Vortex Viper HD 10x50 Handleiding

Vortex Verrekijkers Viper HD 10x50

Lees hieronder de 📖 handleiding in het Nederlandse voor Vortex Viper HD 10x50 (7 pagina's) in de categorie Verrekijkers. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7

Ocular Lens

Strap

Attachment

Locking

Diopter

Center Focus

Reticle Focus

Twist-up Eyecup

Tripod Adapter Socket Objective Lens

Properly Focus the Binocular

For the best views, follow this two-step process to properly adjust

the center focus and diopter. Choose an object about 20 yards

away and stay in the same spot until you have adjusted the

binocular for your eyes.

1. Adjust the center focus. Start by closing

your right eye or covering the right

objective lens with your hand. Focus

your left eye on the object and adjust

the center focus wheel until the image

is in focus. Leave the center focus in

this position as you adjust the diopter.

2. Adjust the diopter. Start by closing your

left eye or covering the left objective

lens with your hand. Look through

your right eye, pull the diopter ring

(found on the right eyepiece) toward

your eye, adjusting the diopter until

the object is in focus. Then, push the

diopter ring back down to lock your

settings. Make note of this diopter

setting in case you need to set it again. From this point on, you

will only need to use the center focus wheel.

Product specificaties

Merk:	Vortex
Categorie:	Verrekijkers
Model:	Viper HD 10x50
Kleur van het product:	Groen
Gewicht:	804 g
Breedte:	132 mm
Hoogte:	170 mm
Dichtstbijzijnde focus afstand:	2.5 m
Prisma type:	Dak
Vergroting:	10 x
Objective diameter:	50 mm
Exit pupil:	5 mm
Oogafstand:	19.5 mm