL
HALF-SIZE
CONVECTION
OVEN
MODELS
OC1
Includes
INSTALLATION
USE & CARE
EXPLODED VIEW
PARTS LIST
WIRING DIAGRAM
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
OC1
M273 p/n 2M- Owners Manual OC1 Half-Size Convection OvensZ14729
Unless otherwise specied, all commercial cooking
equipment manufactured by Wells Manufacturing is
warranted against defects in materials and workmanship
for a period of one year from the date of original installation
or 18 months from the date of shipment from our factory,
whichever comes rst, and is for the benet of the original
purchaser only.
THIS WARRANTY IS THE COMPLETE AND ONLY
WARRANTY, EXPRESSED OR IMPLIED IN LAW OR IN
FACT, INCLUDING BUT NOT LIMITED TO, WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE, AND/OR FOR DIRECT,INDIRECT
OR CONSEQUENTIAL DAMAGES INCONNECTION WITH
WELLS BLOOMFIELD PRODUCTS. This warranty is void
if it is determined that, upon inspection by an authorized
service agency, the equipment has been modied, misused,
misapplied, improperly installed, or damaged in transit
or by re, ood or act of God. It also does not apply if
the serial nameplate has been removed, or if service is
performed by unauthorized personnel. The prices charged
by Wells Manufacturing for its products are based upon the
limitations in this warranty. Seller’s obligation under this
warranty is limited to the repair of defects without charge by
a Wells Manufacturing factory authorized service agency
or one of its sub-service agencies. This service will be
provided on customer’s premises for non-portable models.
Portable models (a device with a cord and plug) must be
taken or shipped to the closest authorized service agency,
transportation charges prepaid, for service. In addition to
restrictions contained in this warranty, specic limitations are
shown in the Service Policy and Procedure Guide. Wells
Manufacturing authorized service agencies are located in
principal cities. This warranty is valid in the United States and
Canada and void elsewhere. Please consult your classied
telephone directory, your foodservice equipment dealer or
contact:
Wells Manufacturing
10 Sunnen Dr., St. Louis MO 63143 USA
phone (314) 678-6314 or fax (314) 781-2714
for information and other details concerning warranty.
LIMITED WARRANTY STATEMENT
SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS
NOTE: For your protection, please note that equipment
in this shipment was carefully inspected and packaged
by skilled personnel before leaving the factory. Upon
acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1. VISIBLE LOSS OR DAMAGE: Be certain that any
visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is
signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.
3. CONCEALED LOSS OR DAMAGE: if damage is
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and le
“CONCEALED DAMAGE” claim with them. This
should be done within fteen (15) days from the date
the delivery was made to you. Be sure to retain the
container for inspection.
Wells Manufacturing cannot assume liability for damage or
loss incurred in transit. We will, however, at your request,
supply you with the necessary documents to support your
claim.
SHIPPING DAMAGE CLAIM PROCEDURE
xi
1. Resetting of safety thermostats, circuit breakers, over
load protectors, and/or fuse replacements are not
covered by this warranty unless warranted conditions
are the cause.
2. All problems due to operation at voltages or phase
other than specied on equipment nameplates are not
covered by this warranty. Conversion to correct voltage
and/or phase must be the customer’s responsibility.
3. All problems due to electrical connections not made
in accordance with electrical code requirements
and wiring diagrams supplied with the equipment are
not covered by this warranty.
4. Replacement of items subject to normal wear, to
include such items as knobs, light bulbs; and, normal
maintenance functions including adjustments of
thermostats, adjustment of micro switches and
replacement of fuses and indicating lights are not
covered by warranty.
5. Damage to electrical cords and/or plug due to exposure
to excessive heat are not covered by this warranty.
6. Full use, care, and maintenance instructions supplied
with each machine. Noted maintenance and
preventative maintenance items, such as servicing and
cleaning schedules, are customer responsibility. Those
miscellaneous adjustments noted are customer
responsibility. Proper attention to preventative
maintenance and scheduled maintenance procedures
will prolong the life of the appliance.
7. Travel mileage is limited to sixty (60) miles from an
Authorized Service Agency or one of its sub-service
agencies.
8. All labor shall be performed during regular working
hours. Overtime premium will be charged to the buyer.
9. All genuine Wells replacement parts are warranted
for ninety (90) days from date of purchase on non-
warranty equipment. This parts warranty is limited only
to replacement of the defective part(s). Any use of
non-genuine Wells parts completely voids any
warranty.
10. Installation, labor, and job check-outs are not
considered warranty and are thus not covered by this
warranty.
11. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technician’s ability to
perform service are not covered by warranty. This
includes institutional and correctional facilities.
M273 p/n 2M- Owners Manual OC1 Half-Size Convection OvensZ14729
WARRANTY xi
SPECIFICATIONS 1
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 4
INSTALLATION 5
AGENCY APPROVAL INFORMATION 5
OPERATION 8
COOKING SUGGESTIONS 10
CLEANING INSTRUCTIONS 11
TROUBLESHOOTING SUGGESTIONS 13
PREVENTATIVE MAINTENANCE 14
EXPLODED VIEW & PARTS LIST 16
WIRING DIAGRAM 21
PARTS & SERVICE 25
CUSTOMER SERVICE DATA 25
Proper installation, professional operation and consistent maintenance of this appliance will ensure that it
gives you the very best performance and a long, economical service life.
This manual contains the information needed to properly install this appliance, and to use and care for the
appliance in a manner which will ensure its optimum performance.
TABLE OF CONTENTS
SPECIFICATIONS
INTRODUCTION
1
SPECIFICATIONS
MODEL VOLTS
WATTS AMPS PE R LEG 3ø AMPS
1ø
POWER
SUPPLY
CORD
OVEN HOTPLATES TOTAL L1 L2 L3
OC1 208 1ø 5000 NONE 5000 24 NEMA 6-30P
240 1ø 5600 NONE 5600 24
DIMENSIONS
HEIGHT WIDTH DEPTH DOOR
SWING REQUIRED CLEARANCES
30-1/4” (768mm)
plus 6” (152mm)
legs or casters
30-1/4”
(768mm)
26-1/4” (641mm)
plus 1-13/16”
(46mm) handle
21” (635mm)
radius
Bottom 6” (152mm)
Front 21” (533mm)
Top n/a
Back 3” (76mm)
Sides 3” (76mm)


Product specificaties

Merk: Wells
Categorie: Oven
Model: OC1

Heb je hulp nodig?

Als je hulp nodig hebt met Wells OC1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Oven Wells

Wells

Wells OC1 Handleiding

3 Juni 2023

Handleiding Oven

Nieuwste handleidingen voor Oven