Vonyx WM55 Handleiding

Vonyx Microfoon WM55

Lees hieronder de 📖 handleiding in het Nederlandse voor Vonyx WM55 (11 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11

WM55 Wireless Microphone

Ref. nr.: 179.210

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

GEBRAUCHSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.2

ENGLISH

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to

benet fully from all features.

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions

to avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the product, please ask advice from a

specialist. When the product is switched on for the rst

time, some smell may occur. This is normal and will

disappear after a while.

- The product contains voltage carrying parts. Therefore,

do NOT open the housing.

- Do not place metal objects or pour liquids into the

product. This may cause electrical shock and

malfunction.

- Do not place the product near heat sources such as

radiators, etc. Do not place the product on a vibrating

surface. Do not cover the ventilation holes.

- The product is not suitable for continuous us e.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the product from a mains outlet,

always pull the plug, never the lead.

- Do not plug or unplug the product th wet hands. wi

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the product is damaged to such an extent that internal

parts are visible, do NOT plug the product into a mains

outlet and DO NOT switch the unit on. Contact your

dealer. Do NOT connect the product to a rheostat or

dimmer.

- To avoid re and shock hazard, do not expose the

product to rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the product to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10- fuse. 16A

- During a thunderstorm or if the product will not be used

for a longer period of time, unplug it from the mains. The

rule is: Unplug it from the mains when not in use.

- If the product has not been used for a longer period of

time, condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the

product in humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guidelines and follow the instructions.

- Do not repeatedly switch the produ on and o. This ct

shortens the lifetime.

- Keep the product out of the reach of children. Do not

leave the product unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- his product is with speaker inside which can cause If t

magnetic eld. Keep the product at least 60cm away

from computer or TV.

- If this product has a built-in lead- id rechargeable ac

battery. Please recharge the battery every 3 months if

you are not going to use the product for a long period of

time. Otherwise the battery may be permanently

damaged.

- If the battery is damaged, please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- If the product has fallen, always have it checked by a

qualied technician before you switch the product on

again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the oduct with a dry cloth. pr

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the product o prior to unplugging it from the

mains and/or other equipment. Unplug all leads and

cables prior to moving the product.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this product.

- Keep the original packing material so that you can

transport the product in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that p3-he should

read and adhere t o.

The product s been certied CE. It is prohibited to make any changes to the product. They would invalidate the CE certicate ha

and their guarantee!

NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/ °41 F and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also

invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the

warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

OVERVIEW

1. Grill

2. Display

3. ON OFF Switch /

4. Frequency switch

5. Battery compartment 2x AA 1.5V olt

6. Battery compartment 1x18650 3.7Volt

7. ON OFF Switch /

8. USB Charge port

9. Charge indicator

10. Antenna

OPERATION

• Open the battery cover (6) of the microphone receiver and insert the supplied battery. Charge the battery of the

receiver using the supplied USB cable via USB charging port (9).

• Screw the battery cover of the microphone and insert 2x AA 1.5Volt batteries (5), note the polarity!

• Place the receiver in a 6.3 mm microphone jack for example, a mixer, active speaker, amplier, etc.

• Switch on the receiver (7) and microphone (3).

• Synchronisation between microphone and receiver is automatic!

• If the channel is busy or interfering, you can change it manually by pressing selector switch (4).

FIRST TIME PAIRING

• Turn o both units.

• Turn on the microphone whil holding channel select switch. st

• The display will start to ash. Release the switch (display will continue to ash).

• Turn on the receiver, it will ash a few times (4x) and then turn o.

• The receiver has briey made contact with the microphone.

• Turn the microphone o and on again, the units should be paired.

Product specificaties

Merk:	Vonyx
Categorie:	Microfoon
Model:	WM55
Kleur van het product:	Black, Grey
Breedte:	52 mm
Diepte:	52 mm
Hoogte:	245 mm
Soort:	Microfoon voor studio's
Stroombron:	Batterij/Accu
Aan/uitschakelaar:	Ja
Connectiviteitstechnologie:	Draadloos
Diameter:	52 mm
Accu/Batterij voltage:	3.7 V
Aansluiting:	6.35 mm (1/4")
Frequentie:	863 - 865 MHz
Maximale afstand:	50 m
Meegeleverde ontvanger:	Ja
Receiver afmetingen (B x D x H):	115 x 35 x 25 mm
Frequentie microfoon:	40 - 18000 Hz
Batterijtechnologie:	Lithium-Ion (Li-Ion)
Type batterij:	Ingebouwde accu
RF vermogen:	300 mW
Microfoon Signal-to-Noise Ratio (SNR):	90 dB
Microphone Total Harmonic Distortion (THD):	0.5 procent