Wagner Super Finish 31 Handleiding
Bekijk gratis de handleiding van Wagner Super Finish 31 (30 pagina’s), behorend tot de categorie Overig. Deze gids werd als nuttig beoordeeld door 54 mensen en kreeg gemiddeld 3.5 sterren uit 27.5 reviews. Heb je een vraag over Wagner Super Finish 31 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/30
3
5
4
3
5
4
0341 855Ausgabe 03/2009
Edition
Edizione
Betriebsanleitung
Operating manual .................p. 24
Mode d’emploi .......................p. 48
Airless Hochdruck-Spritzgerät
Airless high-pressure spraying unit
Groupe de projection à haute pression
Impianto per la verniciatura a spruzzo ad alta pressione Airless
Super Finish 27 • 31
24
GB
Warning!
Never put your fingers, hands or any other parts of the body into the
spray jet!
Never point the spray gun at yourself, other persons or animals.
Never use the spray gun without safety guard.
Do not treat a spraying injury as a harmless cut. In case of injury to
the skin through coating materials or solvents, consult a doctor
immediately for quick and expert treatment. Inform the doctor
about the coating material or solvent used.
The operating instructions state that the following points must
always be observed before starting up:
1. Faulty units must not be used.
2. Secure WAGNER spray gun using the safety catch on the
trigger.
3. Ensure that the unit is properly earthed. The connection
must take place through a correctly earthed two-pole and earth
socket outlet.
4. Check allowable operating pressure of high-pressure hose and
spray gun.
5. Check all connections for leaks.
The instructions regarding regular cleaning and maintenance of the
unit must be strictly observed.
Before any work is done on the unit or for every break in work the
following rules must be observed:
1. Release the pressure from spray gun and hose.
2. Secure the WAGNER spray gun using the safety catch
on the trigger.
3. Switch off unit.
Be safety-conscious!
Attention: Danger of injury by injection!
Airless units develop extremely high spraying pressures.
Danger
1
2
3
Super Finish 27 • 31 25
GB
Contents
______________________
_________ 27/28
2.1 Application _________________________________ 27
2.2 Coating materials ____________________________ 27
___________________
3.1 Airless process _______________________________ 28
3.2 Functioning of the unit ________________________ 28
3.3 Explanatory diagram _________________________ 29
– Vertical set-up with suction system
– Horizontal set-up with upper hopper
3.4 Technical data Super Finish 27 and 31 ____________ 30
3.5 Transport ___________________________________ 30
___________________
4.1 Unit with suction system ______________________ 30
4.2 Unit with upper hopper (5 litres) _____________ 30/31
4.3 High-pressure hose and spray gun _______________ 31
4.4 Connection to the mains ______________________ 31
4.5 Cleaning preserving agent when
starting-up of operation initially ________________ 31
4.6 Ventilate unit (hydraulic system) if the
sound of the inlet valve is not audible __________31/32
4.7 Starting operation of unit with coating
material ____________________________________ 32
4.8 Socket on unit _______________________________ 32
______________________
________
6.1 High-pressure hose ___________________________ 32
____________________
___________
8.1 Cleaning unit from outside _____________________ 33
8.2 Suction lter ________________________________ 34
8.3 High-pressure lter (accessory) _________________ 34
8.4 Cleaning Airless spray gun G 12 _________________ 34
________
_________________________________
10.1 General servicing _____________________________ 36
10.2 High-pressure hose ___________________________ 36
____________________
11.1 Inlet valve trigger with Super Finish 31 ___________ 37
11.2 Inlet valve __________________________________ 37
11.3 Outlet valve _________________________________ 37
11.4 Pressure regulating valve ______________________ 18
11.5 Relief valve __________________________________ 38
11.6 Exchanging diaphragm ________________________ 39
11.7 Replace unit connection line ___________________ 39
11.8 Circuit diagram ______________________________ 40
__________
12.1 Accessories for Super Finish 27 and 31 ___________ 41
Accessories illustration for Super Finish 27 and 31 __ 42
Accessories illustration for Super Finish 27 and 31 __ 95
12.2 Spare parts list pump head Super Finish 27 and 31 _ 43
Spare parts diagram pump head
Super Finish 27 and 31 ________________________ 96
12.3 Spare parts list trolley _________________________ 43
Spare parts diagram trolley_____________________ 97
12.4 Spare parts list suction system __________________ 43
Spare parts diagram suction system _____________ 97
12.5 Spare parts list upper hopper 5 litres _____________ 43
Spare parts diagram upper hopper 5 litres ________ 97
12.6 Spare parts list upper hopper 20 litres ____________ 43
Spare parts diagram upper hopper 20 litres _______ 97
12.7 Spare parts list pump aggregate
Super Finish 27 and 31 ________________________ 44
Spare parts diagram pump aggregate
Super Finish 27 and 31 ________________________ 98
______________________________
13.1 Selection of tip ______________________________ 45
13.2 Servicing and cleaning of Airless hard-metal tips ___ 45
13.3 Spray gun accessories _________________________ 45
13.4 Airless tip table _____________________________ 46
_______
_______________
____________________________
________________________________
_________________
Product specificaties
| Merk: | Wagner |
| Categorie: | Overig |
| Model: | Super Finish 31 |
Heb je hulp nodig?
Als je hulp nodig hebt met Wagner Super Finish 31 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Overig Wagner
13 Oktober 2023
13 Oktober 2023
13 Oktober 2023
13 Oktober 2023
Handleiding Overig
- PLS - Fluke
- Duro
- Turbotech
- Gloria
- Huvema
- Omega
- Proxxon
- Parkside
- Spero
- Husqvarna
- Bartec
- Fuxtec
- Hikoki
- Ateq
- Al-ko
Nieuwste handleidingen voor Overig
5 Februari 2024
14 Januari 2024
14 Januari 2024
8 Januari 2024
10 December 2023
10 December 2023
10 December 2023
10 December 2023
10 December 2023
10 December 2023