Warmup Ultralight Handleiding
Warmup
Niet gecategoriseerd
Ultralight
Bekijk gratis de handleiding van Warmup Ultralight (6 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 38 mensen en kreeg gemiddeld 4.6 sterren uit 19.5 reviews. Heb je een vraag over Warmup Ultralight of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/6

Installation manual
Warmup Ultralight 10YEAR
LIMITED
WARRANTY
W
A
R
M
U
P
1
0
Y
E
A
R
W
A
R
R
A
N
T
Y
W
A
R
M
U
P
1
0
Y
E
A
R
W
A
R
R
A
N
T
Y
4in1
Insulating
Heat Spreading
Decoupling
Sound Reducing

2
Installation
The suboor must be clean and dry and if necessary, smoothed
with a self-levelling compound to give an even surface.
NOTE: The maximum permissible departure from a 2 m straight
edge, resting under its own weight on the suboor is 3 mm. (SR1
Standard - BS 8204).
Prime suboors with a dilute (1:4) SBR solution. For proprietary
suboors refer to the manufacturer instructions.
Provided the suboor is adequately prepared and clean, it may
not be necessary to prime. This can vary depending tile adhesive
selection. Please refer to the tile adhesive manufacturers
instructions for priming information.
1
2

3
Installation
Ultralight should be installed using a exible, cement-based
adhesive. The adhesive should be trowelled out and combed
through using a 6 mm x 6 mm (¼” x ¼”) square notch trowel to give
a ribbed bed, any slight depressions in the suboor being lled by
the mortar.
NOTE: If you plan to apply a levelling compound over Ultralight
apply Warmup perimeter strip to the edge of the room to allow for
dierential movement between the nished oor level and walls.
Ultralight should be laid on the freshly applied ribbed bed and
thoroughly bedded in to ensure that no voids are left beneath the
boards and they are solidly supported. All boards should be laid
with staggered joints.
NOTE: Allow the adhesive attaching the boards to the suboor
to cure before laying electric underoor heating directly onto the
boards.
3
4
Product specificaties
Merk: | Warmup |
Categorie: | Niet gecategoriseerd |
Model: | Ultralight |
Heb je hulp nodig?
Als je hulp nodig hebt met Warmup Ultralight stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Warmup
20 November 2024
20 November 2024
20 November 2024
20 November 2024
20 November 2024
20 November 2024
20 November 2024
20 November 2024
20 November 2024
20 November 2024
Handleiding Niet gecategoriseerd
- Frigidaire
- ErgoAV
- Corel
- Hansa
- Haeger
- Cable Matters
- Polti
- Cuggl
- Nemef
- TechN
- Bowflex
- Electrolux
- Spektrum
- Batronix
- Toolcraft
Nieuwste handleidingen voor Niet gecategoriseerd
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025