VTech CS6124-11 Handleiding

Bekijk gratis de handleiding van VTech CS6124-11 (1 pagina’s), behorend tot de categorie HŰTŐK. Deze gids werd als nuttig beoordeeld door 52 mensen en kreeg gemiddeld 4.8 sterren uit 9 reviews. Heb je een vraag over VTech CS6124-11 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick start guide (Canada version)

CS6124/CS6124-11/CS6124-2/

CS6124-21/CS6124-31

Introduction

This quick start guide provides you with the basic installation

instructions. A limited set of features are described in

abbreviated form.

Please refer to the online user’s manual for complete installation

and operation instructions.

Telephone base and charger installation

Install the telephone base and charger as shown below.

Use only the power adapters and batteries supplied with

this product.

Battery installation and charging

Install the battery as shown below. Once you have installed the

battery, you may be able to make and receive short calls. For best

performance, charge the handset battery continuously for at least

16 hours.

Enter the handset menu

Press when the phone is not in use.MENU

Press or until the screen displays the desired CID

feature menu.

Press to enter that menu.SELECT

To return to the previous menu, press .CANCEL

To return to idle mode, press and hold .CANCEL

Set date and time

Press when the handset is not in use.MENU

Scroll to then press SettingsSELECT.

Scroll to then press Set date/timeSELECT.

Use the dialing keys (-) to enter the current month, date and 09

year. Then press SELECT.

Use the dialing keys (-) to enter the hour and minute. Then 09

press or to select or .CIDAMPM

Press to save.SELECT

1.

2.

3.

•

•

1.

2.

3.

4.

5.

6.

IMPORTANT!

Refer to the online user’s manual for a full set of installation and

operation instructions. For manual download or customer service,

visit our website at www.vtechcanada.com or call 1 (800) 267-7377.

Copyright © 2012 for VTECH TELECOMMUNICATIONS LTD.

All rights reserved. Printed in China.

96-008393-020-100

Set number of rings

You can set the answering system to answer an incoming call

after 2, 3, 4, 5 or 6 rings; or toll saver. If you choose toll saver,

the answering system answers a call after 2 rings when you

have new messages, or after 4 rings when you have no

new messages.

Press when the handset is not in use.MENU

Scroll to then press Answering sysSELECT.

Scroll to then press Ans sys setupSELECT.

Scroll to then press # of ringsSELECT.

Press or to choose , , , , or CID65432Toll saver and

then press to save.SELECT

Record your own announcement

You can use the preset announcement to answer calls, or replace it

with your own recorded announcement. The announcement can be

up to 90 seconds in length.

Press when the handset is not in use.MENU

Scroll to then press twice.Answering SysSELECT

Press to record.7

After the handset announces,

“Record after the tone. Press 5

when you are done,”

speak towards the handset microphone.

Press when done.5

Press to play the recorded announcement; or to record 27

again if desired. Press to delete the recorded announcement. 3

Press to stop the playback at any time.5

1.

2.

3.

4.

5.

1.

2.

3.

4.

5.

6.

Telephone base

Telephone

line cord

Electrical outlet

(not controlled by

a wall switch)

Telephone wall jack

A DSL lter

(not included)

is required if

you have DSL

high-speed

Internet service

Telephone base

power adapter

Charger

Charger

adapter

3

Slide the battery

compartment cover towards

the center of the handset

until it clicks into place.

4

Charge the handset in the

telephone base or charger.

CHARGElight

remains on

when charging.

1

Plug the battery connector

securely into the socket.

2

Place the battery with the

wires inside the battery

compartment.

Product specificaties