Watson AM-95-NC Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Watson AM-95-NC (4 pagina's) in de categorie Accu's camera. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Thank you for choosing Watson Pro
AM-95-NC
VM-95-NC
Li-ion Battery with LCD
and 3-Stud or V Mount
TM
Please read this user manual carefully and keep
it for reference before using the battery.
SAFETY INSTRUCTIONS
Make sure the battery is fully charged before use.
When not in use, remove the battery from its device. Some
electronic equipment will draw current even when the switch is off.
Do not short-circuit the terminals. This battery is protected with
an internal self-resetting fuse, but short circuits may still cause
severe damage to the battery.
Do not attempt to open the battery case under any circumstances.
Do not remove the battery from any equipment that is powered on.
Always power off your equipment before removing the battery.
Use the battery only under proper environmental conditions: 14°F
to 122°F (-10°C to 50°C) and with a relative humidity (RH) less than
85%.
Storage environment: short-term (one month) -4°F to 122°F (-20°C
to 50°C) and RH 45% to 75%; medium-term (three months) -4°F
to 104°F (-20°C to 40°C) and RH 45% to 75%; long-term (one year)
23°F to 86°F (-5°C to 30°C) and RH 45% to 75%.
The battery may be warm during use or recharging. This is normal.
The battery should be charged up to 50% for long-term storage.
After 4 months of storage, the battery will require a recharge up
to 50%.
Keep the battery out of fire, heat, and high pressure.
Do not expose the battery to rain or moisture.
Do not drop the battery or expose it to strong shocks.
Keep this unit away from water and any flammable gases or liquids.
Clean the battery and terminals with a clean, soft, and dry cloth.
When operation time has noticeably decreased, the battery may
need to be replaced.
Keep this product away from children.
Store the battery in a cool, dry place.
PRODUCT FEATURES
LCD screen shows real-time,
to-the-minute, remaining
battery capacity and usage.
Built-in P-tap connector
powers your camera
accessories.
5 V/1 A USB 2.0 output for
USB-powered devices.
Built-in intelligent control
circuit for protection against
damage caused by current,
voltage, temperature, or
short-circuiting.
OVERVIEW
1. LCD
Battery capacity meter
Remaining charging or usage
time (minutes)
Charging indicator
Battery capacity percentage
1. Battery-level check button
1. P-tap port
12 V, 10 A max.
USB output
Press the battery level check
button to start charging or to
power your USB device.
1. Mounting interface
Re ti me :000 00 M
88%
POWER
CHECK
1
1
2
2
3
3
4
4
5
5


Product specificaties

Merk: Watson
Categorie: Accu's camera
Model: AM-95-NC

Heb je hulp nodig?

Als je hulp nodig hebt met Watson AM-95-NC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden