Vonyx VXA-800 Handleiding

Vonyx Receiver VXA-800

Bekijk gratis de handleiding van Vonyx VXA-800 (9 pagina’s), behorend tot de categorie Receiver. Deze gids werd als nuttig beoordeeld door 40 mensen en kreeg gemiddeld 4.6 sterren uit 20.5 reviews. Heb je een vraag over Vonyx VXA-800 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/9

VXA Amplier Series

Ref. nr.: 172.050 / 172.052 / 172.054 / 172.056 / 172.058

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

GEBRAUCHSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.3

INSTALLATION

Connecting Output

Make sure the amplier is turned o before you wire the system. Speakers can be connected using speaker NL4

plugs or bare wire for your binding post output connectors. Using the guidelines below select the appropriate size

of wire bases on the distance between the amplier and speaker.

Distance Wire Size

<10m 1.5mm2

>10m <20m 2.5mm2

>20m <30m 4.0mm2

Setup operation mode

Amplier can used in 2 modes:

1. Stereo operation

Set the mode selector (3) to the ‘stereo’

position.

In this mode the amplier have two in

depended channels with their own inputs and

volume controls.

2. Bridge operation

Set the mode selector (3) to the ‘bridged’

position.

This mode combines both amps on one

channel which results in double power on

this channel. Connects the signal to the A

input channel and the output level can now

be adjusted with the A volume control.

Connect the speaker across the positive (+)

output terminals. Do not use the negative (-)

terminals when the amplier is being

operated in bridged mode.

NOTE: Never connect a hot (+) output to ground or (-) output and never connect the hot (+) to other hot

outputs!

Connect to mains power

Before plugging the unit in always make sure that the power supply matches the product specication voltage. First

connect the IEC end of the cord set to the IEC connector on the amplier then plug the other end of the cord set to

the AC mains.

Please read instructions below for reliable and problem free use:

• Be sure all connections made are made in the correct way.

• Check if the connected speakers are compatible with the amplier.

• Ensure there is adequate ventilation.

• Prevent exposure to moisture.

• Never plug speakers in/or out while in use, this can result in serious damage.

Product specificaties

Merk:	Vonyx
Categorie:	Receiver
Model:	VXA-800
Kleur van het product:	Zwart
Gewicht:	7300 g
Breedte:	295 mm
Diepte:	482 mm
Hoogte:	88 mm
Connectiviteitstechnologie:	Bedraad
Bedoeld voor:	Optreden/podium
Aantal per verpakking:	- stuk(s)
Audio-uitgangskanalen:	2.0 kanalen
Frequentiebereik:	10 - 20000 Hz
Signaal/ruis-verhouding:	90 dB
Crosstalk (1kHz):	70 dB
Totale harmonische vervorming (THD):	- procent
AC-ingangsspanning:	220 - 240 V
AC-ingangsfrequentie:	50 Hz
Input sensitiviteit:	775 mV
Piekvermogen per kanaal:	- W
Synchronisatie ingangsimpedantie:	20000 Ohm
Speakers connectiviteit type:	NL2
RMS vermogen uitvoer per kanaal (4 Ohm):	400 W
RMS vermogen uitvoer per kanaal (8 Ohm):	300 W
Dempingsfactor:	250
Bridge-mode vermogen uitvoer per kanaal (8 Ohm):	800 W